newsfeed

Wim van der Luijt
Wow! that is an epic project, just had a look a your build post.....very nice! There is one 1:48 A7V on the market, but your looks better, much better....

phpshopxml.com/quaki..opItemCode/GAS50116K

[img1]

wilky
Another masterpiece.
There is an A7V in Australia.
We Aussies are good at pinching, I mean acquiring things

gorby
Thanks mates. 🙂
Wim: I wasn't impressed with the Gasoline range either and certainly not impressed with the prices. Mine cost probably 1/3 of what that kit cost and I enormously enjoyed the built – probably more so than any kit I've ever done.

Wilky: At least the Aussies had the sense to save one – I'm glad they did.

wilky
We have the only original 262 also

Rui S
Beautifully amazing 👍
Umbeliveble scratch work.
Not my scale but I'M without words. Incredible

gorby
Thanks Rui. Coming from one of the best armour modellers on here, that means a lot. 🙂

Angel Yovtshev
Amazing, Gorby!
Hat off to you!

gorby
Thanks Angel. 🙂
Not anywhere near your league, just the first steps.😉

Alec K
Holy s#*t Gorby. This is AmazIng! I am about halfway done reading the brexit thread and... the rivets, THE RIVETS!!! Very educational, and definitely very entertaining. Not surprised you left this boring lot for the "others"😉 😄. I am starting a scratchbuilding project myself, but it will be of kinder garden variety compared to your undertaking. Cheers 👍

Nathan Dempsey
Wow, impressive work Gorby. The build log on Brexit is awesome. I'm going to use that rivet idea for sure! Oh and I did get the Kryten reference. I saw an episode filmed!

gorby
Thanks very much mates!😉
The rivets were far from the most enjoyable part of the build but these early tanks would look naked without them. I'll look forward to your scratch-build Alec, no doubt it will be astounding.

Rui S
Thank you for your nice words gorbygould, but I think they're a bit exaggerated. I've still a lot to learn with Mates here, including with you 🙂

gorby
With forums like this, there is always something new to learn - if you want to. 🙂

Rui S
Yes, I agree 🙂 Wise words

Neuling
Impressive work!

gorby
Thanks very much Neuling. 🙂

Scott Dutton
Beautiful work, just finished one in 35th but doesn't compare well done

Bart Goesaert
beautiful work.. only thing that comes to mind is the floating of the tank on the barbwire... but very, very nice build and groundwork...

Tim Heimer
Nice work!

gorby
Thanks very much mates. 🙂
Scott: I was well impressed with your build and I referred to your photos to help with mine, so thanks.
Bart: Yes that bugs me as well. I did put a load of lead inside the tank, but it isn't heavy enough to weigh it down sufficiently. I'm going with the experimental super extra heavy-duty barbed wire excuse.😉

Bart Goesaert
add some treeroot underneeth?

gorby
Good idea.

Scott Dutton
If need any more photos let me know, colleague just sent some from his museum visit of the original wh9ch he is happy I can pass on

gorby
Thanks for the offer Scott but I've mentally moved on to my new project. 🙂
My workroom needs to be stripped and rebuild before that can start though. 🙁

bughunter
Tanks are not my metier, but this 100% scratched model is really impressive 😳 Very nice ideas in build report, and even the tracks are scratched 👍

gorby
Thanks very much Frank, your praise has made my day! 🙂
Up until this, tanks were of little interest to me, but I thoroughly enjoyed this build, probably more than any model I've ever done. It kept my brain working right to the end. I'm not saying that there will be no more aircraft from me, but there will certainly be more AFV in my near future. 👍

Jean-Michel Tilquin
Wow! I missed this one, but the view from the trend is impressive, so real!

gorby
Thanks very much Jean-Michel. I'm glad you like it. 🙂

Spanjaard
What a great job!!!! I knew I was missing some great builds in those months that I was out of SCM

Spanjaard
Superb job mate

gorby
Thanks very much Spanjaard!

Dale Marston
Very Nice.

gorby
Thanks Dale 👍

CaptGPF
Wow! The only thing that is missing are terrified soldiers running for their lives!

Pietro De Angelis
Stunning job, congrats!

gorby
Thanks Capt & Pietro.
I would have loved to add some figures Capt, but certainly at the time this was built there were no WWI British troops available in 1/48.

Bohrmann
Well done! Again, hats off to your scratch building skills Too bad there are no pictures of the building process.

gorby
Thanks Bohrmann. 👍
I did do a full build report...on another site, a site which has now unfortunately died. It was only yesterday I removed the dead link to the report - I don't know if that pushed this post to the top of the feed, I though that just happened when you added more photos.
Thanks all for your comments and likes. 🙂

Kesa Tiho
Breathtaking. Simply breathtaking

gorby
Thanks Kesa. This was my first full scratch build - I only built it because there wasn't many WWI vehicles or tanks in 1/48 at the time. It sort of got me hooked on scratch building. 🙂

Kesa Tiho
Well man good for you. I assume scrach building is pretty hard so you've definitely outdone yourself. And with all the small details i assume you've got a pretty steady hand for a man your age (no offence ofcourse)

gorby
It's easier that you think Kesa, although it probably best if you start with adding small bits on kits.

Guy Rump
Excellent job! congrats! 👍

Jan Peters
That is a real fine job! 👍🏻👍🏻

gorby
Thanks mates. 👍

Mark de Boer
Great job, looks amazing.

gorby
Thanks Mark. 🙂

George Trainor
Looks absolutely tremendous

gorby
Thanks George. 👍

Lebloge
Wonderful work !!

gorby
Thanks Lebloge.

Randy Kriegel
Awesome

gorby
Thanks Randy. 👍

Mr James
Beautiful work. That camo paint and the weathering is top notch.

Alex K
Oh my... Here he goes again! 🙂 👍

Daniel Klink
I, I follow.. i follow you, scratched things gorby...👍

René "Lord Bilbo" Bartholemy
I feel an itch for this scratch... Following!

gorby
Glad to have you all along for the ride (not that I'm convinced that this thing would ever have been able to move an inch). 🙂

Łukasz Gliński
Another one, yay! 👍 Welcome to 72!😉

Spanjaard
insane... i would not miss it for the world. scratchbuild to its finest again 🙂

David Taylor
O)h Gawd here we go.

gorby
No pressure then (gulp). 😳
Climb aboard – there's plenty of room inside. 🙂

gorby
The Roller Beast rides again! The next update is available here:
brexitmodeller.com/f..nt&comment=68500

And I'm starting to get the hang of the 'short post' concept.

Alec K
Short posts!?! BORING! I am in, of course 👍

gorby
😄 😄 😄

René "Lord Bilbo" Bartholemy
The result of the rollers is really quite nice. Kudos!

gorby
Thanks for taking the time to comment. 🙂 👍

wilky
Another big oddity

Dave Flitton
Awesome! Another Gorby scratches his What's It

gorby
Thanks for tagging along matiepoos. 👍

Roll up roll up, get your two free posts for the price of one!
I may have failed to understand the economics of why two free items are better than one free item twice. Don't ask such awkward questions!

brexitmodeller.com/f..nt&comment=69094

brexitmodeller.com/f..nt&comment=69631

Alec K
This thing is, well... crazy. Great progress Gorb 👍

gorby
Thanks Alec. 👍
It is slightly reassuring that even I know it's crazy.😉

bughunter
What a crazy tank! This was only existing on paper as drawings I guess? Your scratch work is the opposite 👍

gorby
Yes frank, this thing only existed as a very poorly thought out patent. I've been looking through Google patents and it's amazing how many other misguided monstrosities are buried in there.

bughunter
Oh yes, Google patents is cool! Find also interesting things about our beloved WWI biplanes 👍

gorby
Yet another double trouble update for anyone with the stamina to last the course. Don't worry, not long to go now (just DON'T ask about the dio unless you want to see a grown man cry).

brexitmodeller.com/f..nt&comment=71652

brexitmodeller.com/f..nt&comment=73190

Brandon H
What in tarnation?!
Very cool build

gorby
Thanks Brandon - glad to have you following. 🙂

Rui S
I was following, now I'm in for this crazy patent. Great scracth as always 👍

gorby
Thanks very much Rui mate. 👍
I just wish I could paint and weather as well as you can - that's usually when it goes down-hill for me.😉

Pierre Pierre
that looks very impressive, can you make some size comparison picture of your model ?

gorby
Thanks Pierre.
Good point. I'll sort that for the next update. 👍

Daniel Klink
Why do i think of those guys while watching your progress👍
[img1]

Rui S
Thank you too for that, Gorbygould. Very pleasant to read, but I think your work don't have down-hills, even in painting or weathering.

gorby
Daniel: 😄 😄 😄 What a fabulous contraption - I'm half tempted to build it.

You're too kind Rui, but I know that I'm not good at painting because I don't enjoy it, so I usually rush it to get it over with. I just enjoy putting the bits together – perhaps I'm channelling my inner toddler with the Lego I used to love playing with.😉

David Taylor
Im the same Gorby,prefer the modelling aspect rather than the painting.

Rui S
Well, i've to say that I also, prefer the construction part, even if it's a dio, but without paint it dosen't work. I even avoid painting subassemblies 🤔 but because I like dios, I've to handle figure painting. They are too difficult and take a lot of time, AHRRR 🙁

gorby
Tell me about it – I've just painted 51 1/72 figures for the dio for this monstrosity, although admittedly I stop short of following your lead and didn't paint their nails.😉

Rui S
Did you notice that? 😄
51? Where are you going to locate all that troop?

gorby
Yes I did notice that - you must be bloody mad. 😄
At the moment I have no idea if all 51 are going to fit on the dio - perhaps I need some sort of plan? 😄

gorby
ALL DONE!!!!!
Erm… well, sort of:

brexitmodeller.com/f..nt&comment=74484

gorby
😄 😄 😄

bughunter
What a chunk! I don't want to stand in front of it when it rolls towards me! 😮
With paint it looks scary real 👍

Łukasz Gliński
Bloody ridiculous indeed 👍 Lovely scratchbuilding, I admire it 👍

gorby
Thanks mates. I've still the dio to do - currently about two thirds done. At the moment I'm making hundreds of tiny sandbags - remind me, this is supposed to be fun isn't it?😉

Michael Valentan
And again a real cool project...just getting in now, but what i see is fantastic...i really love your Scratchwork! Which Side is front?? The big roller i think, that would mean the cannons look backwards...absolute crazy!

Hope you build all the other crazy vehicles shown on that site you posted earlier...

Spanjaard
amazing job!! i wonder what will be your next crazy idea... and i will certainly not miss it 🙂

gorby
Thanks very much mates. You will be seeing this monstrosity again when the diorama is complete. 👍
I'm sorry to disappoint you – my next project is to reduce my ludicrously excessive stash of ELEVEN kits! What on earth possessed me to buy so many?😉
Scratching the ridiculously is very addictive, so I'm sure I won't be able to stay away for long.

Michael: Yes the giant roller is at the front. It does take some brain readjustment to understand why ALL the main guns are pointing towards their own troops. What was Jehlik thinking! 😄

Alex Rodionov
Wow. It's fantastic. Nice weathering.

Torsten
Absolutely😎, awesome build

Michael Valentan
Only 11 kits in stock?? Oh my god, that explains why you do that much scratching...i have 10 times of you in stock and always find something to build...from scratch...and every time i made a scratchmodel it comes out as a plastic-kit from a large manufacturer in the next year...last thing to build was a "Boarhound"...should be on display in Vienna in last June (GO Modelling)....will sadly never happen again due to Corona and austrian officials....

And i still wonder if the tank of jehlik was for America in the first line or for export to some "not so heroic" country...to shoot at fleeing soldiers was very popular in former times...

Daniel Klink
Whoaa!!! Very cool and with paint and weathering absolutely stunning !!!

Alec K
Really looking great Gorb. Very addicting indeed, for all of us hooked on your journeys. Looking forward to the dio 👍

Daniel Klink
That would be an absolute unique and spectacular Robo Vac

gorby
😄 😄 😄 – Oh yeh! Robo vac with attitude. 😄

Thanks very much matiepoos I'm pleased it meets with your approval. Not sure about the weathering myself, I sort of closed my eyes and threw mud at it.

Yes 11 kits Michael – but they seem to be 11 eternal kits. It seems that even if I build a kit, I count the stash afterwards and it's STILL 11 bloody kits – how does that happen? I even took one shoe and sock off last time I counted them.😉

Annnyyyway – more bloody sandbags to make. 🙁

Rui S
Very Nice paintjob.👍 Looking forward to see this Monster in a dio😎

gorby
Thanks very much matie. 🙂 👍

gorby
Good grief, won't I ever go away?*
It's Roller-Beast dio time:

brexitmodeller.com/f..-again-its-dio-time/

(* Probably not. You could try ignoring me, although I'm likely to be like an annoying puppy, constantly yapping, yap yap yap until you look. I'll probably just pee on your leg for ignoring me in the first place).

Rui S
Hahaha ok. I do not ignore you, and surely don't mind look at your work 👍. Don't quite understand, why you didn't paint their nails, hehehe.😄 Looking forward to see the dio here😎

gorby
Of course I painted the fingernails Rui, you're just not looking closely enough.😉
I stopped short of painting the whites of their eyes because people start shooting when they see the whites of their eyes and that seems downright antisocial to me.

gorby
The end is nigh!!! The final diorama update!
(There's a few more updates as well, so you might need to get yourself a drink and a couple of tranquillisers and settle in for the evening).

brexitmodeller.com/f..mments#comment-75938

Rui S
What a great work. The dio also turn out Great. Impressive work on this small scale. Very well done Mate 👍

Łukasz Gliński
Wow, pic #23 looks like a real thing, oh wait..😉 👍
Nice wire, how did you get it? OK, found the instructions in the provided forum topic, cool idea 👍

Brandon H
Awesome dio!

jhull123
Another gift! Unstoppable!!

gorby
Thanks very much mates. 🙂
I'll try and get the final photos sorted out in the next week or so. 👍

Spanjaard
impressive!!!

Alec K
Man, that dio will give that monstrosity an undeserved air of legitimacy....😄 😄 😄

gorby
Thanks Spanjaard & Alec.
😄 😄 😄
It's almost as if you think Jehlik wasn't a genius! 😮
(exit stage left, shaking head with dismay, sobbing gently.) 😭

Torsten
Awesome😎

Lochsa River
Outrageous...

gorby
Thanks mates. 🙂

Michael Valentan
That´s a hell of a road roller...it even makes it´s own road...really imperssive, great dio!

gorby
😄 😄
Thanks Michael. 👍

Simon Nagorsnik
thats a crazy project 😃- fantstic idea- like it!

gorby
Thanks very much Simon. 🙂
You've probably realised that I like weird stuff. 😄

Mark
Wow!

Guy Rump
Outrageously brilliant! 👍

Simon Nagorsnik
@gorby: it´s always a good thing to create models/ topics away from the mainstream, i just have to finish some of my old projects, then I will certainly do something similar! 😁
#watching for input 😉

Robin (WhiteGlint)
This is just crazy and cool! 👍

gorby
Thanks everyone for your comments. 🙂
Simon: I would certainly recommend it, I very much enjoyed this project.

Behemonth Magnus
simply....stunning!!

gorby
Thank you very much. 🙂

Michael Kohl
Oh boy! I thought you just took a lint roller and painted it green, but you were really serious about that one. Still haven't made up my mind what's more incredible: the build or the story you fabricated. Be it as it may, I enjoyed both a lot.

gorby
Thanks Michael.
I still can't believe that I spend so much time and effort building something so utterly silly. It's like I've got nothing better to do with my time......oh, apparently I haven't. 😄

Neuling
Looks like my robot vacuum cleaner .......... 🙂

Alexander Grivonev
Hats off to the dedication, most impressive scratch building, simply stellar work! 👍👍

gorby
Perhaps Jehlik had a vision of the future and rather than invent the robotic vacuum he got the scale a bit wrong. 😉
Thanks very much for the comments mates. 👍

Neuling
👍

Pietro De Angelis
Impressive!

Guy Rump
Very nice! 👍

Andy WW1
That's ridiculous! I love it 😄

gorby
Thank you to everyone who has left a nice comment and everyone who has clicked 'like'.
As you're probably bored with seeing this go to the top of the feed, if anyone comments from now on I'll thank you now. 👍

Rui S
Hi Gorby,
It never bothers me to see Great Different Interesting works, that for sure also deserve to be shown and seen by the most recent mates.
One thing his not responding to the new likes, another it's not responding to the deserved Recognition comments. Just my two cent 🤔

Doubtingmango
That is awe inspiring on so many levels

Mick Burdett
A maze ing !!

Finn
Cool!

gorby
Thanks very much for your comments. 🙂

CaptGPF
One question - where's the blood spattering on the roller? 😱. J/K - I love it!

gorby
😄 😄 😄
There isn't any blood because I suspect they'd be able crawl away faster than it would be able to move. 😉

CaptGPF
ROFL!

Andy Dallibar
I feel guilty not putting a like on all your items....take it as a given.

gorby
Thanks Andy, I'm glad you like my stuff. 🙂

nikfrost
A crazy looking thing! Nice work. Some more inspiration for you:

darkroastedblend.com..tory-part-1.html?m=1

Spanjaard
tsar tank has your name all over gorby!!!

gorby
😄 😄 😄
Thanks both and thanks for the link Nik, I have been tempted by a few of those in the past so I'm not ruling anything out. 👍

nikfrost
Tsar tank it is then, hahaha

Kesa Tiho
Oh blimey thats bloody lovely innit mate 🇬🇧🇬🇧🇬🇧☕☕☕🐟🐟🐟

CaptGPF
Gorby, is it me, or is there a severed arm on the roller?!?!

gorby
No it's definitely not you on the roller Capt. 😉
It's supposed to be a barbed-wire post. It's supposed to depict a civilised WWI scene this is, where the neighbours are just popping over with their Fortnum and Mason hamper for a spot of afternoon tea. A severed arm would be most unsporting and really put them off their scones. 🙂
Thanks for your comments mates. 👍

Jay Dubya
In Gorby we trust, to have made this thing completely 'armless!

gorby
😄 😄 😄
Thanks Jay. 🙂

Randy Kriegel
Excellent

gorby
Thanks Randy, I'm glad you like it. 🙂

Sergej I
Wow, nice! In 🙂

Mike Montgomery
Looking great, so far.

CaptGPF
Sitting down for the show!

John
Wow, this scooter turned out really well so far! I am impressed with the kit, decals and the job you have done. 👍

Shar Dipree
Looks fantastic so far.

Sergej I
My, she is durty... quicksearch photo shows it a bit more clean, but it's free art of course 👍
flickr.com/photos/skyhawkpc/50796987381

TV_scalemodels
Sergej I: I didn't find too dirty pictures of this planes either. But I thought this is Marines bird so it can be very dirty 😁 Thanks for commenting!

Mr James
Truly stunning work.. The detail of this kit superb, highlighted by your skill set.

Sergej I
Absolutely gorgeous Skyhawk-transformer 👍!

TV_scalemodels
Thanks for comments! More pictures when the ordinance is on

CaptGPF
Agree with Me >james and company - an absolutely obscene build (in a good way)!

DuperScale
That is one of the best planebuilds i have ever seen. Gratulation to this perfect build.

ALBERTO ITURBURU HERREROS
Great Job 👏👏👏

TV_scalemodels
Thanks you are too kind.! Some more pics later..

Mr James
Great dio. Excellent work on the mud

Rando Dude
Amazing work on the diorama!
Live, laugh, launch :-D

Steven Van Dyck
I never paint the hull parts separately, because they need to get sanded along the seam to get a perfect fit. But it would ease the painting of course.

[img1]

Kesa Tiho
I would do the same thing but i wanted to be cautious and not have to worry about accidentally painting the other side and ruining it. Ill try your way when i buy and build my next model ship and see if its easier. Thanks

Steven Van Dyck
By the way, I also made a Theodore Roosevelt a long time ago.

[img1]

Guy Rump
Following! 👍

Steven Van Dyck
Kesa, if you used the masking tape, how come the black line got like that? I guess the paint crept under the tape, it should be pressed tight to the hull. Can that paint be removed? That is possible with X20a, but you need to repair the grey and red afterward.

Kesa Tiho
I painted the black line without the masking tape first and then painted it again, i would use X-20 but i dont have it, dont have the money for it and i dont know if it works with revell matt black (which i used)

CaptGPF
Rolling - wanna see how this turns out!

Kesa Tiho
Now time to go through the agony of using tamiyas X paints to paint the planes.

Lorraine Lin
Great progress！

Steven Van Dyck
Areas that have to receive a lot of decals should be coated gloss. Like that you can prevent silvering. The decals seem well applied though.

Kesa Tiho
I would apply gloss but sadly i dont have it, i always thought i had to apply decal softener instead. Or should i apply both? Im scared some kind of reaction will happen similar to the reaction with tamiya glue and tamiya paint and with this deck in specific i want it to be matte

Steven Van Dyck
To the contrary, the coat will protect your paint and would even be necessary in case you want to protect the decals with a second layer. Then you would be able to eventually weather the deck with washes, that would be dangerous at this moment because the decals attract fluids if they are not sealed with the coat. Decal softener is useful if the surface is rough or plied like you had on the island with the hull number. It makes the decal soft, but it might not help if you have very matt paint. The matt effect is caused by uneven particles that can harbour microscopic bubbles. The gloss cover will fill the voids and prevent the bubbles. I guess if you use Tamiya that would have its own transparent gloss and matt paint numbers.

CaptGPF
Steven is correct - gloss clear coating is important because it gives you a smoother surface for the decal to adhere to, but also important so you can easily slide the decal around when placing it without running the risk of tearing it.

A general rule of thumb is to run your fingers on the painted surface before you apply any gloss coat, if it is rough, lightly sand the area with a 3000 grit sanding paper to smooth it out. This is important because the gloss clear coat will not give you a smooth finish if applied to a rough surface.

When choosing a gloss clear coat, it is recommended to use a different type of medium vs the panel line washes you plan to use in the end . Example: if you plan to use oil or Tamiya panel line, use acrylic clear coat. If you plan to use water soluble coloring pencils, use a non-acrylic clear coat (like lacquer or enamel). This is so the thinner used to dilute or rub off the washes won't strip the protective clear coat.

When applying decals, some people apply solvaset on the area the decal is to be set, then you roll a cotton bud over it to squeeze out any solution under the decal, before applying microsol. Experiment with a smaller decal that is not so visible, as some decals like Arma and Eduardo's are very thin and can start melting immediately when applied on microset.

Solvaset or Tamiya's Mark fit strong is then applied on the decal to make it conform to the surface. Make sure the decal is placed where you want it before you do this, as it will melt the decal to the kit. Once that is done, apply another layer of gloss clear coat before weathering.

If you use Tamiya X-22, a 50-50 mixture of gloss to thinner may seem too thick, but trust me, it levels out very well.

I apologize for the overly long post, or covering some stuff you already know - just trying to be thorough for anyone new to the hobby.

gorby
Nice work Kesa. It's a lot better than the ships I built when I was your age.

Robert Podkoński
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!

Ben M
🤯

CaptGPF
That PE work is insane! Gotta watch this!

Michael Kohl
Very interesting project

Pietro De Angelis
😲

gorby
Looks very interesting build.

Desert Marlin
Oh, very nice!

Hanno Kleinecke
Hell(cat) yeah ! 👍

Mr D
Wow 😲 brilliant 👌👌👍

John Thomas
Very nice work

Desert Marlin
Okay, that's getting crazy good!

Lorraine Lin
Thank you for the encouragement, will keep on working on this.

Lochsa River
very cool....

Pepe
😳😳😳😍

Neuling
Wow !

David Taylor
Wow.

CaptGPF
Looking more awesome each time I check in on it! Keep up the amazing work!

J35J
Impressive work! Watching with great intrest.

Matt Schloss
That is really cool!

Michael Kohl
Made me look immediately for Jasmodel kits.

Олег О
Это что-то необыкновенное! Потрясающе!

Robert Podkoński
Makes me wonder, what happens next... You've managed this skeleton kit absolutely perfectly. Chapeau bas!

Michael Kohl
How - if all all - did you prep the metal?

tyu
Nice, VERY nice! How did you attach the metal parts: glueing or soldering? Very clean build, impressive1

CaptGPF
Here's a dumb question - how do you keep the paint from chipping off of the PE? I tried spraying Mr Surfacer on it, prior to painting, but it still chips very easily.

Lorraine Lin
Thank you everyone!
@Michael Kohl, this kits are from Jasmine Model. The PEs are great, while the instructions a little bit difficult to understand.
@tyu, I used instant adhesive to glue them together. Some small parts, I used UV glue.
@CaptGPF, I used Mr. Color C series to paint it directly after assembly, keep the paint as thin as possible. But yes, it still chips easily, try not to touch it : )

ZHIDONG Li
大佬

bughunter
Great project!
As I build some Stripdown aircraft already I thought about this one too, but the kit is hard to get here and pricey so it was only an idea.

@CaptGPF You can apply Mr.MetalPrimer from Gunze first. It is a acrylic clear coat which hardens to a thin robust layer even if applied with a brush. I prefer the glass bottle over the rattle can.
SF-242 Mr. Metal Primer, Mr.COLOR , Lacquer, 40ml

Skyhiker
Lorraine what are you using for a skin on the fuselage?

Michael Kohl
I have used Mr Metal Primer for a while too with satisfying results. Paint adheres much better.

Michael Kohl
Copper foil plating and going for a french version. This is getting better every day. 🙂

bughunter
There is a newer version with an additional "-R" on the name, I don't know what was changed. I still use the original one.
Tamiya has also a product for this (have not tried it): 204 Metal Primer, Tamiya Gloss, Enamel, 40ml

Mr D
Now Lorraine....That is dedication to accuracy 😲.
This is why the Chinese were making Ming vases.. while the rest of the world made clay pots 🤣.
Very talented n clever 💯%

Lorraine Lin
Thank you Mates!

@skyhiker, It is 0.02mm cooper foil, and it needs to be annealed first (>650 degree C, a cigar lighter or gas cooker is good enough.)

@Micheal and bughunter, thank you for the suggestion, I just ordered Mr. Metal Primer-R.

Lorraine Lin
Thank you Mr D.

Lorraine Lin
@bughunter, I just received the new "-R" version. The new label says "improved transparency".

Skyhiker
The rivets on the copper look a bit strange because they are not in alignment with the plane's ribs. On a real aircraft wouldn't they be?

Lorraine Lin
@skyhiker, thank you for the comment. This is to verify my idea, I am making a new skin. And will try to make the rivets to align with the ribs. Thank you again.

bughunter
Thank you for the info!
I hope it still sticks to metal like the original.

Mr James
Outstanding work. This goes beyond modelling to precise engineering.

bughunter
Wnat to mention another usage:
The Mr.MetalPrimer can also be used, if the metal should not be painted. It protects the metal surface and prevents tarnishing and oxidation over time.

Alexander Grivonev
Additionally to the metal primer you can treat your PE parts with a fiberglass eraser pen beforehand. It cleans the metal from the oxide layers and roughens it up just a tiny amount to create perfect conditions for paint adhesion.

Dominik Weitzer
Wow. what a great work. excellent!

CaptGPF
Fantastic progress! It's a pity that the beautiful framing is covered up. Did you press the foil against the kit to get the detailing?

Kesa Tiho
Absolutely stunning, alas i cant help but feel suspicious

Alexander Grivonev
What makes you feel suspicious? @Kesa

Kesa Tiho
I cant put my finger on it but it seems too perfect. Too good to be true

Robert Podkoński
If you look closer, you will spot a few imperfections, Kesa (both on the side of the Jasmine model kit, and in the assembly). Notwithstanding, is a fantastic piece of workmanship.

Alexander Grivonev
I agree with Robert, everything looks authentic and not "doctored". I absolutely do not want to take away from Lorraine's craftsmanship, but there is nothing "too good to be true" about this. Great idea, very well executed, just fantastic craftsmanship. Every step is plausible and well documented and I don't even know how or why you would fake something like this 😄

Skyhiker
Well for 300 Euros per kit some people might have to fake it. That's a lot of money.

Alexander Grivonev
but faked HOW is what I wonder about. CGI? Yeah, it looks impressive, but it is still a kit. You cut the parts out, you assemble them and you paint the whole thing, no black magic to it really. It would be much more difficult to "fake" it imho

bughunter
@Skyhiker Do you mean 300€ for the whole project, with the Eduard kits and accesories?
The Jasmine Hellcat can be found from below 130€ from aliexpress (ok tax and co needs to be added) and around 150€ in ebay, but not 300! List price at Jasmin own shop is 169$

CaptGPF
@Kesa - if you think this is too perfect, wait till you see some of the other posters like Neuling, Mr James, Markus and Jörg (to name a few)- their stiff will also blow your mind!!!! However, Lorraine is definitely the God of PE!!!!!

Skyhiker
Bughunter I was looking at the price from Hobby Link Japan.

Kesa Tiho
I think i started a war

Kesa Tiho
@alexander grivionev i would say its just a pre built set but because of the WIP photos i cant :/

Kesa Tiho
I didnt mean my comment as an insult to her and her ability to build, paint etc builds. I just found her build oddly good

Mr D
Kesa, sometimes things can come across wrong way, so it's best to keep comment positive or just hold back... Everyone including yourself has nice experience here.
The site is a community forum and not competition ground.
There are people who are starting out ...brush painting over sticky fingerprint's.
Also there are amazingly talented artists like Lorraine here.
Everybody work n project is important to them, it's the enjoyment of the hobby above all, as you know for the nice work you have created yourself... Hopefully subject will move on now..🤣

Alexander Grivonev
What war mate, we are just having a chat 😄

Alexander Grivonev
Do they come pre built? I don't know..

Lorraine Lin
I believe that the friends in this community enjoy the process of building models, the satisfaction of removing the painting masks, and the interaction and sharing with mates here. Rather than showing off a pre-built model. I joined this community a little over a month ago, and I've seen many excellent works here, learned a lot of building techniques, and most importantly, had the opportunity to communicate with mates from all over the world. I feel connected with everyone, and I will continue to complete this project. Thank you for all your comments and support.

Kesa Tiho
I feel bad now

Lorraine Lin
@CaptGPF, yes, I press the copper foil against the kits to get the shape and details. I don't know "rubbing" is the right word the describe the process. And I plan to cover half of the fuselage. So it is called "cut away": )

Lorraine Lin
@Kesa, Don't be. Following your aircraft carrier project: )

Lorraine Lin
I applied Mr. Metal Primer-R as mates suggested here, it works well. The only thing is the surface is a little bit sticky even after 12 hrs. I guess this is how it prevents the painting from chipping.

Kesa Tiho
@lorraine i can see, i feel honoured to have one of my builds be followed by a skillful builder like you

CaptGPF
@Kesa - I don't think anyone took your post as inflammatory or starting a war - it's nice having conversations like this - and I think it's the best compliment once can receive when someone says "it looks too good". Be yourself!

Augie
Just awesome work.. a stunner!

Greg Baker
Now this is a project. Wow! Great work!

Guy Rump
Looking great, following. 👍

Mr D
Wander if the 🧸 bear gets sticky paws gluing all that PE together .... they make a talented team there pair..🤣
Coming on really well Lorraine.... interesting to see a different technique 🐻✌️

Desert Marlin
Excellent product.

Ben M
Very creative modeling. I enjoy seeing someone build something to this high of a standard as well as trying new things.

Lorraine Lin
Thank you Mates!
@Mr D, haha, actually she is a lovely fox, Lina Bell. My favorite friend in Disney Land 😄 I built a helicopter for her.
[img1]

Mr D
😁 your right a 🦊 fox got the pointy ears..fox's need to get about too 🤣
Really good...👍👍

Robert Podkoński
Looks awesome! Are you going to cover other fragments, Lorraine?

Juergen Klinglhuber
Looking forward to visit "Airpower24" tomorrow. This reminded me that I have taken some pictures the last weeks that did not yet find the way into the album. So here we go.

Juergen Klinglhuber
Little progress on this one.

Guy Rump
Following. 👍

Stefan Fraundorfer
I'm in Jürgen and will follow with interest.

Ekki
And me!

Łukasz Gliński
Joining the party

Juergen Klinglhuber
Hello everyone - thanks for your intereest. I must admit that this is not a very exiting build, but thanks for yor interest - will to the painting this weekend and I just checked the decal sheet,....uuuii, there are plenty tiny stickers to be placed.

Juergen Klinglhuber
thx for your likes mates,..I can report a little progress

George Williams
Looking great so far.

George Williams
Looking great so far.

Bozo
Lovely vintage car. Good modeling and painting. So British