newsfeed
James Hunt
označil túto položku ako na objednávku
označil túto položku ako na objednávku
LB-Works Lamborghini Murcielago Ver. 2 Liberty Walk Series No. 22
Aoshima 1:24
059944 (22) 2024 Nové diely 21 July, 15:29
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
33 snímky
Don’t get the hump - The Bedford Dromedary1:76
I did conciser having a go at hand writing the 2mm high number on the side of the cab…. took me a while to stop laughing...
projekt: Bedford Dromedary.
19 13 July, 13:59
gorby
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorby
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunter
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorby
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
gorby
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
20 July, 14:57
gorby
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
21 July, 06:48
Christian Bruer
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
21 July, 13:54
gorby
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
21 July, 14:00
Jeremy Hartline
vlastní túto položku
vlastní túto položku
2 cm Flakvierling 38 German 2cm FlaK 38 AA Gun with tow trailer
AFV Club 1:35
AF35149 2012 Nové diely Viac tém (2)21 July, 15:27
Petr Kokeš
chce túto položku
chce túto položku
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Nové diely 21 July, 15:27
Moaske
pridal nový fotoalbum.
pridal nový fotoalbum.
29 snímky
Sepecat Jaguar GR1 'Desert Cat'Nový: 21 July, 11:56 1:48
Looking like a tough desert cat
projekt: Sepecat Jaguar GR1 'Desert Cat'
9 14 July, 09:18
Ray Loch
Excellent subject from a not so excellent kit, but then again I haven't attempted my Kittyhawk Jaguar yet. Will be watching this one..
Excellent subject from a not so excellent kit, but then again I haven't attempted my Kittyhawk Jaguar yet. Will be watching this one..
15 July, 13:05
Moaske
The Kittyhawk kit is indeed much better. Enjoy building that one. Also operation Granby scheme?
I'm gonna put mine on hold until these arrive: reskit-models.com/in..49&search=jaguar
The kit nozzles are downright unusable (they don't even fit properly! 😂)
The Kittyhawk kit is indeed much better. Enjoy building that one. Also operation Granby scheme?
I'm gonna put mine on hold until these arrive: reskit-models.com/in..49&search=jaguar
The kit nozzles are downright unusable (they don't even fit properly! 😂)
15 July, 17:57
Ray Loch
Most definitely will be doing the Kittyhawk in a Granby scheme. I might get those nozzles as well.
Most definitely will be doing the Kittyhawk in a Granby scheme. I might get those nozzles as well.
18 July, 02:21
Moaske
Still waiting for the resin nozzles, but otherwise finished... 🙂
Additionally to the aftermarket sets, I've so far scratch built and/or raided from the spares box:
-Intake trunks & turbine fans : 3D printed
-Dorsal and wingtip navigation lights
-Some wiring and extra detailing in the wheel wells
-Canopy lift mechanism and inner frame
-Boundary layer fences: butchered from the overwing pylons
-Pitot tube
-Main gear door pull rods
-Stores stabilizer brackets (are these called this way?) on the free hardpoints
-Got low-vis roundel decals from a Tornado kit
The Heller kit itself is very poor...everything about it, even the decals. I'd say avoid it, unless you want a real challenge :-P
Still waiting for the resin nozzles, but otherwise finished... 🙂
Additionally to the aftermarket sets, I've so far scratch built and/or raided from the spares box:
-Intake trunks & turbine fans : 3D printed
-Dorsal and wingtip navigation lights
-Some wiring and extra detailing in the wheel wells
-Canopy lift mechanism and inner frame
-Boundary layer fences: butchered from the overwing pylons
-Pitot tube
-Main gear door pull rods
-Stores stabilizer brackets (are these called this way?) on the free hardpoints
-Got low-vis roundel decals from a Tornado kit
The Heller kit itself is very poor...everything about it, even the decals. I'd say avoid it, unless you want a real challenge :-P
21 July, 12:32
CaptGPF
Poor kit or not, you certainly brought it to its full potential! Can't wait to see the finished build with the cans. 😀
Poor kit or not, you certainly brought it to its full potential! Can't wait to see the finished build with the cans. 😀
21 July, 15:26
Guy Rump
pridal nový fotoalbum.
pridal nový fotoalbum.
19 28 April, 12:07
Guy Rump
Made a start on the Ki-46. The interior main colour is Ammo-Mig Interior Mitsubishi. 🙂
Welcome Nicolas, pull up a stool. 🙂 👍
Many thanks mate for your interest and like Sukhoi 242. 👍
Made a start on the Ki-46. The interior main colour is Ammo-Mig Interior Mitsubishi. 🙂
Welcome Nicolas, pull up a stool. 🙂 👍
Many thanks mate for your interest and like Sukhoi 242. 👍
15 May, 19:22
Guy Rump
Today I put the wings together and sprayed the parts which will be the undercarriage with Ammo Mig Mitsubishi interior green.
Thanks Jan! 👍
Many thanks mate for your interest and like Patryk S. 👍
Today I put the wings together and sprayed the parts which will be the undercarriage with Ammo Mig Mitsubishi interior green.
Thanks Jan! 👍
Many thanks mate for your interest and like Patryk S. 👍
16 May, 16:00
Guy Rump
Fuselage together and undercarriage area added to wings. 🙂
Many thanks mates for your interest and likes Pietro DA, Villiers DV & 1 other mate. 👍
Fuselage together and undercarriage area added to wings. 🙂
Many thanks mates for your interest and likes Pietro DA, Villiers DV & 1 other mate. 👍
17 May, 16:50
Guy Rump
Fuselage joined to wings and tail plane added. 🙂
Many thanks mates for your interest and likes Matti T, Vincent, scaleffect & 1 other mate. 👍
Fuselage joined to wings and tail plane added. 🙂
Many thanks mates for your interest and likes Matti T, Vincent, scaleffect & 1 other mate. 👍
18 May, 15:57
Guy Rump
Engines now on. Engine covers and masking of canopy next. 🙂
Many thanks mates for your interest and likes J35J, Mojo DV & Franck D. 👍
Engines now on. Engine covers and masking of canopy next. 🙂
Many thanks mates for your interest and likes J35J, Mojo DV & Franck D. 👍
19 May, 16:57
Guy Rump
Vallejo IJA Dark Green added to the top side of the fuselage and wings. 🙂
Many thanks mate for your interest and like Franck G. 👍
Vallejo IJA Dark Green added to the top side of the fuselage and wings. 🙂
Many thanks mate for your interest and like Franck G. 👍
7 July, 16:03
Guy Rump
Gloss varnish applied and Decals added. Wash applied to panels to weather the aircraft. 🙂
Gloss varnish applied and Decals added. Wash applied to panels to weather the aircraft. 🙂
14 July, 16:17
Guy Rump
And finally complete! Thanks mates for your comments & likes. 👍
Many thanks Lost_Erik for your kind comment, I appreciate it greatlt. 👍
Many thanks mates for your interest and likes William J, Lost Erik, Dave F & NordMito. 👍
And finally complete! Thanks mates for your comments & likes. 👍
Many thanks Lost_Erik for your kind comment, I appreciate it greatlt. 👍
Many thanks mates for your interest and likes William J, Lost Erik, Dave F & NordMito. 👍
21 July, 15:23
dawei xu
pridal nový fotoalbum.
pridal nový fotoalbum.
10 21 July, 08:32
CaptGPF
Love how you broke up the sea of white with some light weathering and subtle panel lines. The heat staining on the engines is a nice touch. ❤️❤️❤️
Love how you broke up the sea of white with some light weathering and subtle panel lines. The heat staining on the engines is a nice touch. ❤️❤️❤️
21 July, 15:21
Jan P.
chce túto položku
chce túto položku
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Nové diely 21 July, 15:19
Guy Rump
pridal nový fotoalbum.
pridal nový fotoalbum.
37 18 February, 17:02
Guy Rump
The next project will be this old tool Italeri Horsa glider. My first glider, so here's hoping it will be a good experience. 🙂
The next project will be this old tool Italeri Horsa glider. My first glider, so here's hoping it will be a good experience. 🙂
18 February, 17:05
Guy Rump
Made a start today. First thing to do was decide if a MK.1 or Mk.2 was to be built. I've decided on the Mk.1 so I had to cut out the parts as shown in the photo. 🙂
Welcome along Robert, Nicolas & J35J, nice to have you with me. 👍
Many thanks mates for your interest and likes Robert P, Neil, Chris & J35J. 👍
Made a start today. First thing to do was decide if a MK.1 or Mk.2 was to be built. I've decided on the Mk.1 so I had to cut out the parts as shown in the photo. 🙂
Welcome along Robert, Nicolas & J35J, nice to have you with me. 👍
Many thanks mates for your interest and likes Robert P, Neil, Chris & J35J. 👍
7 March, 16:10
Guy Rump
Seats and flooring now installed inside fuselage. 🙂
Welcome along for the ride Finn. 👍
Many thanks for your interest and like Franck D. 👍
Seats and flooring now installed inside fuselage. 🙂
Welcome along for the ride Finn. 👍
Many thanks for your interest and like Franck D. 👍
17 March, 16:24
Guy Rump
Today I finally completed the cockpit and fitted the cargo door into the fuselage. 🙂
Many thanks mates for your interest and likes Rui, Tim v D, Duster_d & Sukhoi 242. 👍
Today I finally completed the cockpit and fitted the cargo door into the fuselage. 🙂
Many thanks mates for your interest and likes Rui, Tim v D, Duster_d & Sukhoi 242. 👍
23 May, 15:58
Guy Rump
Cockpit, fuselage & tailplane now altogether. Tail was difficult to get together, Added 5g of weight to the nose and 15g of weight to the front of the fuselage. 🙂
Many thanks mate for your interest and like Andrew B. 👍
Cockpit, fuselage & tailplane now altogether. Tail was difficult to get together, Added 5g of weight to the nose and 15g of weight to the front of the fuselage. 🙂
Many thanks mate for your interest and like Andrew B. 👍
24 May, 15:02
Guy Rump
Wings now together. I intend painting the wings before attaching to the fuselage. Hurricane added to show the size of the glider. 🙂
Many thanks mates for your interest and likes Alberto M & airjuneau. 👍
Wings now together. I intend painting the wings before attaching to the fuselage. Hurricane added to show the size of the glider. 🙂
Many thanks mates for your interest and likes Alberto M & airjuneau. 👍
25 May, 15:22
Guy Rump
Did the upperside of the wings with Vallejo Model Air Dark Earth and Dark Green. Invasion stripes to be added next. 🙂
Many thanks mate for your interest and like Pietro DA. 👍
Did the upperside of the wings with Vallejo Model Air Dark Earth and Dark Green. Invasion stripes to be added next. 🙂
Many thanks mate for your interest and like Pietro DA. 👍
27 May, 15:48
Neil Patrick
I built this about 20 years ago Guy as a gift for a WW2 Horsa pilot who was a friend of my wife's family. He'd flown Horsas into Normandy and Arnhem. He loved the model and it sat in his living room for the rest of his days. It's a nice kit as I recall.
I built this about 20 years ago Guy as a gift for a WW2 Horsa pilot who was a friend of my wife's family. He'd flown Horsas into Normandy and Arnhem. He loved the model and it sat in his living room for the rest of his days. It's a nice kit as I recall.
28 May, 10:21
Guy Rump
Invasion stripes are now on the wings. Next is to start painting the invasion stripes on the fuselage. 🙂
@ Neil, it is quite a nice kit considering its age. The fact that you gifted a Horsa model to an actual Horsa pilot veteran is something that must have been hugely gratifying. 👍
Many thanks mates for your interest and likes Villiers DV, Sebastien C, Neil P & 2 other mates. 👍
Invasion stripes are now on the wings. Next is to start painting the invasion stripes on the fuselage. 🙂
@ Neil, it is quite a nice kit considering its age. The fact that you gifted a Horsa model to an actual Horsa pilot veteran is something that must have been hugely gratifying. 👍
Many thanks mates for your interest and likes Villiers DV, Sebastien C, Neil P & 2 other mates. 👍
16 June, 13:55
Guy Rump
Fuselage painted Dark Earth, BS Dark Green and black including invasion stripes. Gap is for where the wings are added. 🙂
Many thanks mate for your interest and like Chris. 👍
Fuselage painted Dark Earth, BS Dark Green and black including invasion stripes. Gap is for where the wings are added. 🙂
Many thanks mate for your interest and like Chris. 👍
23 June, 15:31
Guy Rump
Wings attached, decals & undercarriage added. 🙂
Many thanks mate for your interest and like Dom S. 👍
Wings attached, decals & undercarriage added. 🙂
Many thanks mate for your interest and like Dom S. 👍
30 June, 16:37
Guy Rump
Finally completed, my first glider done. 🙂
Many thanks mates for your interest and likes William J, Mirko R, Cliff K & Finn. 👍
Finally completed, my first glider done. 🙂
Many thanks mates for your interest and likes William J, Mirko R, Cliff K & Finn. 👍
7 July, 15:56
Guy Rump
Many thanks Nicolas & J35J for your kind comments, I really appreciate them! 👍
Many thanks mates for your interest and likes Treehugger, Nicolas, Gary V & Cuajete. 👍
Many thanks Nicolas & J35J for your kind comments, I really appreciate them! 👍
Many thanks mates for your interest and likes Treehugger, Nicolas, Gary V & Cuajete. 👍
14 July, 16:23
Guy Rump
Many thanks for your very kind comments Robert, Stephan & Neuling. I appreciate them greatly! 👍
Many thanks mates for your interest and likes Vassk9, Villiers DV, Mona, Juskifo, NordMito, Stephen F & Mark B. 👍
Many thanks for your very kind comments Robert, Stephan & Neuling. I appreciate them greatly! 👍
Many thanks mates for your interest and likes Vassk9, Villiers DV, Mona, Juskifo, NordMito, Stephen F & Mark B. 👍
21 July, 15:18
Christian Bruer
pridal nový fotoalbum.
pridal nový fotoalbum.
16 snímky
David and Goliath in North AfricaNový: 21 July, 11:28 1:72
projekt: David and Goliath in North Africa
26 7 July, 19:36
Christian Bruer
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
7 July, 19:44
Alec K
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
9 July, 00:05
Christian Bruer
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
10 July, 19:13
Christian Bruer
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
21 July, 11:32
Tom B.
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
21 July, 11:34
Christian Bruer
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
21 July, 14:08
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo