40ft Container
Trumpeter | No. 01030 | 1:35
fakty
- značka:
- Trumpeter
- nadpis:
- 40ft Container
- číslo:
- 01030
- mierka:
- 1:35
- typ:
- Podrobnosti sú nastavené
- uvoľnený:
- 2016 Nový nástroj
- Čiarový kód:
- 9580208010304 (EAN)
- obal:
- Pevný box (horný otvárač)
- téma:
- ISO-Container » kontajnery (príslušenstvo)
Obsah škatule
Plastové vtokové potrubie
Rozmery:
390x195x35 mm
(15.4x7.7x1.4 inch)
Váha:
410 g (0.9 lbs)
Boxart navrhol Vincenzo Auletta
Inštrukcie
Stiahnuť ▼ 6238Kb (.pdf)
Marketplace
Internetové obchody
USD 26.62
Skladom »USD 31.79
Skladom »USD 39.99
Skladom »USD 27.08
k dispozícii »€ 22.64
USD 26.30Skladom »€ 25.95
USD 30.15Skladom »Zobraziť všetky ponuky » (12 spolu)
Alternatívne SKU pre Trumpeter 01030:
TRU01030 | TRP1030 | TSM1030 | TRUM01030 | TRU1030 | 9580208010304
Poznámka: Ceny a dostupnosť sú iba orientačné. Skontrolujte tiež, či sa produkt skutočne zhoduje!
Recenzie v krabici
Externé recenzie
Reklama
Preskúmanie florymodels
Komentáre
AndrewG
The instructions for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
The instructions for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
1 27 May 2021, 04:49