Spraybooth Filter Change
![Album image #1 Album image #1](/albums/img/9/9/2/1167992-31781-94-720.jpg)
No doubt that filter needs changing!
![Album image #2 Album image #2](/albums/img/9/9/4/1167994-31781-13-720.jpg)
Those 2 coats of black on the latest project definitely highlighted how much buildup there is.
![Album image #3 Album image #3](/albums/img/9/9/3/1167993-31781-93-720.jpg)
Once the prefilter is removed the main filter "looks" OK.........
![Album image #4 Album image #4](/albums/img/9/9/5/1167995-31781-79-720.jpg)
But closer inspection reveals it also has a good buildup of paint.
![Album image #5 Album image #5](/albums/img/9/9/8/1167998-31781-62-720.jpg)
Fan looks OK, too
![Album image #6 Album image #6](/albums/img/9/9/9/1167999-31781-45-720.jpg)
But again, closer inspection reveals some buildup.
![Album image #7 Album image #7](/albums/img/0/0/2/1168002-31781-57-720.jpg)
New main filter pad mounted in the frame.
![Album image #8 Album image #8](/albums/img/0/0/0/1168000-31781-33-720.jpg)
This is the roll of prefilter paper I use, Molnlycke E-TORK. This is what the commercial booths use to protect their filters.
![Album image #9 Album image #9](/albums/img/0/0/1/1168001-31781-11-720.jpg)
Held in place top & bottom with masking tape, then tucked down the sides.
![Album image #10 Album image #10](/albums/img/0/0/4/1168004-31781-44-720.jpg)
Ready for use.
![Album image #11 Album image #11](/albums/img/0/0/8/1168008-31781-49-720.jpg)
Back in action!
Комментарии
5 11 February 2022, 16:12
![](/profiles/img/52499-702-s.jpg)
Very cool!
I am not protecting my filter, hoping for better suction. Instead, I bought four replacements and lets see how long they last me.
One thing I also did, was I changed the fan. Got a 4,5k RPM one from amazon and it fits perfectly to screw positions.
Connector is not 1:1 but simple to rework. Loudness roughly the same, but less mist escaping by the sides now.
In case someone wish to replace their fan, 120mm x 120mm x 38mm is the size:
amazon.de/-/en/gp/pr..00?ie=UTF8&psc=1
11 February 2022, 16:32
![](/profiles/img/31781-763-s.jpg)
Hi Sergei, you can see from my "before" pics that even with the prefilter paper AND an extra post-filter, my rig still had plenty of airflow with the standard fan.
This time I omitted the post-filter (it was a sheet of the white foam from the previous blue/white main filter pad), so we'll see how it runs.
Anyway, I don't see any evidence of overspray escaping at the sides but I'll keep in mind your suggestion for a replacement fan. 👍
11 February 2022, 16:38
Album info
Sooner or later the filter sponge becomes too loaded up with paint, so - time to change the filter!
I use a prefilter paper to extend the life of the main filter, Molnlycke E-TORK, this is a similar product to what is used in commercial booths. I change the prefilter when there is visible paint build-up.