Новостная лента
Thomas Wirsching
добавил новый фотоальбом.
добавил новый фотоальбом.
15 20 July, 13:27
Thomas Wirsching
Thank you Kate and Mathias. That gras diorama piece was from dennisminiaturesdesign.de/shop/diorama/ a german producer of 3d printed figures and some other stuff. I´ve bought it from Modellbau König in Germany. I am not sure if they still carry it. I was not overly impressed as I had to cut quite substantial parts of the corners because the grass was applied irregularly there and looked ugly. I got a discount for that by the dealer and kept it for a while didn´t knew what to do with it until I decided for this diorama.. For this small scenario it did fit perfectly 😊
Thank you Kate and Mathias. That gras diorama piece was from dennisminiaturesdesign.de/shop/diorama/ a german producer of 3d printed figures and some other stuff. I´ve bought it from Modellbau König in Germany. I am not sure if they still carry it. I was not overly impressed as I had to cut quite substantial parts of the corners because the grass was applied irregularly there and looked ugly. I got a discount for that by the dealer and kept it for a while didn´t knew what to do with it until I decided for this diorama.. For this small scenario it did fit perfectly 😊
3 October, 19:16
Doubtingmango
The grass certainly looks great after you finished with it, and those figures are stunning!
The grass certainly looks great after you finished with it, and those figures are stunning!
3 October, 22:22
S B
владеет этим предметом
владеет этим предметом
Nakajima B6N2 Carrier Attack Bomber Tenzan (Jill) Type12
Hasegawa 1:48
09061 (JT61) 1998 Новая разработка 4 October, 10:29
Juan manuel González Campos@Joern Semrau
Guten Morgen, ich interessiere mich für den Artikel Enterprise 1701 von Revell. Es wäre möglich, mir einen Gesamtbetrag inklusive Versand zu nennen, egal ob per Post oder Agentur nach Spanien. Ich hoffe, dass die Übersetzung akzeptabel ist. Danke
Guten Morgen, ich interessiere mich für den Artikel Enterprise 1701 von Revell. Es wäre möglich, mir einen Gesamtbetrag inklusive Versand zu nennen, egal ob per Post oder Agentur nach Spanien. Ich hoffe, dass die Übersetzung akzeptabel ist. Danke
29 September, 10:37
Joern Semrau
Hallo Juan Manuel, danke für Deine Nachricht. Der Transport nach Sapnien würde € 16,49 kosten. Ich habe gesehen, dass der Karton beschädigt ist, der Inhalt aber in Ordnung. Daher würde ich Dir den Bausatz für € 25,00 verkaufen.
Inklusivce Portokosten müsstest Du mir € 41,49 bezahlen. Gerne mit PayPal als Freund (ohne Gebühren) oder Banküberweisung.
Viele Grüße
Joern
Hallo Juan Manuel, danke für Deine Nachricht. Der Transport nach Sapnien würde € 16,49 kosten. Ich habe gesehen, dass der Karton beschädigt ist, der Inhalt aber in Ordnung. Daher würde ich Dir den Bausatz für € 25,00 verkaufen.
Inklusivce Portokosten müsstest Du mir € 41,49 bezahlen. Gerne mit PayPal als Freund (ohne Gebühren) oder Banküberweisung.
Viele Grüße
Joern
30 September, 09:51
Juan manuel González Campos
Guten Abend Jörn, teilen Sie mir Ihre Daten mit, wenn Sie können. Ich habe es nicht eilig, da ich diese Woche etwas zu wenig Zeit für die Arbeit habe, um die Zahlung über Pay Pal vorzunehmen. Vielen Dank und eine gute Nacht.
Guten Abend Jörn, teilen Sie mir Ihre Daten mit, wenn Sie können. Ich habe es nicht eilig, da ich diese Woche etwas zu wenig Zeit für die Arbeit habe, um die Zahlung über Pay Pal vorzunehmen. Vielen Dank und eine gute Nacht.
1 October, 18:15
Joern Semrau
Guten Abend Juan Manuel, danke für die nette Nachricht!
meine PayPal ist: joern.semrau@arcor.de
Wenn ich die € 41,49 (ohne Gebühren) erhalten, dann sende ich Ihnen den Bausatz. Bitte die Adresse nicht vergessen!
Herzliche Grüße & einen schönen Abend!
Guten Abend Juan Manuel, danke für die nette Nachricht!
meine PayPal ist: joern.semrau@arcor.de
Wenn ich die € 41,49 (ohne Gebühren) erhalten, dann sende ich Ihnen den Bausatz. Bitte die Adresse nicht vergessen!
Herzliche Grüße & einen schönen Abend!
1 October, 19:41
Juan manuel González Campos
Guten Morgen. Gestern habe ich Ihnen das PayPal-Konto geschickt, ich hoffe, dass alles korrekt ist. Liebe Grüße und ein schönes Wochenende.
Guten Morgen. Gestern habe ich Ihnen das PayPal-Konto geschickt, ich hoffe, dass alles korrekt ist. Liebe Grüße und ein schönes Wochenende.
4 October, 09:41
Joern Semrau
Hallo Juan Manuel, ja, das Geld ist angekommen. Leider waren doch Gebühren von PayPal enthalten. Es sind nur € 40,11auf meinem Konto gutgeschrieben worden. Am Wochenende mache ich das Paket fertig und am Montag geht es auf die Reise zu Ihnen.
LIebe Grüße und ein schönes Wochenende!
Hallo Juan Manuel, ja, das Geld ist angekommen. Leider waren doch Gebühren von PayPal enthalten. Es sind nur € 40,11auf meinem Konto gutgeschrieben worden. Am Wochenende mache ich das Paket fertig und am Montag geht es auf die Reise zu Ihnen.
LIebe Grüße und ein schönes Wochenende!
4 October, 10:29
Soeren R.
пометил этот товар как заказанный
пометил этот товар как заказанный
F-4J Phantom II Interior 3D Decal for Zoukei-Mura kit
Quinta Studio 1:48
QD48055 2020 Новая разработка 4 October, 10:25
Soeren R.
пометил этот товар как заказанный
пометил этот товар как заказанный
F-4С Phantom II interior 3D decals for Zoukei-mura SWS kit
Quinta Studio 1:48
QD48159 2021 Новая разработка 4 October, 10:24
Mike Szwarc
добавил новый фотоальбом.
добавил новый фотоальбом.
7 23 September, 02:31
Mike Szwarc
I got the Mod 11 Block 1B version of this kit because I found it on sale for a good price. What I didn't know (until I started building it) is that this kit is basically RPG's MK -15 Phalanx CIWS kit plus the different parts needed to build the Mod 11 Block 1B version. I wasn't paying close enough attention to the instructions when I started building, and ended up assembling the tracking radar enclosure using a panel for the standard MK-15, and I didn't catch the error until after the glue had set. While trying to figure out what to do, I discovered that this kit had all the parts to build the standard version, so I downloaded the instructions from Scalemates, and happily continued building the standard MK-15 . . . until I got to the barrel assembly. I had to drill out the barrel support blocks with much larger drills than indicated in the instructions, and then when I test fit the barrel assembly to the gun mechanism, I discovered that the barrels were about 7 or 8 mm too short. The Mod 11 Block 1B uses a shorter barrel. I eventually solved the problem by affixing a piece of brass tube to the gun mechanism to lengthen the socket that accepts the end of the barrel assembly. Once painted and assembled, the fix shouldn't be too obvious.
I got the Mod 11 Block 1B version of this kit because I found it on sale for a good price. What I didn't know (until I started building it) is that this kit is basically RPG's MK -15 Phalanx CIWS kit plus the different parts needed to build the Mod 11 Block 1B version. I wasn't paying close enough attention to the instructions when I started building, and ended up assembling the tracking radar enclosure using a panel for the standard MK-15, and I didn't catch the error until after the glue had set. While trying to figure out what to do, I discovered that this kit had all the parts to build the standard version, so I downloaded the instructions from Scalemates, and happily continued building the standard MK-15 . . . until I got to the barrel assembly. I had to drill out the barrel support blocks with much larger drills than indicated in the instructions, and then when I test fit the barrel assembly to the gun mechanism, I discovered that the barrels were about 7 or 8 mm too short. The Mod 11 Block 1B uses a shorter barrel. I eventually solved the problem by affixing a piece of brass tube to the gun mechanism to lengthen the socket that accepts the end of the barrel assembly. Once painted and assembled, the fix shouldn't be too obvious.
23 September, 11:59
Soeren R.
пометил этот товар как заказанный
пометил этот товар как заказанный
interior 3D decal
Ka-27PL (Military Version) for HobbyBoss | w/ 3D-printed resin parts Quinta Studio 1:48
QD+48357 2023 Новая разработка 4 October, 10:24
Oliver Peissl
добавил новый фотоальбом.
добавил новый фотоальбом.
16 4 October, 02:00
Gary Victory
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
4 October, 06:36
BAT21
добавил новый фотоальбом.
добавил новый фотоальбом.
23 3 October, 12:03
Anatolii Smyshliaiev
Excellent work. And mine has been standing unpainted for several years. Only in the Mi-10PP version with a container of electronic interference.
Excellent work. And mine has been standing unpainted for several years. Only in the Mi-10PP version with a container of electronic interference.
3 October, 19:21
Neuling
Clean and careful work on this interesting helicopter. Very appealing paintwork!
Clean and careful work on this interesting helicopter. Very appealing paintwork!
4 October, 10:20
Edouard Carr
добавил новый фотоальбом.
добавил новый фотоальбом.
43 изображения
Iron Maiden - Aces HighНовый: 3 October, 19:05 1:32
Eddie getting comfortable
Проект: Iron Maiden Aces High
12 12 August, 17:43
Edouard Carr
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Sean
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
29 September, 21:49
Edouard Carr
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
4 October, 10:19
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo