база данных по моделизму | управление закромами

gmonasterio

Gustavo Monasterio (gmonasterio)

Gee Bee Racer

1
July 5, 2021
These are all the parts of the kit. I have bought it with Engine and propeller already painted. I painted the pilot myself.
2
July 5, 2021
I used a pin vise to drill holes for the wing support cables, which will be placced after assembly and painting.
3
July 5, 2021
I have also drilled the landing gear fairings, to place the underwing support cables.
4
July 5, 2021
This is the engine and propeller that were already painted.
5
July 5, 2021
I also have used the pin vise to drill the fuselage to insert the support cables.
6
July 5, 2021
The interior will not be much visible, but I had to use a styrene sheet to place the aft bulkhead, to cover the hole, and to place a headrest afterwards.
7
July 5, 2021
Fuselage closed. I use CA to fill the gaps, sand it and rescribed the lines.
8
July 5, 2021
Fuselage, wings and landing gear assembled.
9
July 5, 2021
Another angle of the main assembly.
10
July 5, 2021
Parts ready for priming.
11
July 5, 2021
Parts primed with aeronautical zinchromate.
12
July 7, 2021
White paint applied. White touchups will be performed later. Started to isolate the areas in order to apply red paint.
13
July 7, 2021
Started to isolate the white area with Tamiya tape, in order to apply red paint.
14
July 8, 2021
Red paint applied on top.
15
July 8, 2021
Red paint applied on bottom
16
July 8, 2021
Final result with Tamiya tape removed.
17
July 8, 2021
Detail of scratch built cockpit headrest, made of sprue and painted red.
18
July 11, 2021
Decals applied right
19
July 11, 2021
Decals applied left
20
July 19, 2021
Started to install the upper wires, made of nylon and painted white.
21
July 19, 2021
Lower wires, made of nylon and painted black.
22
July 19, 2021
Lower wires, made of nylon and painted black.
23
July 19, 2021
Finished model.
24
July 19, 2021
Finished model.
25
July 19, 2021
Finished model.
26
July 19, 2021
Finished model.

Комментарии

8 5 July 2021, 12:30

Marc Le Bayon
Very nice.
Seen the real in 1995 at La Ferté Hallais in France, near Paris. It a really tiny aircraft...

5 July 2021, 17:08

Robert Podkoński
One of my favourite planes ever 🙂 This kit is a challenge. Following!

5 July 2021, 17:18

Gustavo Monasterio
It really seems like an "egg plane", but it is actually a huge engine in a tiny fuselage. The challenge of this kit is much like the challenge of flying it!

5 July 2021, 17:23

Robert Podkoński
I suppose so, Gustavo 😉 I once had this kit, but after the Dora Wings offering reached the market I gave it to my friend... I am not so brave as you, presumably 😉

5 July 2021, 19:14

Julian Herrero aka Yuri
Following

11 July 2021, 16:44

Dave Flitton
Awesome start!

11 July 2021, 16:49

Robert Podkoński
Good work, Gustavo. Congrats!

19 July 2021, 14:03

Album info

Construction of Testors 1:48 Gee Bee Racer

26 изображения

1:48

Завершённые

1:48 Gee Bee Racer (Testors 913)

Все альбомы

Посмотреть все альбомы »