Стена
Wall
November 24, 2024
November 5, 2024
November 24, 2024
October 31, 2024
John Hughes
Ooohh, interesting! Wonder who'll get the first kit on the market?
msn.com/en-gb/cars/n..60a0bee6bd&ei=48
msn.com/en-gb/cars/n..60a0bee6bd&ei=48
31 October, 14:56
Kesa Tiho
Knowing how global politics works the U.S will (probably) get it first followed by Germany and so on the list of global superpowers. But depending on when it was announced and when the first commercially available one comes out Russia or North Korea will have made a shitty and cheap copy like the T-14 Armata or any of North Koreas subs (not copies of any western vehicles but you get the point)
Knowing how global politics works the U.S will (probably) get it first followed by Germany and so on the list of global superpowers. But depending on when it was announced and when the first commercially available one comes out Russia or North Korea will have made a shitty and cheap copy like the T-14 Armata or any of North Koreas subs (not copies of any western vehicles but you get the point)
31 October, 15:12
October 28, 2024
October 26, 2024
October 25, 2024
October 14, 2024
October 10, 2024
November 24, 2024
September 30, 2024
September 29, 2024
September 28, 2024
September 24, 2024
John Hughes
добавил новый проект.
добавил новый проект.
24 September, 18:00
Kesa Tiho
If that kit ever finds its way onto your work bench then let me know, ill watch with interest
If that kit ever finds its way onto your work bench then let me know, ill watch with interest
24 September, 21:25
September 13, 2024
August 31, 2024
John Hughes
Be aware that the hull front & sides are made from transparent plastic! Otherwise, a real beauty.
Be aware that the hull front & sides are made from transparent plastic! Otherwise, a real beauty.
1 7 October 2022, 14:17
John van Hooijdonk
Needs Zimmerit anyway, so the clear part is going to be covered......
Needs Zimmerit anyway, so the clear part is going to be covered......
31 August, 08:18
August 27, 2024
John Hughes
добавил новый проект.
добавил новый проект.
5 27 August, 18:32
John Hughes
Hi Robert, I'm hoping to find a second kit so I can make both versions. Having said that, these cars seem to have been continually modified over the years.
Hi Robert, I'm hoping to find a second kit so I can make both versions. Having said that, these cars seem to have been continually modified over the years.
27 August, 19:19
August 25, 2024
John Hughes
Here's a question for you, mates.
What styrene kit would you like to see on the market that has never been done before and what scale?
Here's a shortlist of my thoughts:
1 - 1:350 Gneisenau (Trumpeter announced one a few years back, but it's never materialised)
2 - 1:35 Alvis Stalwart (one of the most iconic post-war British Army vehicles. Amazed it's never been done)
3 - 1:24 Oldsmobile Delta 88 (Ash's car from the Evil Dead franchise)
What's on your would-like-to-see list?
What styrene kit would you like to see on the market that has never been done before and what scale?
Here's a shortlist of my thoughts:
1 - 1:350 Gneisenau (Trumpeter announced one a few years back, but it's never materialised)
2 - 1:35 Alvis Stalwart (one of the most iconic post-war British Army vehicles. Amazed it's never been done)
3 - 1:24 Oldsmobile Delta 88 (Ash's car from the Evil Dead franchise)
What's on your would-like-to-see list?
All comments (14) » 23 August, 14:24
Donald Dickson II
Rolf, yes! I have the resin one in my stash. Would love a proper injection kit in 48.
Rolf, yes! I have the resin one in my stash. Would love a proper injection kit in 48.
24 August, 21:20
John Hughes
1:35 Mk I Churchill (come on AFV Club, you've done just about every other version!)
1:35 Mk I Churchill (come on AFV Club, you've done just about every other version!)
25 August, 10:03
August 17, 2024
August 15, 2024
August 9, 2024
John Hughes
If anyone is looking for inspiration for a build or dio, this might get the juices flowing,
Youtube Video
Youtube Video
All comments (6) » 3 8 August, 10:58
John Hughes
Looks like it's a Sherman. Probably belonged to Telly Savalas to end up looking like that!
Looks like it's a Sherman. Probably belonged to Telly Savalas to end up looking like that!
9 August, 14:22
August 7, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
56 изображения
Modelcraft Centurion III1:35
Well, well, look what's finally hit the doormat! First ordered 27th April, arrived 7th August. It came all the way from ...
Проект: Modelcraft Centurion Mk III
All comments (14) » 22 1 April, 13:02
John Hughes
Hi Gorby. Yes, the tracks were stolen from where they were left. Our usual Evri guy is good, but this was a new one that had only been with them two months. The most annoying part is that it takes 4-6 weeks for a new set to arrive. I'm hoping they will be a good product as they're white metal tracks with brass pins. Should be more durable than the usual resin pins most use.
Hi Gorby. Yes, the tracks were stolen from where they were left. Our usual Evri guy is good, but this was a new one that had only been with them two months. The most annoying part is that it takes 4-6 weeks for a new set to arrive. I'm hoping they will be a good product as they're white metal tracks with brass pins. Should be more durable than the usual resin pins most use.
22 June, 09:08
August 5, 2024
July 28, 2024
July 27, 2024
July 26, 2024
July 23, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
25 изображения
Takom Krupp Raumer S1:35
Phew! That was a long day of painting & it's not quite over yet. However, I'm letting it all dry overnight to give me a ...
Проект: Takom Krupp Raumer S
All comments (8) » 15 2 July, 18:40
gorby
The center hinge thing on the 1/72 model is quite sturdy, but I can see that it might be more of a concern on this big beast.
The center hinge thing on the 1/72 model is quite sturdy, but I can see that it might be more of a concern on this big beast.
20 July, 04:53
July 10, 2024
July 5, 2024
June 30, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
23 27 December 2023, 19:23
Curtis Caden
Lots of interesting tidbits about the "circle". "The circled star having the purpose of avoiding mistakes by Allied airplanes (not by Messerschmitt and Focke Wolf airplanes!) the circle around the small stars on jeeps was more for uniformity than for said purpose, and therefore at times omitted. That is why bigger stars on the sides of bigger vehicles had the circle, be it broken or solid."
I had heard another story where the circles were removed in France by some troops to prevent aerial targeting by the Germans. For me modeling has to be fun more than accurate, for me it is a representation, nothing more. I feel your pain when decals don't go right and sometimes, I have just tried to make the best of the situation, although a part of me wants it like the instructions.
Lots of interesting tidbits about the "circle". "The circled star having the purpose of avoiding mistakes by Allied airplanes (not by Messerschmitt and Focke Wolf airplanes!) the circle around the small stars on jeeps was more for uniformity than for said purpose, and therefore at times omitted. That is why bigger stars on the sides of bigger vehicles had the circle, be it broken or solid."
I had heard another story where the circles were removed in France by some troops to prevent aerial targeting by the Germans. For me modeling has to be fun more than accurate, for me it is a representation, nothing more. I feel your pain when decals don't go right and sometimes, I have just tried to make the best of the situation, although a part of me wants it like the instructions.
23 January, 15:08
John Hughes
Thanks, all. It takes a bit of work due to the age of the kit. I've got the whole set of these old Airfix/Italeri/whoever kits. Most are the Airfix versions, so the moulds would have been fairly new when they were made. The decals might be another matter, however.
Thanks, all. It takes a bit of work due to the age of the kit. I've got the whole set of these old Airfix/Italeri/whoever kits. Most are the Airfix versions, so the moulds would have been fairly new when they were made. The decals might be another matter, however.
23 January, 20:02
June 28, 2024
June 27, 2024
John Hughes
Yet again, on the Android version, clicking on the News Feed link logs me out. No doubt this will magically fix itself within 48 hours.
27 June, 07:02
June 22, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
7 изображения
Italeri BT-51:35
Test fitting the hull top and front. I had to do some work to get the top to sit low enough. I can't progress much furth...
Проект: Italeri BT-5
All comments (6) » 12 1 August 2023, 19:44
Bruce Huxtable
Goodness, soo many problems that Zvesda could have easily avoided. Stars indeed!
Goodness, soo many problems that Zvesda could have easily avoided. Stars indeed!
19 June, 06:54
June 19, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
5 изображения
Soviet Aerosan RF-8/GAZ-981:35
A quick test fit. (No, I hadn't forgotten about this one, it had just got pushed to the back of the bench).
Проект: Trumpeter Aerosan RF-8/GAZ-98
6 6 January, 18:33
John Hughes
There's always a seat reserved for you, Robert, but this time it's up front, unless you want to drive!
There's always a seat reserved for you, Robert, but this time it's up front, unless you want to drive!
6 January, 23:11
June 10, 2024
June 7, 2024
May 29, 2024
May 28, 2024
John Hughes
добавил новый проект.
добавил новый проект.
22 November 2020, 14:32
John Hughes
The spars are moulded into the sails. Useful from an assembly point of view, but a pain for masking!
The spars are moulded into the sails. Useful from an assembly point of view, but a pain for masking!
27 November 2021, 18:56
James Davidson
I did some research with the chinese embassy's help, and some very obscure references. Althought the depiction of the vessel is conjecture, the details of construction remain in expense reports-[various dimensions] so the approximate scale of the kit would be 1/244 or close to that. Best of luck, and the picture is impressive! The only remaining artifact from the actual ships [ther were several built] is a 50 + foot long rudder shaft found in the mud of the drydock that was built for these monsters!
I did some research with the chinese embassy's help, and some very obscure references. Althought the depiction of the vessel is conjecture, the details of construction remain in expense reports-[various dimensions] so the approximate scale of the kit would be 1/244 or close to that. Best of luck, and the picture is impressive! The only remaining artifact from the actual ships [ther were several built] is a 50 + foot long rudder shaft found in the mud of the drydock that was built for these monsters!
5 May, 03:21
John Hughes
I first heard of these ships from reading 1421: The Year China Discovered the World, by Gavin Menzies. There is plenty of info on these vessels in there, although, as you say, there is a lot of conjecture too as all records of the voyages of the ships were destroyed after they returned home and China became isolationist.
I first heard of these ships from reading 1421: The Year China Discovered the World, by Gavin Menzies. There is plenty of info on these vessels in there, although, as you say, there is a lot of conjecture too as all records of the voyages of the ships were destroyed after they returned home and China became isolationist.
5 May, 08:35
James Davidson
Hello Mr. John! just for your information; There is a very good book about the voyages of admiral Zheng, called 'When China ruled the seas" by Louise Levathes- and Captain Menzies wrote a sequel to his- Many people have said that a wooden ship of the described size was not possible [with the methods of the time]- i contend that it WAS, because the size limits of european ships were mostly for military vessels, and Sir Robert Seppings methods set an upper limit to those. The Yankee lumber schooners were enormous, and wooden! If you maintain a box like shape it can be huge, while retaining good structural strength to weight/size ratio. As to Cpt. Menzies ideas of where they went, i think the best argument centers around the time length of the voyages. There are clear dates of departure, arrival at know ports, and returns from same. They just did not have the time/supplies to go futher with their known speed of advance. Again, best of luck with the kit, i have one as well- i am debating replacing the spar/sail combo with scratchbuilt. There are some foil wrap papers that look good at this scale, for the sail cloth.
Hello Mr. John! just for your information; There is a very good book about the voyages of admiral Zheng, called 'When China ruled the seas" by Louise Levathes- and Captain Menzies wrote a sequel to his- Many people have said that a wooden ship of the described size was not possible [with the methods of the time]- i contend that it WAS, because the size limits of european ships were mostly for military vessels, and Sir Robert Seppings methods set an upper limit to those. The Yankee lumber schooners were enormous, and wooden! If you maintain a box like shape it can be huge, while retaining good structural strength to weight/size ratio. As to Cpt. Menzies ideas of where they went, i think the best argument centers around the time length of the voyages. There are clear dates of departure, arrival at know ports, and returns from same. They just did not have the time/supplies to go futher with their known speed of advance. Again, best of luck with the kit, i have one as well- i am debating replacing the spar/sail combo with scratchbuilt. There are some foil wrap papers that look good at this scale, for the sail cloth.
28 May, 20:01
May 27, 2024
May 25, 2024
May 10, 2024
May 8, 2024
April 28, 2024
November 24, 2024
April 26, 2024
April 11, 2024
John Hughes
Added a new review for:
Added a new review for:
German
88mm Gun Flak36 w/6 anti-aircraft artillery crew members (Limited Edition) Border Model 1:35
BT-013 (BT013) 2022 Новая разработка 11 April, 14:47
April 8, 2024
April 3, 2024
John Hughes
Mann's Model Moments put out a review for a surprise Airfix release last Monday (01/04/24)
Youtube Video
Always wanted one of these!
Youtube Video
Always wanted one of these!
2 3 April, 09:21
March 30, 2024
March 28, 2024
March 26, 2024
March 23, 2024
March 22, 2024
John Hughes
добавил новый проект.
добавил новый проект.
2 22 March, 18:43
Robert Podkoński
I have build this model long time ago (in its original, Dragon incarnation) - it is a very modeller-friendly kit imo.
I have build this model long time ago (in its original, Dragon incarnation) - it is a very modeller-friendly kit imo.
22 March, 18:57
John Hughes
Good to know, Robert. That means any problems I encounter will be entirely of my own making.
Good to know, Robert. That means any problems I encounter will be entirely of my own making.
22 March, 20:08
March 16, 2024
March 13, 2024
March 10, 2024
John Hughes
добавил новый фотоальбом.
добавил новый фотоальбом.
6 изображения
Revell Imperial AT-AT1:53
This kit is supposed to be Easy-Click and precoloured. I'll be using cement and paint, just like a proper modeller. The ...
Проект: Revell AT-AT
1 10 March, 20:16
March 9, 2024
March 8, 2024
March 7, 2024
March 5, 2024
John Hughes
Be warned that the inside dimensions quoted are wrong! I've just bought one for a 162mm base (to fit a quoted 165mm) and it doesn't fit inside by 2-3mm!
Be warned that the inside dimensions quoted are wrong! I've just bought one for a 162mm base (to fit a quoted 165mm) and it doesn't fit inside by 2-3mm!
5 March, 19:48
March 2, 2024
February 19, 2024
February 18, 2024
February 13, 2024
February 7, 2024
February 4, 2024
January 29, 2024
January 28, 2024
January 26, 2024
January 25, 2024
January 13, 2024
January 10, 2024
wnolder.php?lang=ru
2024-01-10 09:25:53
2019-08-29 07:07:59
56165
/ajax/wnolder.php?lang=ru&sd=2024-01-10 09:25:53&md=2019-08-29 07:07:59&filter=&w=56165
todo