Panzerhaubitze 2000 - WIP
the box
the tools for the first construction
chassis
chassis
torsion bars
fixation
box with chain links
contents of the box (single parts)
content in piles
first segment
fully movable - without glue
snow grippers and installation help
tracks done - 97 links
tracks done - 97 links
barrel lock for travel - movable!!!
Main gun 155mm
Main gun 155mm
some PE-parts on the upper hull
air intake and other parts
holder of the blade
ready for priming
primed chassis
primed tracks
wheel with stencelit mask - before priming
colors to mix for pre-dusting
pre-dusted chassis
pigments + color for a light muding
mud in the chassis
same chassis with other light
for more contrast
done, always a little bit wet
pigments for a little bit more mud
next "mud-step"
colors for the tracks
primed tracks and painted rubbers
color for the track inside
tracks are ready
chassis with it's "new shoes" - right side
chassis with it's "new shoes" - left side
chassis in detail
drive sprocket in detail /w track
Wedding of Upper hull & chassis
Wedding of Upper hull & chassis
putty work
putty work
Work of one day ...
Enters grid at the rear
Enters grid at the rear - bent
Enters grid at the rear - bent
Etch parts for the grid
Grid ready for use
Grid ready for use
installed grid
Lifting tool on the nose plate
Making the 2nd grid
grid in progress
grid ready for use
mud flaps for the rear
built 😉
License plate - & taillight holder
rear cross
box on the cannon tube - PE and original
mantlet with smoke discharger
baggage basket
Turret in progress
baggage basket in detail
strap fittings
turret ready to paint
gun cradle in detail
V(0) measuring device from behind
older of the front warning light
rear warning light
space of the Ammo loader 1
front of the turret
baggage basket in detail
mesh-wire cover of the compressor storage
both smoke dischargers
My used colors
For masking of the camo spots
The green hull ...
... and the turret
Black spots ...
... also on the turret
masking the brown spots
done
basic paint finished
basic paint finished
basic paint finished
basic paint finished
Painting the barrel cover, called "NATO-Pariser" 😉
PzH 2000 Detailed basic painting & mat silk clearcoat
PzH 2000 Detailed basic painting & mat silk clearcoat
PzH 2000 Detailed basic painting & mat silk clearcoat
PzH 2000 Detailed basic painting & mat silk clearcoat
PzH 2000 Detailed basic painting & mat silk clearcoat
Items still undeveloped
Комментарии
12 April 2015, 08:18
Holger Kranich
That all looks quite nice! And the tracks look like a lot of work!!!
That all looks quite nice! And the tracks look like a lot of work!!!
12 April 2015, 10:12
Steve Wilson
...
I say!!! Is that a 155 mm self-propelled howitzer on yer Tank???
Or are you just pleased to see me???
...
I say!!! Is that a 155 mm self-propelled howitzer on yer Tank???
Or are you just pleased to see me???
12 April 2015, 10:23
Roland Roth
Oh Jesus, Steve ... 😄 😄 😄
Yeah, Holger ... you need you need a lot of patience and time, about 8 hours worked for the tracks.
Another 25%, then I have done😉
Oh Jesus, Steve ... 😄 😄 😄
Yeah, Holger ... you need you need a lot of patience and time, about 8 hours worked for the tracks.
Another 25%, then I have done😉
12 April 2015, 15:46
Roland Roth
The work of one saturday - you can call it "photo-etch day" 😄 (from pic 43)
The work of one saturday - you can call it "photo-etch day" 😄 (from pic 43)
10 May 2015, 10:18
Roland Roth
Weisst du dafür die korrekte, englische Übersetzung, Holger? 😄 😄 😄
Thx for your comments, mates! 👍
Weisst du dafür die korrekte, englische Übersetzung, Holger? 😄 😄 😄
Thx for your comments, mates! 👍
10 May 2015, 15:24
Roland Roth
Muuuuaaaahahahah ...
... aber nicht unrichtig! Tarnkreuz ginge ja auch noch in deutsch - aber camouflage cross ist dann total daneben😉
Muuuuaaaahahahah ...
... aber nicht unrichtig! Tarnkreuz ginge ja auch noch in deutsch - aber camouflage cross ist dann total daneben😉
10 May 2015, 17:37
Roland Roth
When I will create thick mud, Ricardo, then yes - with white glue. Only for "normal" dust of course not ... 🙂
When I will create thick mud, Ricardo, then yes - with white glue. Only for "normal" dust of course not ... 🙂
10 May 2015, 18:31
Roland Roth
After a busy but successful weekend, the chassis is ready for painting😎 👍 (from pic 63)
After a busy but successful weekend, the chassis is ready for painting😎 👍 (from pic 63)
11 May 2015, 17:54
Roland Roth
Hello, mates ...
My howitzer now is ready to paint - and previously was a lot to glue😉 (from pic 76)
Hello, mates ...
My howitzer now is ready to paint - and previously was a lot to glue😉 (from pic 76)
16 May 2015, 17:59
Roland Roth
The camoflage is made. However, there was a lot of effort and difficulty. (from pic 93)
The color made problems in the airgun and the Panzer Putty is not very suitable for camo of the Bundeswehr
The camoflage is made. However, there was a lot of effort and difficulty. (from pic 93)
The color made problems in the airgun and the Panzer Putty is not very suitable for camo of the Bundeswehr
10 January 2016, 11:34
Holger Kranich
What a nice build so far, Roland! Are the pe´s & rear mudguards included in the kit?
What a nice build so far, Roland! Are the pe´s & rear mudguards included in the kit?
11 January 2016, 10:32
Thomas Mayer
Hattu wieder einmal richtig schön gemacht, Roland!
Wie schätzt du die Anwendung von Panzer Putty ein?
Hattu wieder einmal richtig schön gemacht, Roland!
Wie schätzt du die Anwendung von Panzer Putty ein?
11 January 2016, 11:01
Holger Kranich
Tach Thomas, ich hab das Zeug auch zu Hause. Ist nicht schlecht aber man sollte zügig arbeiten da das Zeug mit der Zeit verläuft/sich verformt. Reagiert halt auf die Erdanziehungskraft. Schön ist, dass es nicht nachfettet. Und es absorbiert Farbreste, nach ein paar Tagen war es wieder komplett schwarz.
Tach Thomas, ich hab das Zeug auch zu Hause. Ist nicht schlecht aber man sollte zügig arbeiten da das Zeug mit der Zeit verläuft/sich verformt. Reagiert halt auf die Erdanziehungskraft. Schön ist, dass es nicht nachfettet. Und es absorbiert Farbreste, nach ein paar Tagen war es wieder komplett schwarz.
11 January 2016, 11:05
Steve killick
I've got this one in my stash but as I've already got a completed Revell version I might just do mine in Dutch colours.
I've got this one in my stash but as I've already got a completed Revell version I might just do mine in Dutch colours.
11 January 2016, 17:44
Thomas Mayer
Holgi, ich hab schon meinen Spaß mit Panzer Putty! Erst bekommt man es nicht aus der Dose, dann, zu einer Kugel geformt, zerläuft es in Zeitlupe! Hach!
Holgi, ich hab schon meinen Spaß mit Panzer Putty! Erst bekommt man es nicht aus der Dose, dann, zu einer Kugel geformt, zerläuft es in Zeitlupe! Hach!
12 January 2016, 11:29
Roland Roth
Das mit dem "verlaufen", Thomas, hat man im Griff - so schnell geht das auch nicht.
Aber das Legen der Tarnfleckränder geht bei engen Radien gar nicht.
a) Macht man die Wülste etwas dicker, isses ÄUßERST mühselig, das Muster halbwegs genau hinzukriegen
b) Macht man die Wülste dünner, hat man sehr leicht das "Overspray" und darf (wie ich) viel nacharbeiten
Fazit: Für BW-Flecktarnung nur seeeehr eingeschränkt geeignet.
Von anderen Modellbauern hörte ich, dass hier das UHU TAC um Längen besser sein soll ...
Das mit dem "verlaufen", Thomas, hat man im Griff - so schnell geht das auch nicht.
Aber das Legen der Tarnfleckränder geht bei engen Radien gar nicht.
a) Macht man die Wülste etwas dicker, isses ÄUßERST mühselig, das Muster halbwegs genau hinzukriegen
b) Macht man die Wülste dünner, hat man sehr leicht das "Overspray" und darf (wie ich) viel nacharbeiten
Fazit: Für BW-Flecktarnung nur seeeehr eingeschränkt geeignet.
Von anderen Modellbauern hörte ich, dass hier das UHU TAC um Längen besser sein soll ...
12 January 2016, 17:19
Roland Roth
Leider weiß ich jedoch nicht, ob das TAC auch so oft wiederverwendbar sein soll (oder ist) wie das Panzer Putty. Das würde die Sache dann wieder relativieren ...
Jedenfalls habe ich gerade die letzten Decals aufgebracht.😉
Leider weiß ich jedoch nicht, ob das TAC auch so oft wiederverwendbar sein soll (oder ist) wie das Panzer Putty. Das würde die Sache dann wieder relativieren ...
Jedenfalls habe ich gerade die letzten Decals aufgebracht.😉
12 January 2016, 17:56
Holger Kranich
Uhu TAC ist günstiger und wiederverwendbar ABER: Das Zeug klebt tierisch an Details und ist teilweise kaum zu entfernen! Bei Oberflächendetails wie Luken oder Scharnieren werde ich das nie wieder benutzen. Da wird man beim Resteentfernen wahnsinnig...
Uhu TAC ist günstiger und wiederverwendbar ABER: Das Zeug klebt tierisch an Details und ist teilweise kaum zu entfernen! Bei Oberflächendetails wie Luken oder Scharnieren werde ich das nie wieder benutzen. Da wird man beim Resteentfernen wahnsinnig...
13 January 2016, 08:27
Thorsten Drescher
Die Dose einfach für eine Zeit auf die Heizung legen. Dann wird sie weich und geschmeidig und läßt sich besser verarbeiten. 😉
Die Dose einfach für eine Zeit auf die Heizung legen. Dann wird sie weich und geschmeidig und läßt sich besser verarbeiten. 😉
14 January 2016, 19:22
Roland Roth
Tank howitzer 2000 is provided with decals, the basic detailed painting is finished and the model was sealed with clear cote.
Tank howitzer 2000 is provided with decals, the basic detailed painting is finished and the model was sealed with clear cote.
17 January 2016, 17:18
Album info
I built the MENG modell - and it will be the Bundeswehr version in march position (see title pic) 😉