newsfeed
babak chalangi
vlastní túto položku
vlastní túto položku
Sidewinder Missile Seeker Cover (6 pcs)
Modeller (Khosravi Modeling Accessories) 1:48
A48024 28 October, 17:59
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
34 snímky
Flash, mould lines, sink marks, ejection pin marks and a little bit of kit thrown in. 1:72
projekt: Foden C-Type Steam Lorry
57 11 October, 15:30
David Taylor
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
11 October, 18:28
Rui S
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
12 October, 01:50
gorby
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
12 October, 06:54
Kesa Tiho
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
13 October, 18:46
gorby
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
14 October, 14:56
Mr D
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
14 October, 17:02
Alec K
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
19 October, 12:14
Mr D
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
19 October, 14:01
gorby
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
19 October, 14:23
David Goodchild
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
22 October, 10:29
Łukasz Gliński
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
22 October, 11:14
gorby
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
22 October, 12:39
Łukasz Gliński
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
22 October, 13:23
David Goodchild
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
22 October, 14:27
Mr D
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
22 October, 15:43
gorby
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
27 October, 11:41
bughunter
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
27 October, 12:01
Alec K
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
27 October, 12:56
Łukasz Gliński
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
27 October, 17:38
Kesa Tiho
I love that Gorby's builds comment section became like a little scalemates get together 😂
I love that Gorby's builds comment section became like a little scalemates get together 😂
27 October, 22:15
gorby
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
28 October, 05:54
Bohrmann
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
28 October, 15:15
gorby
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
28 October, 17:08
Alexander Perov
pridal nový fotoalbum.
pridal nový fotoalbum.
3 24 October, 19:11
Alec K
Outstanding build Alexander! The engine details is amazing. It looks like it's ready to fire up, but not sure it runs on vodka… 😂
Outstanding build Alexander! The engine details is amazing. It looks like it's ready to fire up, but not sure it runs on vodka… 😂
28 October, 12:44
Alexander Perov
thanks Alec K and yes I also think the engine will not want to eat vodka. And it was presented by the governor to war veterans on Victory Day
thanks Alec K and yes I also think the engine will not want to eat vodka. And it was presented by the governor to war veterans on Victory Day
28 October, 17:47
Ctirad B
pridal nový fotoalbum.
pridal nový fotoalbum.
74 14 August, 17:36
Mr D
Nicely done, very unusual scheme, the engine details are nice, looks like a great little kit for the money...lve just started a flying boat, the Beriev be-6
Built it as a boy n re-visiting for nostalgia.
Well done..👍👍
Nicely done, very unusual scheme, the engine details are nice, looks like a great little kit for the money...lve just started a flying boat, the Beriev be-6
Built it as a boy n re-visiting for nostalgia.
Well done..👍👍
14 August, 18:11
Alexander Perov
I wanted to pass by, but you're just a miracle, it's not my thing, but hats off, it's genius.
I wanted to pass by, but you're just a miracle, it's not my thing, but hats off, it's genius.
14 August, 20:00
Thomas Kolb
OMG, all that wiring, however did you make it without losing track? But a very beautiful model it turned out to be, I am super impressed!
OMG, all that wiring, however did you make it without losing track? But a very beautiful model it turned out to be, I am super impressed!
18 August, 07:51
Ctirad B
The wiring was really quite challenging. I used the instructions for the model from Wingnut wings in 1:32 scale as a good wiring diagram. It took me about about a month to stretch all the wires.There were moments when I did not believe that I would finish it. 😉
The wiring was really quite challenging. I used the instructions for the model from Wingnut wings in 1:32 scale as a good wiring diagram. It took me about about a month to stretch all the wires.There were moments when I did not believe that I would finish it. 😉
18 August, 16:11
Ben M
Okay. I thought this was 1:32 when I saw it. Now that I realize it's 1:72 I'm even more amazed.
Okay. I thought this was 1:32 when I saw it. Now that I realize it's 1:72 I'm even more amazed.
18 August, 16:15
Landlubber Mike
Just came across this - amazing work! Did you use the AIMS decals for the white swirls?
Just came across this - amazing work! Did you use the AIMS decals for the white swirls?
28 August, 15:27
Ctirad B
To Mike: I couldn't find decals from AIMS here, so I decided to make an airbrush mask. I used the decal image as a base and redrew the whole thing in Corel. Then I cut them out of paper and tested how they fit on the fuselage. After many adjustments, I had the mask cut out on the plotter. It took a lot of time, but I think the result is not bad. (this mask is now available from MH models)
To Mike: I couldn't find decals from AIMS here, so I decided to make an airbrush mask. I used the decal image as a base and redrew the whole thing in Corel. Then I cut them out of paper and tested how they fit on the fuselage. After many adjustments, I had the mask cut out on the plotter. It took a lot of time, but I think the result is not bad. (this mask is now available from MH models)
29 August, 04:32
Landlubber Mike
Wow, that's even more impressive then! I did see the MH Models masks. I have the AIMS decals, but I like the idea of masking the plane instead - plus, I read somewhere that some of the decals aren't the correct shape so hopefully MH got it right.
Wow, that's even more impressive then! I did see the MH Models masks. I have the AIMS decals, but I like the idea of masking the plane instead - plus, I read somewhere that some of the decals aren't the correct shape so hopefully MH got it right.
29 August, 05:05
Ctirad B
The mask from MH models should be the same one I created and used on my model. I gave them my data for cutting.
The mask from MH models should be the same one I created and used on my model. I gave them my data for cutting.
29 August, 05:43
Bruce Huxtable
Wow! Stunning! Superb work, so many details to enjoy....even the transport cradle.
Wow! Stunning! Superb work, so many details to enjoy....even the transport cradle.
29 August, 06:53
Ronan Donohoe
označil túto položku ako na objednávku
označil túto položku ako na objednávku
B-52 Stratofortress wheels, weighted
Armory 1:72
AW72316 28 October, 17:56
Legendaryl
chce túto položku
chce túto položku
US
M2 Bradley Infantry Fighting Vehicle (with 1x crew figure) Tamiya 1:35
35132 (3632) 1985 Nové diely 28 October, 17:49
Legendaryl
chce túto položku
chce túto položku
Bundeswehr
SPz Marder 1A2 mit Panzerabwehrsystem Milan Tamiya 1:35
35162 (162, MM-162) 1993 Nové diely 28 October, 17:48
Ginge123
chce túto položku
chce túto položku
Patrol Craft Fast (PCF) "The Swift Boat"
Masterpiece Models 1:35
MMVN008 28 October, 17:47
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo