M50 A1 Ontos
Комментарии
3 4 October 2012, 14:15
![](/profiles/img/11448-518-s.jpg)
Hi Mates
Here is my little cute Ontos .The Basicpart is almost done(only Hatch and some little things).
It goes on with the rifles.
But on the rifle tubes will be some wire,a time consuming part (kotz 🙂
4 October 2012, 14:31
![](/profiles/img/11448-518-s.jpg)
On my Pershing i made the fault to punch the bolts through the Photoetch on the sideskirts(as told in the instruction).But when you do this ,you can not add an accurate pin wash around the bolts(so i did fake shadows on the underside of the bolts with a brush with Vallejo camo black.Looks OK so far because the weathering will cover a lot ).
On the Ontos i didnt that.I marked the location of the Bolts and punched it out with my 2 Punch and Die sets (hexagonal and round)They both were a Birthdaypresent ,given by myself 🙂
Have a look ,Mates
4 October 2012, 14:40
![](/profiles/img/11091-s.jpg)
Excellent!! I like the new bolts! You sure are a busy person with all this armor being built. where do you put it all?
4 October 2012, 15:24
![](/profiles/img/11448-518-s.jpg)
Thanks,Dave :-D
My first vitrine (shrine??) is filled with a sherman(Landing in sicily) ,a churchill AVRE(the Bunker Buster),the Pershing ,and a Maschinenkrieger Melusine.I will soon take a picture.I build very slow ,and when iam on the bench iam much to hastily because i got not so much time.But i think thats a problem to all modellers!
My addiction is to end the whole project (includes figures and dios).Its hard for me to put a modell on a socket and thats it (like the Pershing ,it breaks my heart to see it on this wooden socket and not in a Dio,but i got the "modelling blues "with that tank.Iam glad to made the figures in a way you can look at it!
So after the Ontos ,the Pershing will get his rest where he belongs.In a ruined city somwhere in germany.
4 October 2012, 15:46
![](/profiles/img/11091-s.jpg)
Excellent work so far. I like watching, it gives me clues on how I can make mine better.
4 October 2012, 15:56
![](/profiles/img/11448-518-s.jpg)
Ohhuhhh ,Dave .
This is one of the sentences that make me .......Blush 🙂
Partiieennnncceeeeeee (i hate this word)
4 October 2012, 16:11
![](/profiles/img/11091-s.jpg)
No, there aren't any kits in 1/72 (so far). I have a few models in 1/35 that I have yet to build, so I look at techiques for both scales.
4 October 2012, 16:22
![](/profiles/img/11448-518-s.jpg)
Ok,man (sweat)!
So i dont have to rush this thing 🙂
But the deadline for the groupbild is set around december.
But i know that all the members of the groupbild are not the fastest( haha).
No.......only kidding ,dont pace the speed,Mates.
4 October 2012, 16:32
![](/profiles/img/11448-518-s.jpg)
Thanks ,Stefan
I got a walkaround ,so i "hope" the upper half will be no problem (attention ,rivet counters 🙂
Can it be that we meet on a convention but dont even know it???
4 October 2012, 17:02
![](/profiles/img/11598-258-s.jpg)
Great start Markus, nice work on the photo-etch, did the P/E come with the kit or an after-market accessory, or haven't I been paying attention...
4 October 2012, 17:09
![](/profiles/img/11448-518-s.jpg)
Hi Steve
Both. I use a ET models aftermarket photoetch kit,and there i a little photoetch fret with the academy kit.For the exhaust i used the academy photoetch because the ET one burned up in flames(no joke,i try to heat it ,because it would better bend into a round shape,but the mesh went up into flames).But the academy photoech is equal.
4 October 2012, 17:16
![](/profiles/img/10923-723-s.jpg)
Great result with the etch parts, I'm looking forward to the next steps, keep the pix comming Markus, awesome job my man, greetz Phil
4 October 2012, 17:21
![](/profiles/img/11448-518-s.jpg)
Thanks ,Phil
I will do my best with my speed to bring it under the (Air)brush.
:-D
4 October 2012, 17:48
![](/profiles/img/10803-s.jpg)
Excellent start! Like the muffler, even the first burned up. Good luck on this one!
4 October 2012, 17:55
![](/profiles/img/11448-518-s.jpg)
Lol @ Christian
Realy it went to the ceiling,belive me mate!
I wasnt ready for this , my first reaction was ........Holy ssshh.....ockolade !!
:-D
4 October 2012, 17:59
![](/profiles/img/10803-s.jpg)
Believe me, I know this feeling for many many times! You tried the best for an hour and messed it up within some seconds. In those cases an ice cold beer is my first choice.
4 October 2012, 18:03
![](/profiles/img/11448-518-s.jpg)
Thank god it wasnt a try for houres.With the fenders it all went well.But the mesh burned up in flames.If i had spend an hour on the muffler,and all then were for the garbage bin,i throw this thing perhaps out of the window,and if i got a beer drunk it went 100 prozent out of the window! 🙂
4 October 2012, 18:13
![](/profiles/img/10427-s.jpg)
I wouldn't expect anything less from Markus...🙂
Great PE details - I am thinking what it will be like once painted...
4 October 2012, 18:14
![](/profiles/img/11448-518-s.jpg)
Augie ,i will keep this the whole night long with me
:-D
4 October 2012, 18:39
![](/profiles/img/10427-s.jpg)
Your ...'perishing' ? lol 🙂 (someone had one drink too many)
4 October 2012, 18:43
![](/profiles/img/11448-518-s.jpg)
I dont want to step on it ,Aghis
Augie can be very "aggressive" 😉
4 October 2012, 18:46
![](/profiles/img/10938-s.jpg)
@markus yes we did meet once in a blink,i believe it was at moveleo but am not sure off it.Missed each other at mol.
4 October 2012, 19:00
![](/profiles/img/11448-518-s.jpg)
Thats sad ,man.
Were will you be next?? Iam at the scale model factory on the 14 october!
4 October 2012, 19:04
![](/profiles/img/11448-518-s.jpg)
uhhhh ....like our Cats .They scratch dont bite!🙂
4 October 2012, 20:30
![](/profiles/img/11448-518-s.jpg)
Hi ,Zimmi
I use CA glue for the PE.Iam still searching for a good soldering iron.
5 October 2012, 17:04
![](/profiles/img/10938-s.jpg)
@ markus that probably going to be at lier 9th December still a long time....
5 October 2012, 17:37
![](/profiles/img/11448-518-s.jpg)
@Stefan
I will try my best to bring it to Lier 🙂
@Frank
Lol
6 October 2012, 07:04
![](/profiles/img/11598-258-s.jpg)
Frank said: Hi Markus, your "pyramid on tracks" is progressing well. Love it!
Ha! yeah! I see what you mean... One of those Inca/Aztec ones😄
6 October 2012, 07:10
![](/profiles/img/11448-518-s.jpg)
I think the us army tried to imitate ......
What was build long ago for 1000 's of years(pyramid) and is still there,can only last a long time.🙂
6 October 2012, 14:13
![](/profiles/img/11598-258-s.jpg)
Actually it makes sense for the designers to make it that shape for the strength value alone...
6 October 2012, 17:35
![](/profiles/img/11448-518-s.jpg)
Thats right,Steve.A very steep(?) angle to repel bullets and other ammo i think.
But the space inside must be horrible.Like in a sardine can.Loud,smelly,tight.
6 October 2012, 17:55
![](/profiles/img/11448-518-s.jpg)
Lol ,Steve
There we have the favourite topic of my son!
6 October 2012, 18:02
![](/profiles/img/11448-518-s.jpg)
Fart and burp.
The world of a 6 year old boy(besides Lego,Transformers,and to bother his sister ) 🙂
6 October 2012, 18:06
![](/profiles/img/11598-258-s.jpg)
It's also my favourite, I love schoolboy humour. Have you heard of this french guy:
en.wikipedia.org/wiki/Le_P%C3%A9tomane
Also:
Youtube Video
![](https://img.youtube.com/vi/evwLzR57wsc/maxresdefault.jpg)
6 October 2012, 18:12
![](/profiles/img/10232-810-s.jpg)
Its strange, obviously all young boys loves farting and burping. My mother convinced that;)!
6 October 2012, 18:17
![](/profiles/img/11448-518-s.jpg)
Lol :-D
My father had a book wirh explanations of different farts .very funny
6 October 2012, 18:19
![](/profiles/img/10656-s.jpg)
just read through all this..so you are really planning to come to Lier convention ??
6 October 2012, 20:42
![](/profiles/img/11448-518-s.jpg)
Hi ,Mates
The Ontos is allready finished with the build.One piece was missing in the Kit (its to place the two lower Barrels.)But the missing pieces are on their way.Meanwhile i will paint the Body ,and do the rest on the upper half later.A additional rack on the left side is added.It is sometimes seen on Original Fotos (although on the right side,but the exhaust is in the way.So i think it looks better on the left side.Artistic freedom 🙂
30 October 2012, 07:52
![](/profiles/img/10923-723-s.jpg)
Looks awesome Markus, can't wait to see it with some paint on, great job so far, it's another master piece from the master himself, greetz Phil
30 October 2012, 17:59
![](/profiles/img/11448-518-s.jpg)
Many Thanks ,Phil.
And thanks for the Master but thats a bit to much to receive advance praise (in German its called"Vorschusslorbeeren")
I think tomorrow i begin with the Paint.Good luck to myself 🙂
30 October 2012, 19:31
![](/profiles/img/11448-518-s.jpg)
Hi,Mates.
Tamiya XF 58 was sprayed.Again you can see colour modulation (red arrows).But this time its not so obviously as on my Pershing.And it was easier to do as on the Pershing.Next step is painting all the outer stuff like bolts ,jerry cans,Wheel rims etc.
See at Pic 16
31 October 2012, 10:50
![](/profiles/img/11448-518-s.jpg)
Thanks ,Mates
Perhaps there will be an update tomorrow.
Thanks for your great comments (blush)
31 October 2012, 15:56
![](/profiles/img/11448-518-s.jpg)
The missing pieces for my Ontos are on the Way.There will be here in the middle of November.🙂
1 November 2012, 10:12
![](/profiles/img/10976-s.jpg)
I will follow this as a guideline for the paint of the sherman at the bench at the moment. Building process will proceed today after a 3 week model building break.
1 November 2012, 12:04
![](/profiles/img/11448-518-s.jpg)
Thanks ,Mates for your great comments.
I was ill the last days ,sorry there are no new WIP pics.Today iam feeling better ,perhaps i do a little work this evening.
4 November 2012, 09:57
![](/profiles/img/10638-s.jpg)
Hi Markus,
hope you are OK now!!
Nice to see the fine details and the entire progress of your work! Thx that you will show the steps of your paint techniques!
The photoetched parts looking soo great, for example the exhaust. Looks so technical!
Amazing work.
4 November 2012, 18:29
![](/profiles/img/11448-518-s.jpg)
Thanks ,Dirk!
It wasnt that easy with the exhaust.I heat the first mesh and it went up in flames(wirklich,ist einfach verbrutzellt).I want to make it to bend easier.But luck was on my side ,i had a new try with seperately buyed photoetch.All went good.
4 November 2012, 19:08
![](/profiles/img/10638-s.jpg)
Nooo, it went up in flames?? Sry, I must laugh a bit, but it sounds like a bad joke!! Omg! Puff and away....... oo
It looks very difficult to bend this little part.
Chapeau!
Now you wear the title... Master of flaming photo-etches 🙂
4 November 2012, 19:13
![](/profiles/img/11448-518-s.jpg)
Yes ,Dirk.
I just laughed as well as you did but it was more like ......heilige scheis.......e
But i had to laugh at first , too.
But thanks Mate for this title....! Lol
4 November 2012, 19:23
![](/profiles/img/11448-518-s.jpg)
@Dirk
Alle runden sachen sind irgendwie übel zu richten.Dann lieber en paar knicke .Aber so richtig rund ,und dann anpassen ,da is noch en bischen übung übrig 🙂
Bin ja noch jung und lernfähig. :-D
4 November 2012, 19:28
![](/profiles/img/10638-s.jpg)
Sieht abba perfect aus!!
Es soll ja so ne biegehilfe für runde und auch für konische Figuren geben! Geh mit der Anschaffung schon länger schwanger. Hab da die selben Probs.... öööh
4 November 2012, 19:36
![](/profiles/img/11448-518-s.jpg)
Die besten "tools " sind nichts wenn du nicht weisst wie du sie nutzen sollst.🙂
4 November 2012, 19:58
![](/profiles/img/11448-518-s.jpg)
The best tools are nothing if you dont know how to use them. 🙂
4 November 2012, 20:10
![](/profiles/img/10638-s.jpg)
HaHaHa,
Holger that`s right!
So I am not surprised as I did the same mistake!
No briefing and zack......a son!!!
Maybe the tools don`t work correctly.............
🙂
5 November 2012, 07:57
![](/profiles/img/11448-518-s.jpg)
Hi Mates
I will be away for 3 weeks on Health cure.So no updates.
Have a good time,and happy modeling 🙂
7 November 2012, 06:42
![](/profiles/img/10232-810-s.jpg)
Oh Markus, i wish you a fast recovery from wharever may itsch you! Hey, a tip: Smuggle some paintjars with you, so you can sniff on it when the nurses are not looking at you!;)
Now without joking: All the best to you, my buddy! If you need any help or hints (medical) feel free to contact me!
Groetjes Holly;)
7 November 2012, 07:12
![](/profiles/img/11598-258-s.jpg)
Good luck buddy... 3 weeks away from modelling would be like doing cold Turkey for me...Lol🙂🙂🙂
7 November 2012, 07:25
![](/profiles/img/11448-518-s.jpg)
Thanks ,Mates
@Holger Lol
Things went a little tough the last months,i feel a little tiered.
Must get some energy and find my balance in life again.
All will be allright.Dont worry to much.
I will be glad to be on my workbench again.
All the best for you all .
Greetz .....Markus
7 November 2012, 07:28
![](/profiles/img/10232-810-s.jpg)
Markus, i know what you will go through! No question, you´ll make it!
7 November 2012, 07:34
![](/profiles/img/10803-s.jpg)
Whish you all the best markus! From time to time everyone needs a break for "reloading" So make the best out of it!
7 November 2012, 09:23
![](/profiles/img/10638-s.jpg)
Hi Markus!! Wish you good luck and recover soon, my friend!! I cross my fingers that you will find the right balance between Yin and Yang!!!
Greetz
Dirk
7 November 2012, 13:38
![](/profiles/img/10923-723-s.jpg)
Recover soon Markus, wish you al the best my friend, greetz Phil
7 November 2012, 15:20
![](/profiles/img/11067-733-s.jpg)
Take care Markus, get well soon and please return to Scalemates asap.
I can't handle this bunch of lunatics on my own, I need youre assistance !
7 November 2012, 17:38
![](/profiles/img/10427-s.jpg)
Are u gonna grow long hair again ??? 🙂 We 're gonna miss you Markus! 😉
8 November 2012, 17:05
![](/profiles/img/11448-518-s.jpg)
Hi Mates
From Pic.20 is an update .I think the Chassis is finished (please let me know if you have an other opinion)
Tracks will be added tomorrow.
12 December 2012, 18:36
![](/profiles/img/11448-518-s.jpg)
Thanx Mates :-D
The dust and the typical vietnam red dust are oilcolors mixed with enamel. At the running gear its mixed Tamiya (flath earth with orange and red) paints to get the color.
12 December 2012, 18:58
![](/profiles/img/10685-859-s.jpg)
@Holger: Ich glaube, Markus schaut in den Spiegel und holt sich dabei Anregungen, wie man einen Bausatz RICHTIG altert. 🙂
12 December 2012, 19:12
![](/profiles/img/10976-s.jpg)
Welcome back markus. You did a hell of a paint job. Amazing!
12 December 2012, 19:12
![](/profiles/img/10803-s.jpg)
Excellent work so far ! Looks perfect! How do you paint the wooden tool grips? They are looking absolute convincing. This will be a great model.
12 December 2012, 19:17
![](/profiles/img/11448-518-s.jpg)
@Acki. Lol
@Christian M.
Base are light color Vallejo .Then oils like burnt sienna and umber (streaks).
Again light streaks with oil buff.Somehow all will come together.I try so long till i find it OK.
12 December 2012, 19:29
![](/profiles/img/10638-s.jpg)
Holy crab!!!!
That`s Art!!! So fu..ing unbelieveable virtous!!! I`m speechless when I have a look on your painted model!
Please let me be your adept and let me study your dexterity work lesson for lesson in complete isolation from foreign influence!!
Where is your painting monastery?????
No joke, I`m absolutely impressed about it!
Cool!!
Greetz
Dirk
12 December 2012, 19:37
![](/profiles/img/11448-518-s.jpg)
@Dirk
A monastery for model builders would be great.But whats about the celibacy?? 🙂
Thank you very much Mates for all your great comments .They lift me up. :-D
12 December 2012, 19:44
![](/profiles/img/10638-s.jpg)
I will pray to the master of colours every day.
I want to keep it holy, and in honour of all colours and models.
Thou shall not deny the colour and the master of colour
and see
there will come a Markus
to show us the way
Psalm6 . 7 Chapter 4The ways of painting, Colour Bible (1.Edition)
12 December 2012, 19:54
![](/profiles/img/11448-518-s.jpg)
Buaaaaaaaaahhhhaaaaaaaa LOL. Rofl
Now its enough 🙂
I thought Mig Jimenez has brought out the Modeling Bible??? 🙂
By the way ......bluuuuushhhhhh
12 December 2012, 20:03
![](/profiles/img/10923-723-s.jpg)
This looks awesome Markus, I love your works mate, it looks so real, can't wait to see it when it's finished,
Greetz Phil
13 December 2012, 07:49
![](/profiles/img/12094-s.jpg)
Loving the intricate weathering, particularly the chipping on the edges which looks amazing... I'll be picking your brain for some tips my friend!
15 December 2012, 22:45
![](/profiles/img/12094-s.jpg)
And I've just seen the tracks. I have to know how you did these...
15 December 2012, 22:46
![](/profiles/img/11448-518-s.jpg)
Hi Andy and Thanks.
I will cut short how i do the tracks (by the way ...i hate vinyl tracks)
No priming.Sprayed the Vietnam earth color from Tamiya XF52 ,X6,little XF7(mixed).
Dust wtih high diluted XF57.Wash with MIG dark wash.Every track retouched with AK Dark Streaming Grime .2-3 layers of "The Army Painter "matt Varnish from the can (in my eyes the best matt varnish,but each taste is differently) Drybrush with Valleyo Oily Steel.Inside where the wheels run dry brush with Valleyo german camo.Chipping with sponge also with Valleyo German camo.
I think thats it. I sometimes dont know all the steps i have done .I try so long till it fits :-D
Hope that helps a little bit.
18 December 2012, 09:27
![](/profiles/img/11448-518-s.jpg)
Hi,Mates.
Stowage on the right Fender is done.Next will be 2 or 3 sandbags on the front under the drivers hatch.
From pic.38 on to see Stowage.
19 December 2012, 11:35
![](/profiles/img/10923-723-s.jpg)
@Zimmi, wat a great idea, indeed he must show his secrets to us 😉
greetz Phil
@ Markus, great looking pieces of art mate, keep the pix comming
Greetz Phil
19 December 2012, 15:55
![](/profiles/img/11448-518-s.jpg)
Thanks Mates,for the great comments (Blush)
Me and a Demo .....ha ha LOL
I will stutter my way in english through this.And because to try to speak correct ,i forget all i know about modelling. No way.
But thanks .I feel very flattered 🙂
Perhaps i try it first on you tube.
@Alberto
Your spaceship is crazy.Great work .Walking in Kow Yokoyamas shoes.I am a fan of Ma.K ,too (see Album).
Thanks again for all your comments :-D
19 December 2012, 18:24
![](/profiles/img/11448-518-s.jpg)
Thanx ,Duncan
(Looks like it was cold that day you took the Pic. 🙂
My missing piece is finally there send by acedemy.Now i can go to finish the gun section and paint it.
Pics will follow.
My friends ,i wish you all a Merry Christmas with lots of modelling stuff under the tree :-D
But most of all i wish you health ,peace and a great new year 2013.
May all your wishes come true.
Greetings Markus and Family. 🙂
23 December 2012, 09:34
![](/profiles/img/11289-303-s.png)
Cool,
By the way how was the Academy Service?
I can still remeber the lousy Tamiya Service.
23 December 2012, 11:53
![](/profiles/img/11448-518-s.jpg)
Hi ,Mates
The wireing is finaly done (thank godness).All cables are there.Now lets paint this 6 shooter.
New pics from 44.
@Duncan
It took 1 and a half month.But Service was ok.No Bill.
9 January 2013, 15:59
![](/profiles/img/10923-723-s.jpg)
Woooow Markus, great job, can't wait to see it with some paint on, give this shooter some color Markus 😉
9 January 2013, 17:31
![](/profiles/img/11448-518-s.jpg)
On pic 46 you see some of the hardest work .After 4 houers my sight was a little dizzy and blurry.
Iam glad its over. 🙂
9 January 2013, 17:47
![](/profiles/img/11448-518-s.jpg)
I dont want to swap with the mates who must do the takelage for a plane or ship. But i think practice makes perfect.
Thanks Phil 🙂
9 January 2013, 17:53
![](/profiles/img/10803-s.jpg)
Hi Markus! In my opinion this is the greatest model you have biuld so far. Like every bit of it. Amazing work! You seperate the guys from the boys 🙂
9 January 2013, 18:57
![](/profiles/img/11448-518-s.jpg)
Many thanks ,Christian 😄
With a clear (free) head a lot goes better.
How is your Duster doing ???
9 January 2013, 19:18
![](/profiles/img/10803-s.jpg)
Well Markus, the Duster is on hold even I bought the Verlinden Crew Set for it. But it`s not forgotten. Think I will finish it within the next two month. Still working on my Henschel 33 D1 Flak Truck. Beside that sometimes I do "Modelling in Scale 1:1" This time it is an NSU Quick Motorcycle from 1948. It was a piece of junk when I got it, but maenwhile it comes out nice. If anyone is interested in restoring old Motorbikes I will post some pictures here. Beside modelling and cooking old Bikes are my alltime favourite hobby. So many things to do, so less time.... But it`s all still fun 🙂
9 January 2013, 19:49
![](/profiles/img/11448-518-s.jpg)
Wow , cool hobbys (modelling ,cooking ,bikes).
And yes ,so much to do and so less time. 🙂
9 January 2013, 19:55
![](/profiles/img/10638-s.jpg)
Markus please forgive me,
but whenever I consider this tank design, it reminds me to Warhammer 40 K!
Believe me, the constructor of this tank was a formerly Games Workshop designer! 😄 😄 😄
I would not be surprised when sitting inside 3 Orcs! 😛 😛
9 January 2013, 21:43
![](/profiles/img/11067-733-s.jpg)
Markus, that's again a wonderful model you're building there, truly fantastic! You can bring such realism in your models with your painting techniques, really cool!
👍
10 January 2013, 06:46
![](/profiles/img/11448-518-s.jpg)
Thanks Mates for your comments 😄
Today and tomorrow the guns will be paintet.
@ Dirk
Yes , the shape of "The Thing" is unique.And you brought me an idea for further projects.
I just say Ma.K . But psssssssssst.
10 January 2013, 08:32
![](/profiles/img/10656-s.jpg)
said it before.... we need Markus doing a demo on a Belgian show somewhere next year 🙂
10 January 2013, 19:55
![](/profiles/img/11448-518-s.jpg)
Thanks Mates
I really appreciate it.
But for the basic painting from the gun section it took 5and a half our.Tooooooooooooo long for a demo! 🙂
Perhaps someday if Zimmy dances in a Thong on a Table,Holger does a Flic Flac,Wilfried burps the ABC backwards,and Dirk juggles with two chainsaws.
Then maybe! 😄
Pics will follow.
11 January 2013, 14:52
![](/profiles/img/11448-518-s.jpg)
Thanks Kevin.
The chassis was allready paintet last year (from Pic 20).But the a piece for the gunturret section was missing and i had to reorder it from a Academy.It took 1 and a half month till i get it.
So iam building on "The Thing" almost to long. But the end is near 🙂
I dont want to get the "Modeling Blues "with it.
By the way you did a very exellent job with your Humvee and Bradley.
Top weathering Job.Great ones in a small scale!
11 January 2013, 15:37
![](/profiles/img/11289-303-s.png)
How was the academy service? I still remeber the lousy Faller and Tamiya Service.
11 January 2013, 15:42
![](/profiles/img/11448-518-s.jpg)
Service not to friendly but ok.Academy Europe ordered it fast,so i dont know why it took 1 and a half month.(Perhaps there was a korean Postman with Bike who delivered it first. 🙂
11 January 2013, 15:49
![](/profiles/img/11289-303-s.png)
sounds better than Tamiya and faller.
Did they send you an confirmation e-mail?
11 January 2013, 16:17
![](/profiles/img/11448-518-s.jpg)
No!!
I grab the telephone 2 times, and send 2 mails with the question how the progress is .
Maybe iam a little impatient.
11 January 2013, 16:30
![](/profiles/img/11289-303-s.png)
I mean after the order. I'm used to it since the Department X servive.
Faller didnÄt sent me a mail at all only a letter after 2 moths that the requested parts are not aviaable and another time they send me a warning that I owe them 15 euros.
And Tamiya don't want to help me. They said only dealers have got a right on spareparts, not the client.
11 January 2013, 16:40
![](/profiles/img/11448-518-s.jpg)
Oh ,that sounds Bad.
No no bill has arrived until now.
11 January 2013, 16:49
![](/profiles/img/11448-518-s.jpg)
Thanks ,Phil 😄
Thats the basic paint job.Next is modulation on the tracerguns ,washes ,oilfading,chipping etc.
My family wont see me for the next weeks 🙂
11 January 2013, 16:59
![](/profiles/img/11448-518-s.jpg)
Got to keep the pace,Kevin!!Its doing fine .Details are painted and now the Filters.
12 January 2013, 10:49
![](/profiles/img/11448-518-s.jpg)
Thanks ,iam working hard on it.!
Spilled my enamel thinner over my workbench (1/3 from the Bottle).
Didnt clean it immediately,first finished the filter on the Pipes.
A alternative way to get High.!! 🙂
12 January 2013, 11:59
![](/profiles/img/11448-518-s.jpg)
Is future realy that better than tamiya clear or other??
Not to get high of course.I mean in use as a varnish! 🙂
12 January 2013, 16:22
![](/profiles/img/11051-s.jpg)
Think T. and Future (now called Pledge) are near together... (I'm using both). But I think, it's my opinion, one of the best is Mr. Hobby - Mr. Metal Primer
12 January 2013, 16:29
![](/profiles/img/11448-518-s.jpg)
Thanks,Mike.I got Mr. Metal ,too.Only used it as a primer for photoetch.Give it a try next time .
12 January 2013, 16:57
![](/profiles/img/11051-s.jpg)
I'm using Future at AFVs and Mr. Metal on planes before applying the decals. Future can, even it's drying 48 hours, react with decal softeners. It happens to me two or three times.
12 January 2013, 17:06
![](/profiles/img/11448-518-s.jpg)
Hi Neil
I personaly dont use it.See the link ,its a good explanation for what to use !
Otherwise " google " can help.
ilovewood001.tripod.com/modeling/future.html
12 January 2013, 17:58
![](/profiles/img/11448-518-s.jpg)
Hi Roy
Thank you much. 🙂 Now iam at work with the Dio.There you can see some more details...
M50 A1 Ontos Details/Diorama | Album by Markus Kutsch (1:35)
Feel free to have a look.
10 March 2013, 06:43
Album info
Picture 51 first pics from the Gun Section(basic paint)!