newsfeed
![](/profiles/img/user-s.jpg)
I am very disappointed by this product. Yes it is finer than the kit parts but it is far from clear. The suppose to be transparent areas are almost opaque and show heavy print lines. To achieve an improvement over the kits parts you will need to cut out the frame and put clear foil into it. This will be a major endeavour due the the fragility of the frame.
Not recommended.
![1:35 Unimog S404 cabin side windows (FC Model Trend 37124) 37124](/products/img/5/2/4/1447524-10244-90-t180.jpg)
Unimog S404 cabin side windows
FC Model Trend 1:35
37124 20 August, 07:31
![](/profiles/img/28845-385-s.jpg)
Aha. This type of vehicle was recently included in Squad multiplayer. Typically known as a Bradley, but the M7A3 not having that annoying missile launcher on it.
I hope the tracks, if being track links, are better than with the Bradley kit made by Panda Hobby.
Update: Hrm, nope. Looks like the track links are sort of faked, looking the same as Panda Hobby ones.
20 August, 07:28
![](/profiles/img/user-s.jpg)
Would there be any way of 'subscribing' to a kit/aftermarket/whatever that you have on your wishlist so that if someone flags one as 'for sale' you get a message?
Implementovaná
2 17 January 2023, 17:41
![](/profiles/img/21096-573-s.jpg)
Would be nice that if u have it in wishlist and somebody list is as for sale, you get notified. Maybe possible to choose to get notification or not in preferences (some have pretty large wishlist 😉 )
26 January 2023, 23:22
![](/profiles/img/user-s.jpg)
Agreed - otherwise it could be very spammy. But for ones you're really hunting down it would help!
27 January 2023, 07:42
![](/profiles/img/21096-573-s.jpg)
Most likely it will be notification for all in your wishlist or for nothing, but that will be for our webmaster to say 😉
27 January 2023, 10:04
![](/profiles/img/122007-624-s.png)
+1 for this, as suggested by Spanjaard:
"Would be nice that if u have it in wishlist and somebody list is as for sale, you get notified. Maybe possible to choose to get notification or not in preferences"
27 January 2023, 23:16
![](/profiles/img/user-s.jpg)
A big thanx from me too. You efforts for the continuous improvement of this site with your ears very close to the pack are highly appreciated.
20 August, 07:26
![](/profiles/img/65226-827-s.jpg)
pridal nový fotoalbum.
35 10 August, 21:24
![](/profiles/img/37066-788-s.png)
pridal nový fotoalbum.
73 snímky
[Revell] VW Type 2 (T2) - WIP![View album, image #72 View album, image #72](/albums/img/3/6/8/1789368-37066-90-720.jpg)
1:24
Well. It's done.
projekt: VW Type 2 (T2)
45 13 June, 16:23
![](/profiles/img/49212-838-s.jpg)
I had some adventures in a microbus with some of my cousins back in the early 70's
27 June, 00:20
![](/profiles/img/48725-851-s.jpg)
Sorry to chip in, MS, but this may help you in the future.
When you remove the chrome, there's a residue underneath. That's sometimes, the reason why there's imperfections in the chrome. The residue is some form of clear coat, that's used before the chrome? That can be removed by soaking in brake fluid, for a while. I've had this issue, mainly with Revell chrome, and it doesn't look great. Sometimes, there's a huge blob, and they just chrome over it. Quality control, needs a kick up the butt, at the factory.
Hope this helps you.
14 August, 21:20
![](/profiles/img/48972-166-s.jpg)
I'm a little late, but from now I will be watching this talent show for sure 🙂
16 August, 06:24
![](/profiles/img/67029-507-s.png)
thanks a lot of sharing, now I'm intrigued... what printer do you have you can use a white toner with it???
16 August, 12:12
![](/profiles/img/user-s.jpg)
Liking your 'no problem is insurmountable' attitude, and the results 🙂 Inspiring work for sure 🙂
16 August, 12:22
![](/profiles/img/37066-788-s.png)
@Matteo Pescarin - There are printers that can use white custom toner. However, it is not as opaque as the commercial decals, so it honestly falls below my expectations.
What I use is ghost white toner.
At first, I planned to buy an Alps printer, but I had no choice but to give up because it only supported Windows XP.
16 August, 14:07
![](/profiles/img/21096-573-s.jpg)
I did not know about this ghost white, or is a pitty that just one cartridge seems to be about 300Eur, and if you say that the quality is not good enough......
16 August, 21:07
![](/profiles/img/21997-347-s.jpg)
pridal nový fotoalbum.
56 4 August, 14:43
![](/profiles/img/21997-347-s.jpg)
The weather was ok today to try some outdoor pictures of the finished Pfalz D.III.
The pictures were taken 65 kilometres away from the airfield of the "Bayerische Militärfliegerschule 5" in Gersthofen - the place where the original photo was taken.
4 August, 14:52
![](/profiles/img/28909-839-s.png)
Your biplane shrinking machine is working as well as ever Bugsy. Another one to be proud of.
4 August, 16:39
![](/profiles/img/21997-347-s.jpg)
Thank you very much mates!
Dieter, the pictures are taken outdoor with two tripods.
I just added some pictures made in light tent.
4 August, 20:14
![](/profiles/img/108061-170-s.jpg)
This is a stunner Frank!! A gorgeous airframe and I absolutely love the paint scheme as well. Your typical eye for beautiful detail in all the right spots push this to your usual next level build. It is truly always a pleasure to watch one of your builds
5 August, 10:34
![](/profiles/img/20442-422-s.jpg)
I may not know much about WWI aircraft but I know a beautiful aircraft and model when I see one. Another stunner Frank.
5 August, 10:59
![](/profiles/img/13846-389-s.jpg)
Toll geworden!
Bin auch eine am Bauen, bin aber noch nicht soweit, wie du.
Will mir noch den Motor in 3D erstellen und drucken.
Gruss
5 August, 11:25
![](/profiles/img/69549-161-s.jpg)
Bughunter, that's another great result of your work. Perfectly built model and well presented. Congratulations! 👍👍👍
5 August, 18:08
![](/profiles/img/23186-383-s.jpg)
Beautiful !!! I was following the build with pleasure and the result is amazing 👍
Excellent pictures, as well 👍
11 August, 13:02
![](/profiles/img/21997-347-s.jpg)
Hello mates!
I went on a hiking holiday straight after the release of the final album of this project. That's why I haven't replied here yet. I can make up for that now: many thanks to everyone for the kind words! ❤️️
In case you have not seen it: there is also an Work-In-Progress album attached to the project.
19 August, 15:27
![](/profiles/img/user-s.jpg)
I just love the Pfalz D.III. You built a very beautiful rendition of it.
20 August, 07:22
![](/profiles/img/20442-422-s.jpg)
pridal nový fotoalbum.
19 10 August, 14:12
![](/profiles/img/44957-709-s.jpg)
Another Gorby-licious small-scale "weird" (we wouldn't want you any other way) creation... Definitely in! 👍
10 August, 15:13
![](/profiles/img/20442-422-s.jpg)
Welcome to the show Alex and thanks very much. 🙂
The buildy bit is nearly complete so, as usual I'm playing catch-up with the report. Hopefully another update tomorrow. 🙂
10 August, 16:35
![](/profiles/img/17350-555-s.jpg)
Front row seat, on the bleachers, please Gorby. I wouldn't want to crane my neck to see!
11 August, 01:47
![](/profiles/img/56165-775-s.jpg)
Another build in the series "What's gorby up to now?" Be honest, though. The only reason you didn't have orange flares was that you couldn't get over the fence at the local airfield to steal a couple of windsocks!
11 August, 08:28
![](/profiles/img/144821-523-s.jpg)
I dont understand anything thats going on but i hope your build turns out absolutely stunning
11 August, 08:41
![](/profiles/img/20442-422-s.jpg)
That made me laugh John. 😄
Kesa: I like to buildodd looking vehicles some of which are converted from standard kits. I looooove scratch building.
Thanks both for tagging along. 🙂
11 August, 09:00
![](/profiles/img/144821-523-s.jpg)
Scale models can be converted? So like a F111 model could be fitted with a nuke even though the original model didnt have one?
11 August, 09:03
![](/profiles/img/20442-422-s.jpg)
Definitely Kesa, there is a whole range of aftermarket conversions you can buy or if you are feeling adventurous, some conversions are reasonably easy to scratch build yourself. I have a couple of drawers full of plastic sheet of various thickness and plastic and metal rods, tubes, strips etc. I once saw a fantastic large scale scratch build of a B17 build that used the plastic from yogurt pots as the skin.
11 August, 10:56
![](/profiles/img/20442-422-s.jpg)
Excellent!
I found a link to the B17 I mentioned. It shows what is possible:
forum.largescaleplan..le-b17g-fuddy-duddy/
11 August, 11:28
![](/profiles/img/46361-416-s.jpg)
Hi Gorby.On the real truck there is a winch as a standard fit in the middle.
12 August, 18:27
![](/profiles/img/21096-573-s.jpg)
amazing job my friend. not tobe missed, certainly
thanks for the link to that 1:20 B17, it is out of this world.....
12 August, 19:14
![](/profiles/img/20442-422-s.jpg)
Thanks David, that might have been the reason. 👍
Thanks Spanjaard. That B17 is one of the best scratch-builds I've ever seen - well beyond my ability. I think he sold it to a museum in the US.
13 August, 06:42
![](/profiles/img/20442-422-s.jpg)
New photos start at number 18.
I hope to complete the build today and hopefully take some photos in the next couple of days.
Thanks for tagging along. 👍
14 August, 09:37
![](/profiles/img/46361-416-s.jpg)
Looking at the pic Gorby the driver is reversing the truck back to install the engine.Probably a hand winch with a ratchet.
14 August, 14:39
![](/profiles/img/20442-422-s.jpg)
Thanks mates. 🙂
You could be right David. In the photo the load isn't attached to the crane hook but a hoop on the jib, as you say, probably using a hand winch. I have three photos of the back of various versions of this vehicle and none of them shows anything which might be used to control the crane, so obviously I can't add what I don't see. Thanks for your comment. 👍
15 August, 07:17
![](/profiles/img/20442-422-s.jpg)
Charging ahead with my next build I nearly forgot to post the completed pics of this thing. Hope you like how it's turned out. 🙂
17 August, 13:31
![](/profiles/img/121752-978-s.jpg)
Wow Gorby! Your attention to detail + interesting subject matters are always a joy to watch! I love how you stepped us through the scratch build process and you approach to modeling - very much appreciated!
17 August, 15:36
![](/profiles/img/20442-422-s.jpg)
Wow I'm really taken aback by the response to this one. Lovely comments, thank you all. 🙂
John: My next build is well advanced and hopefully I'll be putting it on here next week. This time it's a full scratchbuild, although not on the scale of my last traction engine. 👍
18 August, 05:55
![](/profiles/img/28909-839-s.png)
Another fine addition to Gorby's house of haunted vehicles. Great job!
18 August, 06:52
![](/profiles/img/20442-422-s.jpg)
😄 😄 😄
That made me laugh Martin. Thanks for your comment. Perhaps 'deranged vehicles' might be more fitting. 😄
18 August, 07:20
![](/profiles/img/21997-347-s.jpg)
You're away for a moment and gorby has already finished a new model - wonderful! I think it's great that you've realised a cover this time!
19 August, 16:51
![](/profiles/img/20442-422-s.jpg)
Thank you very much Frank. I was determined not to chicken out with the cover (I'm told it's called a 'tilt') and quite enjoyed doing it. Always plenty to learn with this modelling lark. 🙂
20 August, 07:18
![](/profiles/img/95920-562-s.jpg)
chce túto položku
![1:72 Panther Pz.Kpfw.V Ausf.G (Vespid Models VS720009) VS720009](/products/img/6/8/2/1382682-10934-18-t180.jpg)
Panther Pz.Kpfw.V Ausf.G (w/ Steel road wheels & AA Armor)
Vespid Models 1:72
VS720009 2021 Nové diely 20 August, 07:16
![](/profiles/img/27147-902-s.jpg)
pridal nový fotoalbum.
28 snímky
Boeing 737-530 Smart Wings 1:144![View album, image #28 View album, image #28](/albums/img/3/9/2/1789392-27147-57-720.jpg)
1:144
Pylon/engine transition painted, wash oil paint on top of wings done, airline name decal placed on fuselage.
29 10 December 2023, 18:22
![](/profiles/img/27147-902-s.jpg)
After a long time I got into modelling and so managed to move a number of things forward. Now I have to let the putty cure properly on the transition between the pylon and the engine. And then the careful sanding and cleaning and final painting of the pylon and engine will begin.
30 June, 19:41
![](/profiles/img/13641-502-s.jpg)
Great to see you back on this one, the livery looks v.cool indeed.
And don't even think that Zvezda nacelles are much better 🙂
30 June, 20:20
![](/profiles/img/21096-573-s.jpg)
wow it it is looking really good. I really like the windows, and the shades you added
30 June, 20:45
![](/profiles/img/27147-902-s.jpg)
Łukasz, I've got 373-800/700 waiting for me from Zvezda. And I'm looking forward to it. However, given my snail's pace, I don't know when their turn will come... 🐌🫣
30 June, 20:50
![](/profiles/img/13641-502-s.jpg)
My both 800s are waiting as well 😄 Revell & Zvezda
Btw. How did you do such a nice pair of landing lights? I'm looking for ideas as decals are not available for all liners in 144th.
30 June, 21:11
![](/profiles/img/user-s.jpg)
I am impressed by how clean and evenly you cut out the windows. Which material did you use to cover the windows before pouring the resin. I use regular Cello tape but the resin dissolves the glue and this sticks to the windows.
30 June, 22:35
![](/profiles/img/27147-902-s.jpg)
@Łukasz - I use either "little lenses" that I bought years ago at www.morellingtool.co.uk or nail glitter that I bought at a bead store.
I seal the headlight area first, then spray paint it matt black and glue the lights (glitter) in the appropriate places.
Then I sealed everything with transparent resin. After the resin hardened, I sanded everything to the shape of the leading edge of the wing and then polished.
1 July, 11:29
![](/profiles/img/27147-902-s.jpg)
@ Michael - I use an electrical tape that I bought on e-bay. I got a reference for it on YouTube here: Youtube Video
It's High Temperature Resistant Kapton Tape. The packaging says it is "Advanced Polymer Tape" and is characterized as "Clean Removal". And the adhesive doesn't really stick to the resin.
![](https://img.youtube.com/vi/muA_ZEMW-HY/maxresdefault.jpg)
1 July, 11:39
![](/profiles/img/user-s.jpg)
Thanks Zbynek. I will try this. The Cello tape glue can be quite easily removed with IPA, but lazy as I am, I like the idea to omit that step.
1 July, 17:31
![](/profiles/img/27147-902-s.jpg)
So I moved forward a bit again and sanded and cleaned up the transition between the pylon and the engine.
4 July, 21:55
![](/profiles/img/27147-902-s.jpg)
In between letting the putty cure in the transition between the pylon and the engine, I started speculating how to improve the cockpit window frame.
In the end, Authentic Airliner Decals were used. I really like the way the authentic metallic finish looks on the decal, plus they depict the rivets and the thin black line showing the insulation between the glass and the frame. I had to cut the decal because the dimensions are a little different on the model, but I really like it. So I ordered another set. The windshield is wider, so one set was not enough for me.
On the photo you can see where the original frame is sprayed with Alclad and where the decal is.
19 July, 17:20
![](/profiles/img/27147-902-s.jpg)
So I found some time for modelling - Pylon/engine transition painted, wash oil paint on top of wings done, airline name decal placed on fuselage.
20 August, 07:16
![](/profiles/img/31903-766-s.jpg)
označil túto položku ako na objednávku
![1:48 AGM-78 Standard ARM with LAU-80 launcher (2 pcs.) (F-105,F-4,A-6,EA-6B) (ResKit RS48-0445) RS48-0445](/products/img/4/0/9/1503409-21997-29-t180.jpg)
AGM-78 Standard ARM with LAU-80 launcher (2 pcs.) (F-105,F-4,A-6,EA-6B) 3D Printing
ResKit 1:48RS48-0445 2023 Nový nástroj
![UA UA](/s/images/flags7/32/UA.png)
20 August, 07:13
![](/profiles/img/31903-766-s.jpg)
označil túto položku ako na objednávku
![1:48 AGM-78 Standard ARM with LAU-80 launcher (2 pcs.) (F-105,F-4,A-6,EA-6B) (ResKit RS48-0445) RS48-0445](/products/img/4/0/9/1503409-21997-29-t180.jpg)
AGM-78 Standard ARM with LAU-80 launcher (2 pcs.) (F-105,F-4,A-6,EA-6B) 3D Printing
ResKit 1:48RS48-0445 2023 Nový nástroj
![UA UA](/s/images/flags7/32/UA.png)
20 August, 07:13
![](/profiles/img/82785-326-s.jpg)
chce túto položku
![1:700 Japanese Seaplane Tender Kimikawa-Maru SD (Aoshima 009710) 009710](/products/img/2/2/4/349224-12522-35-t180.jpg)
Water Line Series Super Detail
Japanese Seaplane Tender Kimikawa-Maru SD w/Wooden Deck Stickers Aoshima 1:700
009710 (00971) 2014 Nový nástroj 20 August, 07:11
![](/profiles/img/31903-766-s.jpg)
označil túto položku ako na objednávku
![1:48 TA-7C, TA-7H, TA-7P, A-7K Corsair II - exhaust nozzle (HobbyBoss) (3D Printed) (ResKit RSU48-0339) RSU48-0339](/products/img/2/3/3/1514233-32441-69-t180.jpg)
TA-7C, TA-7H, TA-7P, A-7K Corsair II - exhaust nozzle (HobbyBoss) (3D Printed)
ResKit 1:48RSU48-0339
![UA UA](/s/images/flags7/32/UA.png)
20 August, 07:11
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo