Новостная лента
Peter L.добавил новый фотоальбом.
27 August, 19:18
Rob Nieuwenhovenдобавил новый фотоальбом.
10 22 March 2019, 00:44
Andrew PBeautiful! Excellent little kit, too.
How did you get it to sit on its nose? Mine is tail-heavy.
26 August, 12:49
Rob NieuwenhovenIf you have a look at the cockpit build photos, you can see all the lead shot. I stuffed it anywhere that wasn't visible!
27 August, 04:40
RandoNicely done, fun kit. The nose weight is indeed tricky, I had to add more to inside the engine compartment, but you can hardly see in there.
27 August, 10:40
Andrew PI see it now. Nicely done!
I replaced my nicely detailed Lycoming engine with 13gr of lead sinkers secured with 5-min epoxy. Works a champ!
27 August, 17:48
John Hughesдобавил новый проект.
2 27 August, 18:32
John HughesHi Robert, I'm hoping to find a second kit so I can make both versions. Having said that, these cars seem to have been continually modified over the years.
27 August, 19:19
John Kauckдобавил новый фотоальбом.
20 23 August, 22:16
MiniArt 1:35
Łukasz Glińskiдобавил новый фотоальбом.
14 23 August, 20:54
Łukasz GlińskiForgot to photograph the cockpit before adding the canopy - hope you forgive me that 😛
25 August, 19:58
Mr DComing along nicely 👍
Did you use masking fluid on the canopy??
Thanks for uploading... interesting build 😃👍
25 August, 21:16
Łukasz GlińskiYes Mr D, I went for the fluid as I found I haven't stocked my stash with the masks for this particular kit. Hope they will work well enough.
26 August, 19:00
DerMattesдобавил новый фотоальбом.
10 24 August, 13:21
Michael RotthoweSince I have started the exact same kit, turning it into a Marineflieger 104 with Kormorans, I will most definitely be following 🙂
26 August, 15:02
DerMattesDanke Bernd 🙂
@Michael I only have the kit without the Marineflieger decals, hence the Peddinghaus ones. I 3d printed the Kormorans with the specific pylons for the F-104G. They were designed by cults3d.com/@Sufa312 after photos I have taken at the Wehrtechnische Studiensammlung in Koblenz. I think he did a great job and the files are free 🙂
26 August, 15:22
S Mдобавил новый фотоальбом.
30 изображения
Heinkel He 162B-4 Swedish markings
1:72
Проект: Heinkel He 162B-4
25 19 August, 13:55
SkyhikerWhat does that aqueous black surfacer 1000 thin down with? Isn't aqueous a water based paint? Does it work well as a primer or does it peel off like the acrylic "primers"?
21 August, 20:19
S MI haven't tried to thin it with water although it is promised to work. I could airbrush mr.surfacer 1000 without thinning with my old 0,4mm needle airbrush, but in case I want to thin it I use Mr.Hobby Color Thinner 400 (turqoise colored bottle). I think this works very well as a primer. It sticks and it can be smoothed with sand paper.
22 August, 14:52
AlbertoNice work so far, watching! I also use aqueous black surfacer. I thin it 50% with Tamiya's X20A, spray it with a 0.4 mm needle at 15-17 psi. It works a treat.
22 August, 16:53
SkyhikerThanks for the info on the surfacer. I'm looking for alternatives to using heavy chemicals, and hopefully this will be an answer.
23 August, 08:53
S MWelcome, mates! 😄 @Skyhiker I just tried and it seems you can thin aqueous surfacer with water. I didn't paint anything with it yet.
24 August, 22:12
Thomas KolbI am all eyes! Very cool indeed! I was initially quite baffled with the Swedish markings, the "what-if" went over my head.
25 August, 08:09
Robert PodkońskiLooks fabulous! What will land on your bench next? A He162 perhaps? 😉
27 August, 17:19
Kesa TihoI built a similar model once of the He-162A1 and but just 1:48. Hope you has as much fun as i did
27 August, 17:29
Thomas KolbThis turned out lovely. The metal effect on the pulse jet housing is amazing, care to explain how you did that?
27 August, 17:32
S MThanks, mates! @podkon I have atleast 4 He 162-based ideas left currently. @Mimoid I primed it with black aqueous surfacer that I polished, then airbrushed Vallejo's acrylic metal paints, then clear varnish and lastly Tamiya's Weathering master powders.
27 August, 17:45
Rui Reisдобавил новый фотоальбом.
7 изображения
OH-6A of the PoAF - Finished
1:72
Проект: "What-If" OH-6A of the PoAF
27 August, 19:14
Maciej T.добавил новый фотоальбом.
4 5 June, 20:48
Patrick HagelsteinInteresting marking choices on this one. Let's see what it turns into. 👍
5 July, 14:37
Maciej T.Very unusual 🙂 In my country - Poland - a messerschmitt with a red and white checkerboard is almost "impudence" 😄
5 July, 15:29
Patrick HagelsteinI had a little go at this exact scheme myself:
WIP Bf109-G10 Croatia | Album by Hagel (1:72)
I'm waiting for the 1/72 Eduard G-14/AS to do it again as I like the way this bird was overpainted and weathered.
6 July, 11:15
Eric Duvalдобавил новый фотоальбом.
28 изображения
Extra 330 LC EVAAE 1/72 BRENGUN 
1:72
Проект: Extra 330 LC EVAAE
12 29 March, 21:20
Łukasz GlińskiNo way these figures are 1/72, are you sure you picked the correct scale in the description? 😮
27 May, 09:03
Robert PodkońskiBeautiful! Now I am shy to assemble the same kit... it will never turn out so pretty 😉
27 August, 18:54
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo