D9 Doobi from Balaton
![Album image #1 Album image #1](/albums/img/8/1/1/1095811-86785-51-720.jpg)
Came across this one at a modelling fair. Despite the price I had to go for it.
![Album image #2 Album image #2](/albums/img/8/0/9/1095809-86785-35-pristine.jpg)
Now, this is what I got
![Album image #3 Album image #3](/albums/img/8/0/7/1095807-86785-38-720.jpg)
Big chunks of resin, beautifully casted and with a rather simple and logical breakdown.
![Album image #4 Album image #4](/albums/img/8/0/3/1095803-86785-84-720.jpg)
Detail is very crisp with hardly any casting imperfections.
![Album image #5 Album image #5](/albums/img/8/0/6/1095806-86785-16-720.jpg)
To clean the parts was rather easy
![Album image #6 Album image #6](/albums/img/8/0/2/1095802-86785-47-720.jpg)
The interior is fantasy and has almost nothing to do with the real thing. As almost nothing of it will be seen either, this is not a big deal for me.
![Album image #7 Album image #7](/albums/img/8/0/4/1095804-86785-77-720.jpg)
![Album image #8 Album image #8](/albums/img/8/1/0/1095810-86785-93-720.jpg)
Oh, the tracks. I am anxious so see how that will work out...
![Album image #9 Album image #9](/albums/img/8/0/8/1095808-86785-41-720.jpg)
A fret of PE, an acetate sheet for the windows and a colored one to tint them are also included.
![Album image #10 Album image #10](/albums/img/8/0/5/1095805-86785-51-720.jpg)
Now you have the Takom D9 in styrene - but only in conjuction with a 1070. Price is even higher and availability problematic. So, if you do not detest resin, this kit is still up to the task, as I will show you...
![Album image #11 Album image #11](/albums/img/3/2/6/1107326-86785-66-pristine.jpg)
starting with the interior.
![Album image #12 Album image #12](/albums/img/3/2/4/1107324-86785-41-pristine.jpg)
Painting and a bit of weathering
![Album image #13 Album image #13](/albums/img/3/2/5/1107325-86785-46-720.jpg)
![Album image #14 Album image #14](/albums/img/3/2/9/1107329-86785-28-pristine.jpg)
Resin tracks. That sounds like trouble. But not so with this kit.
![Album image #15 Album image #15](/albums/img/3/2/8/1107328-86785-90-720.jpg)
Breakdown is logical, casting perfect, cleaning easy, assembly straightforward.
![Album image #16 Album image #16](/albums/img/3/2/7/1107327-86785-95-720.jpg)
Looks good, doesn´t it?
![Album image #17 Album image #17](/albums/img/5/9/1/1109591-86785-86-pristine.jpg)
I did not like the thin transparent foil for the glas parts Balaton Models provided with the kit. Glued inside they would look too recessed. Glued outside looked ridiculous. My solution: chopping up a CD-cover and sanding the bullet-proof glas pieces into shape.
![Album image #18 Album image #18](/albums/img/5/9/0/1109590-86785-54-pristine.jpg)
some done and inserted
![Album image #19 Album image #19](/albums/img/5/9/3/1109593-86785-45-720.jpg)
![Album image #20 Album image #20](/albums/img/5/9/2/1109592-86785-17-pristine.jpg)
The drivers compartment with some PE parts and DIY handles
![Album image #21 Album image #21](/albums/img/5/9/4/1109594-86785-31-720.jpg)
Now I have to remove them all again, tint them green and color the rims in black to simulate the seals.
![Album image #22 Album image #22](/albums/img/9/5/6/1127956-86785-40-pristine.jpg)
some more detailling done.
![Album image #23 Album image #23](/albums/img/9/5/7/1127957-86785-67-pristine.jpg)
a few PE parts from the kit and some DIY stuff
![Album image #24 Album image #24](/albums/img/9/5/8/1127958-86785-69-pristine.jpg)
![Album image #25 Album image #25](/albums/img/9/5/9/1127959-86785-54-pristine.jpg)
![Album image #26 Album image #26](/albums/img/9/6/0/1127960-86785-40-720.jpg)
![Album image #27 Album image #27](/albums/img/9/6/1/1127961-86785-97-720.jpg)
![Album image #28 Album image #28](/albums/img/9/6/2/1127962-86785-35-720.jpg)
![Album image #29 Album image #29](/albums/img/9/6/3/1127963-86785-74-720.jpg)
![Album image #30 Album image #30](/albums/img/9/6/4/1127964-86785-79-pristine.jpg)
![Album image #31 Album image #31](/albums/img/2/7/9/1342279-86785-82-720.jpg)
Almost a year later this is back on my bench. All windows are tinted with transparent green. The seals are imitated by a black rim around the glass and the frames. A very last one and I am good to finally put some color on that one.
![Album image #32 Album image #32](/albums/img/2/8/1/1342281-86785-96-720.jpg)
Test fit of the drivers compartment reveals a perfect fit.
![Album image #33 Album image #33](/albums/img/2/8/0/1342280-86785-13-720.jpg)
Hydraulics of the rear hook have been further detailed.
![Album image #34 Album image #34](/albums/img/2/8/2/1342282-86785-72-720.jpg)
![Album image #35 Album image #35](/albums/img/2/8/4/1342284-86785-81-720.jpg)
Depicting wear with the hairspray-technique lead to mixed results. No catastrophy as more paint layers will follow.
![Album image #36 Album image #36](/albums/img/7/4/6/1343746-86785-58-720.jpg)
All bits and pieces added to the drivers compartment.
![Album image #37 Album image #37](/albums/img/7/4/3/1343743-86785-84-720.jpg)
Last pics in all its multimedia glory.
![Album image #38 Album image #38](/albums/img/7/4/4/1343744-86785-84-720.jpg)
Finally ready for paint.
![Album image #39 Album image #39](/albums/img/7/4/5/1343745-86785-92-720.jpg)
![Album image #40 Album image #40](/albums/img/1/2/6/1346126-86785-38-720.jpg)
One arm of one of the supports for the actuators broke of and wasn't seen again. So I had to scatch a replacement.
![Album image #41 Album image #41](/albums/img/1/2/5/1346125-86785-49-720.jpg)
Looks good enough for me.
![Album image #42 Album image #42](/albums/img/1/2/8/1346128-86785-45-720.jpg)
![Album image #43 Album image #43](/albums/img/1/3/2/1346132-86785-78-720.jpg)
...the chassis is ready for primer too.
![Album image #44 Album image #44](/albums/img/1/3/0/1346130-86785-76-720.jpg)
With that done, some bits and pieces that fell of during handling reattached and the rest of the hydraulic hoses connected and routed,...
![Album image #45 Album image #45](/albums/img/5/6/9/1346569-86785-80-720.jpg)
And off we go with paints. Gunze Mr. Surfacer 1500 black with 40% Levelling Thinner is the foundation.
![Album image #46 Album image #46](/albums/img/5/7/0/1346570-86785-81-720.jpg)
Base rust tone mixed 1:1 from Tamiya XF10 and 69. Protected by Gloss varnish.
![Album image #47 Album image #47](/albums/img/5/7/1/1346571-86785-53-720.jpg)
Various rust tone with water diluted Life Color paints, then decanted Hairspray.
![Album image #48 Album image #48](/albums/img/5/7/2/1346572-86785-27-720.jpg)
My mix for Caterpillar-Yellow: XF3:X26:H313 16:2:1.
![Album image #49 Album image #49](/albums/img/5/7/3/1346573-86785-62-720.jpg)
As the Israelis add the armored cabin later I suppose that cabin never saw Caterpillar-paint. So I didn't paint it. It will receive Israeli Sand Grey only at a later stage.
Now onto chipping.
Now onto chipping.
![Album image #50 Album image #50](/albums/img/6/3/4/1346634-86785-33-720.jpg)
The result after chipping
![Album image #51 Album image #51](/albums/img/6/3/5/1346635-86785-18-720.jpg)
![Album image #52 Album image #52](/albums/img/6/3/6/1346636-86785-56-720.jpg)
Unfortunately the paint did not stand the vigorous handing in places. Grrr.
![Album image #53 Album image #53](/albums/img/2/7/7/1351277-86785-68-720.jpg)
The stripped area half way repainted (and the back of the blade)
![Album image #54 Album image #54](/albums/img/4/3/6/1355436-86785-26-720.jpg)
![Album image #55 Album image #55](/albums/img/4/3/9/1355439-86785-24-720.jpg)
![Album image #56 Album image #56](/albums/img/0/1/6/1380016-86785-48-720.jpg)
Finally some progress again. After another layer of hairspray israeli sand grey was applied. I used the mix I found at idf-modelling.com with Tamiya XF20, 27, 49 and 57 in equal amounts. Lower parts received a mix with more XF27, highlighting was done with more XF20 in the mix.
Now onto chipping again.
Now onto chipping again.
![Album image #57 Album image #57](/albums/img/3/9/3/1380393-86785-68-720.jpg)
First result after chipping and a motivational dry fit.
![Album image #58 Album image #58](/albums/img/3/9/4/1380394-86785-61-720.jpg)
I mistakenly used a non permanent marker to color the seals of the windows. This resulted in a mess when I chipped the cabin with water and windex. Luckily it didn't ruin everything. Only little hairspray chipping at the cabin. The details will be painted.
![Album image #59 Album image #59](/albums/img/3/9/1/1380391-86785-24-720.jpg)
Some areas turned out well, others less so. I am not happy with the drive train yet. Doesn't look harmonious. I'll have to redo some parts/areas.
![Album image #60 Album image #60](/albums/img/3/9/5/1380395-86785-43-720.jpg)
![Album image #61 Album image #61](/albums/img/3/9/2/1380392-86785-73-720.jpg)
The overall impression is not too bad, but a lot of detail work still lays ahead. Stick with me. I appreciate some company on the way. 🙂
![Album image #62 Album image #62](/albums/img/9/4/8/1383948-86785-41-720.jpg)
Getting through the paint layers with water/Windex and a stiff brush alone did not do the trick at all places. So I used 2000 and 3000 grit sandpaper to go after the look I wanted.
![Album image #63 Album image #63](/albums/img/9/5/0/1383950-86785-85-720.jpg)
Happy how the blade turned out.
![Album image #64 Album image #64](/albums/img/9/5/1/1383951-86785-73-720.jpg)
Drive wheels are ok, the idlers less so. Hope the oils will improve the look.
![Album image #65 Album image #65](/albums/img/9/5/2/1383952-86785-35-720.jpg)
Same here. Oils will have to fix the shortcomings of the techniques applied so far.
![Album image #66 Album image #66](/albums/img/9/4/6/1383946-86785-39-720.jpg)
Pretty happy with the main body though. J
![Album image #67 Album image #67](/albums/img/9/4/7/1383947-86785-90-720.jpg)
That's the look I was after
![Album image #68 Album image #68](/albums/img/9/4/9/1383949-86785-44-720.jpg)
During handling about a dozen details broke of and will have to be reattached.
![Album image #69 Album image #69](/albums/img/3/9/5/1388395-86785-76-720.jpg)
for a little vignette I need some reinforced concrete slabs. That is the mould I build with chicken wire for the steel reinforcements wrapped around the knobs of the Lego bricks.
![Album image #70 Album image #70](/albums/img/3/9/6/1388396-86785-26-720.jpg)
to fashion some reinforced concrete pillars I build that mould with wooden pegs at the ends. Through predrilled holes of the pegs the wire was guided through the mould.
![Album image #71 Album image #71](/albums/img/3/9/7/1388397-86785-46-720.jpg)
![Album image #72 Album image #72](/albums/img/3/9/8/1388398-86785-17-720.jpg)
The result after filling the moulds with plaster of paris. Still has to dry completely before I can break it up.
![Album image #73 Album image #73](/albums/img/7/2/8/1442728-86785-86-720.jpg)
A rough sketch of a little vignette I plan for the D9. I will probably go either for the photographer or the dogs. Haven't made up my mind yet.
![Album image #74 Album image #74](/albums/img/7/2/7/1442727-86785-51-720.jpg)
![Album image #75 Album image #75](/albums/img/6/3/6/1444636-86785-54-720.jpg)
Finished color fading with enamel wash and oils - mainly sand colored ones, only the engine covers received brown-gray.
![Album image #76 Album image #76](/albums/img/6/3/9/1444639-86785-62-720.jpg)
A dozen lights or so were mounted. The kit provides them in opaque resin which I did not like. So I cut squares from a CD-cover, painted them silver first, them camouflage and drilled into some of them little holes from the underside to simulate light bulbs (the ones where I didn't do that were already mounted before I got the idea).
![Album image #77 Album image #77](/albums/img/6/4/0/1444640-86785-10-720.jpg)
Looks like I will be able to attach the tracks without too much slack or too big a gap. For that I had to ignore the instructions and skip two links per side.
![Album image #78 Album image #78](/albums/img/6/3/2/1444632-86785-29-720.jpg)
A few more details added. Some are intentionally left off so far as I will probably break them off anyway while handling this beast.
![Album image #79 Album image #79](/albums/img/6/3/5/1444635-86785-43-720.jpg)
Mounting the blade will be tricky. I sweat to come to that point.
![Album image #80 Album image #80](/albums/img/6/3/8/1444638-86785-33-720.jpg)
Starts looking like a Doobi.
![Album image #81 Album image #81](/albums/img/6/9/5/1444695-86785-83-720.jpg)
![Album image #82 Album image #82](/albums/img/6/7/9/1444679-86785-51-720.jpg)
Doesn't look as if anything major has been done, but everything test fitted only is now glued in place. This was as tricky and fumbly as expected.
![Album image #83 Album image #83](/albums/img/6/8/1/1444681-86785-24-720.jpg)
The ripper with all the added hoses and fittings
![Album image #84 Album image #84](/albums/img/6/8/2/1444682-86785-90-720.jpg)
The main actuators have been left in Caterpillar-yellow to create some visual interest
![Album image #85 Album image #85](/albums/img/6/7/8/1444678-86785-14-720.jpg)
![Album image #86 Album image #86](/albums/img/6/8/0/1444680-86785-66-720.jpg)
![Album image #87 Album image #87](/albums/img/6/8/5/1444685-86785-53-720.jpg)
![Album image #88 Album image #88](/albums/img/6/8/6/1444686-86785-73-720.jpg)
![Album image #89 Album image #89](/albums/img/6/8/9/1444689-86785-84-720.jpg)
![Album image #90 Album image #90](/albums/img/6/8/8/1444688-86785-14-720.jpg)
Two handles and two mirrors have to be attached and the code number painted. Apart from that, I call this one done. Now let's give him a decent vignette.
![Album image #91 Album image #91](/albums/img/6/9/3/1444693-86785-88-720.jpg)
![Album image #92 Album image #92](/albums/img/6/9/2/1444692-86785-88-720.jpg)
![Album image #93 Album image #93](/albums/img/7/0/0/1444700-86785-93-720.jpg)
![Album image #94 Album image #94](/albums/img/6/9/4/1444694-86785-16-720.jpg)
![Album image #95 Album image #95](/albums/img/6/9/8/1444698-86785-21-720.jpg)
![Album image #96 Album image #96](/albums/img/6/9/9/1444699-86785-19-720.jpg)
![Album image #97 Album image #97](/albums/img/7/3/8/1445738-86785-40-720.jpg)
Some progress on the base. A cardboard frame was build and varnished and a little street corner created.
![Album image #98 Album image #98](/albums/img/0/0/5/1446005-86785-53-720.jpg)
Continued with the base. I was too slow so the plaster of Paris set before I applied the rubble.
![Album image #99 Album image #99](/albums/img/0/1/6/1446016-86785-91-720.jpg)
I had to switch then to Elmer's glue - thick for the big pieces and sprayed on diluted for the smaller stuff. Let's see how much stays in place once everything is dry and I turn the base upside down.
![Album image #100 Album image #100](/albums/img/0/1/7/1446017-86785-33-720.jpg)
A bit of debris was added. A broken photo etched plastic crate, broken window frames, a metal beam and quite a few wires to represent corrugated metal.
![Album image #101 Album image #101](/albums/img/0/1/8/1446018-86785-19-720.jpg)
Befor all of this a little street corner was created. As you see: you hardly see anything anymore.
![Album image #102 Album image #102](/albums/img/0/1/9/1446019-86785-51-720.jpg)
Time to add the last bits and pieces to the Doobi and then to blend it into the base with some pigments.
![Album image #103 Album image #103](/albums/img/0/2/0/1446020-86785-27-720.jpg)
![Album image #104 Album image #104](/albums/img/0/2/1/1446021-86785-37-720.jpg)
![Album image #105 Album image #105](/albums/img/0/2/2/1446022-86785-12-720.jpg)
![Album image #106 Album image #106](/albums/img/0/2/3/1446023-86785-61-720.jpg)
![Album image #107 Album image #107](/albums/img/0/2/4/1446024-86785-83-720.jpg)
![Album image #108 Album image #108](/albums/img/0/2/5/1446025-86785-57-720.jpg)
![Album image #109 Album image #109](/albums/img/9/7/8/1446978-86785-52-720.jpg)
I lost the antenna mount. So I had to build it.
![Album image #110 Album image #110](/albums/img/9/7/6/1446976-86785-70-720.jpg)
The antenna itself comes from EMP3D.
![Album image #111 Album image #111](/albums/img/9/7/7/1446977-86785-11-720.jpg)
Here it is installed - together with some last fragile details and some detail paint.
![Album image #112 Album image #112](/albums/img/9/7/9/1446979-86785-27-720.jpg)
Final touch ups.
![Album image #113 Album image #113](/albums/img/6/6/1/1448661-86785-89-720.jpg)
Ready!
![Album image #114 Album image #114](/albums/img/5/5/5/1451555-86785-75-720.jpg)
![Album image #115 Album image #115](/albums/img/5/5/7/1451557-86785-74-720.jpg)
![Album image #116 Album image #116](/albums/img/5/5/8/1451558-86785-17-720.jpg)
![Album image #117 Album image #117](/albums/img/5/5/9/1451559-86785-47-720.jpg)
![Album image #118 Album image #118](/albums/img/5/6/0/1451560-86785-52-720.jpg)
![Album image #119 Album image #119](/albums/img/5/6/1/1451561-86785-97-720.jpg)
![Album image #120 Album image #120](/albums/img/5/6/2/1451562-86785-24-720.jpg)
![Album image #121 Album image #121](/albums/img/5/6/3/1451563-86785-33-720.jpg)
![Album image #122 Album image #122](/albums/img/5/6/4/1451564-86785-71-720.jpg)
![Album image #123 Album image #123](/albums/img/5/6/5/1451565-86785-40-720.jpg)
![Album image #124 Album image #124](/albums/img/5/6/6/1451566-86785-79-720.jpg)
![Album image #125 Album image #125](/albums/img/5/6/7/1451567-86785-98-720.jpg)
![Album image #126 Album image #126](/albums/img/5/6/8/1451568-86785-60-720.jpg)
![Album image #127 Album image #127](/albums/img/5/6/9/1451569-86785-20-720.jpg)
![Album image #128 Album image #128](/albums/img/5/7/0/1451570-86785-25-720.jpg)
![Album image #129 Album image #129](/albums/img/5/7/1/1451571-86785-28-720.jpg)
![Album image #130 Album image #130](/albums/img/5/7/2/1451572-86785-69-720.jpg)
![Album image #131 Album image #131](/albums/img/5/7/3/1451573-86785-55-720.jpg)
![Album image #132 Album image #132](/albums/img/5/7/4/1451574-86785-21-720.jpg)
![Album image #133 Album image #133](/albums/img/5/7/6/1451576-86785-70-720.jpg)
![Album image #134 Album image #134](/albums/img/5/7/7/1451577-86785-12-720.jpg)
![Album image #135 Album image #135](/albums/img/5/7/8/1451578-86785-10-720.jpg)
Комментарии
60 24 October 2021, 09:09
![](/profiles/img/21096-573-s.jpg)
good call on those windows. they certainly look great being thicker 🙂
7 December 2021, 11:12
![](/profiles/img/33587-335-s.png)
Neat work on cutting those bulletproof windows 👍 Definetly tagging along with this one!
8 December 2021, 13:44
![](/profiles/img/user-s.jpg)
Hi mates! Thanks for your interest. A dio is envisioned but first I have to proceed with the dozer a bit more.
15 December 2021, 23:20
![](/profiles/img/user-s.jpg)
Well, some details are tiny indeed. Welcome Zsolt and MS K to my build.
22 November 2022, 11:48
![](/profiles/img/46361-416-s.jpg)
Brill.Used to work on the real thing so side arms on the outside were nearly all back to bare metal as were the idlers.
22 November 2022, 17:28
![](/profiles/img/user-s.jpg)
Miloss, Christian and Vytautas, thanks for your stopping by and commenting so nicely and the likes.
7 January 2023, 17:38
![](/profiles/img/31078-196-s.jpg)
This is world class! May I ask how you achieved the metallic look on the dozer blade?
13 January 2023, 11:34
![](/profiles/img/user-s.jpg)
Thanks mates for your very encouraging feedback.
@Erik: this is rather simple and straightforward: Alclad Gloss Black Primer, then sanded with 1500, 2000 and 3000 grit to a very smooth finish. Then Alclad Airframe Aluminum which sprays very very fine. Be aware that it is very aggressive too. So apply only very thin coats as thicker ones can dissove the primer again (as I learned the hard way).
13 January 2023, 13:45
![](/profiles/img/31078-196-s.jpg)
Thanks Michael for explaining the process. I thought it was something like that, good to get it confirmed. 👍🏻
13 January 2023, 15:47
![](/profiles/img/81643-264-s.jpg)
Thanks very much for sharing your progress, I'm learning a lot from this! What adhesive do you prefer for joining the resin parts?
7 April 2023, 04:23
![](/profiles/img/33587-335-s.png)
Great layout for the vignette! Those cracked-concrete elements shall make some really interesting base for painting... Looking forward to the result 👍
8 April 2023, 11:46
![](/profiles/img/user-s.jpg)
Thanks mates for sneeking in and leaving a like or a comment. 🙂
@ Dean: for resin parts I use superglue as a standard. Nothing fancy, just a brand name from the DIY-shop. I prefer the very small tubes with only 3ml content. Of the bigger ones I have to throw away too much. For small parts I sometimes use Elmer glue as I have more time to adjust it. Hope that helps.
8 April 2023, 19:50
![](/profiles/img/user-s.jpg)
The D9 is ready. I started it in the fall of 2013. After almost 10 years I can hardly believe I actually finished it.
It saw considerable shelf time, but this was not the kits fault. Balaton Models did a very good job on this one and bottomline it was a joy to build. Detailling and achieving the desired paint effects were the matters that got me bogged down again and again.
I figure will accompany the vignette which is otherwiseready too. As soon as it is done, some more pics will follow.
A swell weekend to all of you.
14 April 2023, 17:45
![](/profiles/img/42719-603-s.jpg)
Excellent work: lay out, detailing, paint work and weathering. Looks like a 1/35 build.
23 April 2023, 08:21
![](/profiles/img/user-s.jpg)
Thanks a lot Neuling. In the end I am really happy how it turned out. With the figure I followed the suggestions of my girlfriend and I think it gives a nice touch to it.
25 April 2023, 06:57