Junkers EF 128 - Huma - - Finished
Комментарии
23 August 2015, 18:31
Soeren R.
Freut mich 🙂
War ne spontan Idee weil ich ein kleines und einfaches Modell bauen wollte😉
Freut mich 🙂
War ne spontan Idee weil ich ein kleines und einfaches Modell bauen wollte😉
23 August 2015, 19:39
Christian Meyerhoff
Passt schon. Ich habe schon einige Huma`s gebaut und schaue Dir deswegen gerne mal über die Schulter.
Passt schon. Ich habe schon einige Huma`s gebaut und schaue Dir deswegen gerne mal über die Schulter.
23 August 2015, 19:48
Soeren R.
Ich bin jetzt erst wirklich auf Huma gestoßen, nachdem ich mir die Ju 288 und die 287 bei meinem Shop geholt habe. 🙂
Ich bin jetzt erst wirklich auf Huma gestoßen, nachdem ich mir die Ju 288 und die 287 bei meinem Shop geholt habe. 🙂
24 August 2015, 04:38
Soeren R.
🙂 Ja, werde den Bausatz jetzt auch direkt nach der 1099 anfangen und die I-16 erst Mal bisschen nach hinten schieben.
🙂 Ja, werde den Bausatz jetzt auch direkt nach der 1099 anfangen und die I-16 erst Mal bisschen nach hinten schieben.
24 August 2015, 06:15
Soeren R.
👍 Gerade auf der Suche nach den anderen What If Humas.
Finde die Bausätze haben schon was und die kleinen sind ein schönes zwischendurch Projekt! 🙂
👍 Gerade auf der Suche nach den anderen What If Humas.
Finde die Bausätze haben schon was und die kleinen sind ein schönes zwischendurch Projekt! 🙂
24 August 2015, 06:56
Soeren R.
Ich doch immer😉, aber erst nach sagen wir 10-15 vernünftig gebauten Kits 😛
Ich doch immer😉, aber erst nach sagen wir 10-15 vernünftig gebauten Kits 😛
24 August 2015, 08:32
Soeren R.
The cockpit without anything is almost done.
Little bit of dry-brushing and a clear coat and I think its done.
The cockpit without anything is almost done.
Little bit of dry-brushing and a clear coat and I think its done.
2 September 2015, 19:22
Soeren R.
Managed to do a little bit of progess today!
Next step is finishing the cockpit and then comes the marriage between the 2 body parts!
Managed to do a little bit of progess today!
Next step is finishing the cockpit and then comes the marriage between the 2 body parts!
13 September 2015, 17:08
Christian Meyerhoff
That looks very promissing! Do You have any ideas about the camo so far?
That looks very promissing! Do You have any ideas about the camo so far?
13 September 2015, 17:16
Soeren R.
Thx Christian!
I will probably paint it in the camo from the box - so nothing special there! 🙂
Thx Christian!
I will probably paint it in the camo from the box - so nothing special there! 🙂
13 September 2015, 17:26
Christian Meyerhoff
Well, I think that a bare metal finish would look nice on this one.
Well, I think that a bare metal finish would look nice on this one.
13 September 2015, 17:34
Christian Meyerhoff
As I have this kit in my stash as well I plan to do it that way. The mixture of bare metal and wood is very interesting in my opinion.
lexikon-der-wehrmacht.de/Waffen/EF128.htm
Painting the model this way would be a nice addition to Your Horten.
As I have this kit in my stash as well I plan to do it that way. The mixture of bare metal and wood is very interesting in my opinion.
lexikon-der-wehrmacht.de/Waffen/EF128.htm
Painting the model this way would be a nice addition to Your Horten.
13 September 2015, 17:48
Soeren R.
True, but Im also thinking of making a EF 128 in the markings of the JG 400, because my Ho 229, my P.1099 and the upcoming 163 will have their markings.
True, but Im also thinking of making a EF 128 in the markings of the JG 400, because my Ho 229, my P.1099 and the upcoming 163 will have their markings.
13 September 2015, 17:57
Christian Meyerhoff
It`s up to You, have fun! 🙂 BTW... What 163 are You talking about?
It`s up to You, have fun! 🙂 BTW... What 163 are You talking about?
13 September 2015, 18:06
Soeren R.
The cockpit is now ready and the main parts are glued together.
Next step is glueing the wings and then some filling! 🙂
The cockpit is now ready and the main parts are glued together.
Next step is glueing the wings and then some filling! 🙂
8 October 2015, 17:39
Wim van der Luijt
Looks good, I love Luft '46 stuff, this looks like a nice little kit
Looks good, I love Luft '46 stuff, this looks like a nice little kit
8 October 2015, 18:03
Soeren R.
Thx Wim!
Yeah it is really nice but also really basic! 🙂
So a good kit in between
Thx Wim!
Yeah it is really nice but also really basic! 🙂
So a good kit in between
8 October 2015, 18:06
Soeren R.
The wings are only dry fitted, because I stll need to fill and sand some spots on the body
The wings are only dry fitted, because I stll need to fill and sand some spots on the body
10 October 2015, 21:23
Soeren R.
The fit of the canopy is sadly nowhere near great... I probably need to sand some parts after I filled and sand the spots between wing and body.
The fit of the canopy is sadly nowhere near great... I probably need to sand some parts after I filled and sand the spots between wing and body.
11 October 2015, 08:11
Nils Steyaert
following 🙂
looks great, ive been looking to start on this kit myself.
following 🙂
looks great, ive been looking to start on this kit myself.
11 October 2015, 08:55
Soeren R.
First layer of primer down.
Next step is now to fix some gaps etc. and then prime this spots again.
First layer of primer down.
Next step is now to fix some gaps etc. and then prime this spots again.
11 October 2015, 15:40
Christian Meyerhoff
This one will come out very nice! As I always had a week spot for Huma kits, this one is no exception. Keep on like this!
This one will come out very nice! As I always had a week spot for Huma kits, this one is no exception. Keep on like this!
11 October 2015, 17:09
Christian Bruer
The fuselage looks a little bit like a Vampire. Nice and sharp work Soeren!
The fuselage looks a little bit like a Vampire. Nice and sharp work Soeren!
11 October 2015, 17:44
Soeren R.
The kit got his primer, but still have to fill some little spots and after that comes the paint job 🙂
The kit got his primer, but still have to fill some little spots and after that comes the paint job 🙂
24 January 2016, 11:34
Burkhard D
I notice you are switching from rampant buyer into rampant builder mode 😄 👍👍👍
I notice you are switching from rampant buyer into rampant builder mode 😄 👍👍👍
24 January 2016, 13:05
Soeren R.
Haha 🙂 Yeah, if I want to build my stash in my life time. Ive to start somewhere. 😄
Haha 🙂 Yeah, if I want to build my stash in my life time. Ive to start somewhere. 😄
24 January 2016, 13:25
Soeren R.
Its a nice little kit.
Of course it has some flaws, but nothing serious 🙂
Its a nice little kit.
Of course it has some flaws, but nothing serious 🙂
24 January 2016, 20:58
Soeren R.
Bottom color down and the pre-shading is still a little bit visible.
I think that should do it 🙂
Bottom color down and the pre-shading is still a little bit visible.
I think that should do it 🙂
25 January 2016, 16:49
Soeren R.
FIrst top color down.
Next step is now to mask it for the second color.
FIrst top color down.
Next step is now to mask it for the second color.
1 February 2016, 19:16
Soeren R.
Thx a lot Hanno 🙂
I hope the shades will be still visible after I sprayed the brown parts, but I think I will re-spray them before I paint the spots brown. 🙂
Thx a lot Hanno 🙂
I hope the shades will be still visible after I sprayed the brown parts, but I think I will re-spray them before I paint the spots brown. 🙂
1 February 2016, 19:42
Soeren R.
Thx a lot Cristian. 🙂
I hope it will look still good, after the brown was painted.
Thx a lot Cristian. 🙂
I hope it will look still good, after the brown was painted.
2 February 2016, 09:36
Martien Lourens
The production also begins to run with you 🙂🙂. Nice little plane, Soeren
The production also begins to run with you 🙂🙂. Nice little plane, Soeren
2 February 2016, 12:57
Soeren R.
Paintjob is done.
Now a coat of clear to prepare the kit for the decals 🙂
Im quite happy with the result so far, even it wasnt the easiest build.
Paintjob is done.
Now a coat of clear to prepare the kit for the decals 🙂
Im quite happy with the result so far, even it wasnt the easiest build.
2 February 2016, 19:09
Christian Meyerhoff
One of the best Huma builds I`ve seen so far! Please use aftermarket decals and not the crude ones that come with the kit. 👍
One of the best Huma builds I`ve seen so far! Please use aftermarket decals and not the crude ones that come with the kit. 👍
2 February 2016, 20:35
Soeren R.
Thank you both 🙂
@Christian
I must have a look , if i find some fitting decals (maybe from by Ho 229 build)
Thank you both 🙂
@Christian
I must have a look , if i find some fitting decals (maybe from by Ho 229 build)
2 February 2016, 21:01
Christian Meyerhoff
It`s Luft `46 so all You need are some "Balkenkreuze" No big thing I think 🙂
It`s Luft `46 so all You need are some "Balkenkreuze" No big thing I think 🙂
2 February 2016, 21:14
Burkhard D
Wouldn't it have been better to paint the vertical tailplanes before assembly?
Wouldn't it have been better to paint the vertical tailplanes before assembly?
3 February 2016, 11:04
Soeren R.
It probably would, but I need some filler between the wing and the tailplane.
And it also worked out this way in the end😉
It probably would, but I need some filler between the wing and the tailplane.
And it also worked out this way in the end😉
3 February 2016, 11:24
Soeren R.
FIrst layer of clear is now sprayed. Next step are the decals, but I still need to look for some better decals than the kit decals - which are crap!
FIrst layer of clear is now sprayed. Next step are the decals, but I still need to look for some better decals than the kit decals - which are crap!
4 February 2016, 05:16
Soeren R.
Thank you Antonio.
Im also happy with the result so far.😉
A few weeks backs, I was considering to throw this kit away.....
Thank you Antonio.
Im also happy with the result so far.😉
A few weeks backs, I was considering to throw this kit away.....
4 February 2016, 05:34
Wim van der Luijt
Looking good! I like Luft'46 stuff a lot, you can do whatever you like. Hope you can source some decent decals for this bird
Looking good! I like Luft'46 stuff a lot, you can do whatever you like. Hope you can source some decent decals for this bird
4 February 2016, 09:07
Soeren R.
Thx Winn😉
I think that Ive found some good ones for that.
Luckily I still have a second sheet for the Ho 229 from Revell and those decals should fit for this kit.
Thx Winn😉
I think that Ive found some good ones for that.
Luckily I still have a second sheet for the Ho 229 from Revell and those decals should fit for this kit.
4 February 2016, 09:21
Soeren R.
Decals are now done. I ordered "Balkenkreuze" from Techmod and used those.
Decals are now done. I ordered "Balkenkreuze" from Techmod and used those.
6 February 2016, 21:10
Christian Meyerhoff
Techmod is always a goog choice when it comes to German markings. I like this stuff!
Techmod is always a goog choice when it comes to German markings. I like this stuff!
6 February 2016, 21:21
Soeren R.
Its still has some flaws but nothing really serious and which will be prevented next time😉
And please excuse the dust, but the Alclad Klear is a bit magnetic or whatever ..... 😛
Its still has some flaws but nothing really serious and which will be prevented next time😉
And please excuse the dust, but the Alclad Klear is a bit magnetic or whatever ..... 😛
7 February 2016, 18:29
Christian Meyerhoff
Well Soeren, as some people may know I`m a big fan of these kits made by HUMA. Your model is one of the best I`ve seen so far! Excellent work! 👍 👍 👍
Well Soeren, as some people may know I`m a big fan of these kits made by HUMA. Your model is one of the best I`ve seen so far! Excellent work! 👍 👍 👍
7 February 2016, 19:14
Soeren R.
Thanks a lot Ulf.
Im happy that I finally finished it, after it was standing over 5 months on the shelf of doom😉
Thanks a lot Ulf.
Im happy that I finally finished it, after it was standing over 5 months on the shelf of doom😉
11 February 2016, 06:48