newsfeed
skyfox22
chce túto položku
chce túto položku
BBMF Collection (Battle of Britain Memorial Flight)
Airfix 1:72
A50158 2014 Modelová sada Viac tém (2)14 October, 13:38
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
47 snímky
YOU CANNOT BE SERIOUS!!! - Un-classic Box ArtTashigrushka – Curtiss P-40 Warhawk (so I’m led to believe) – WHAT THE HELL IS THAT!!!!!
9 12 October, 14:15
Andrzej Rygiel
Nice collection of WTF box arts 🙂. To be fair, majority of them are from the ancient era (60's/70's/80's) of modelling, nobody focused that much on what's on the box back then (but there were also really nice looking artistic pieces from those times that I remember). I'll try to find some newer (90's and onward) box arts that I consider a "failed mission in marketing" - this one is a nice example from 2021 --> Saab TF-35 Draken (Skale Wings SS-72001, 1:72), and this one a bit older (2003), but also has a high WTF factor --> Messerschmitt Bf-109E 3/4 "H..tenkrad (Academy 2214, 1:72).
Nice collection of WTF box arts 🙂. To be fair, majority of them are from the ancient era (60's/70's/80's) of modelling, nobody focused that much on what's on the box back then (but there were also really nice looking artistic pieces from those times that I remember). I'll try to find some newer (90's and onward) box arts that I consider a "failed mission in marketing" - this one is a nice example from 2021 --> Saab TF-35 Draken (Skale Wings SS-72001, 1:72), and this one a bit older (2003), but also has a high WTF factor --> Messerschmitt Bf-109E 3/4 "H..tenkrad (Academy 2214, 1:72).
12 October, 14:56
Robert Podkoński
And the next one to your collection, gorby:
Saunders-Roe SR-53 (URSUS , 1:72)
And the next one to your collection, gorby:
Saunders-Roe SR-53 (URSUS , 1:72)
12 October, 19:52
Ben M
I built that thunderceptor (photo 32) when I was a kid. I got it at a 5 and dime store. I recall I painted it testors metallic gloss red.
I built that thunderceptor (photo 32) when I was a kid. I got it at a 5 and dime store. I recall I painted it testors metallic gloss red.
12 October, 20:57
Robert Podkoński
Aaaaaand my favourite:
PZL P-23 a Karas (RUCH MK006, 1:72)
PZL P-23a (Coopexim , 1:72)
PZL-23A Karaś (RUCH , 1:72)
PZL P.23A Karaś (PZW , 1:72)
which one do you like most? 😄
Don't you dare look at the contents - what's most unbelievable: the same moulds are used now to produce "new" kits:
PZL P-23B Karas (BIGMODEL K72046, 1:72)
Aaaaaand my favourite:
PZL P-23 a Karas (RUCH MK006, 1:72)
PZL P-23a (Coopexim , 1:72)
PZL-23A Karaś (RUCH , 1:72)
PZL P.23A Karaś (PZW , 1:72)
which one do you like most? 😄
Don't you dare look at the contents - what's most unbelievable: the same moulds are used now to produce "new" kits:
PZL P-23B Karas (BIGMODEL K72046, 1:72)
12 October, 21:04
gorby
Thanks for your comments. Some excellent examples Robert, particularly the first three PZL P.23. 😄
Thanks for your comments. Some excellent examples Robert, particularly the first three PZL P.23. 😄
13 October, 07:14
gorby
Yes it bugs me when classic box-art is altered to remove any sign of unpleasantness. This is an ideal example.
Superfortress (Airfix 07001-4, 1:72)
Boeing B-29 Superfortress (Airfix A07001, 1:72)
One is full of action and the other is dull.
Yes it bugs me when classic box-art is altered to remove any sign of unpleasantness. This is an ideal example.
Superfortress (Airfix 07001-4, 1:72)
Boeing B-29 Superfortress (Airfix A07001, 1:72)
One is full of action and the other is dull.
13 October, 13:49
Robert Podkoński
Still, I love the Lindberg's rendering of MiG-19... and Soviet "Warhawk" - quite inspiring, isn't it 😉
Still, I love the Lindberg's rendering of MiG-19... and Soviet "Warhawk" - quite inspiring, isn't it 😉
13 October, 14:06
gorby
The Warhawk is unbelievable! It looks nothing like the real aircraft. I'd love to see the model.
The Warhawk is unbelievable! It looks nothing like the real aircraft. I'd love to see the model.
13 October, 15:25
Mark Sherwood
That Airfix B-29 re-mastered cover art is an affront to the Royal Cross original.
That Airfix B-29 re-mastered cover art is an affront to the Royal Cross original.
13 October, 16:44
gorby
I've just Googled it Ben and it doesn't great, but not as bad as I thought it would. I think I'll save my 15 euro. 😉
I agree Mark (incidentally, the predictive text has change Roy to Royal).
I didn't notice that Martin. 😄
I've just Googled it Ben and it doesn't great, but not as bad as I thought it would. I think I'll save my 15 euro. 😉
I agree Mark (incidentally, the predictive text has change Roy to Royal).
I didn't notice that Martin. 😄
13 October, 17:28
Robert Podkoński
Convair on the picture apparently has no engines, but drop tanks instead 😄 😄 😄t
And here is the next piece of art from Trumpeter:
MiG-15 UTI mixed with Caproni-Stipa by Chinese:
PLA Air Force FT-5 Trainer (Trumpeter 02203, 1:32)
And a few more from Trumpeter:
Chinese Y-5 (Trumpeter 01602, 1:72)
and Airbus Beluga with all-moving tail 😄
A300-600ST Beluga (Trumpeter 00604, 1:144)
and finally, Iliushin Il-28:
Chinese Bomb-5 (Trumpeter 01603, 1:72)
Convair on the picture apparently has no engines, but drop tanks instead 😄 😄 😄t
And here is the next piece of art from Trumpeter:
MiG-15 UTI mixed with Caproni-Stipa by Chinese:
PLA Air Force FT-5 Trainer (Trumpeter 02203, 1:32)
And a few more from Trumpeter:
Chinese Y-5 (Trumpeter 01602, 1:72)
and Airbus Beluga with all-moving tail 😄
A300-600ST Beluga (Trumpeter 00604, 1:144)
and finally, Iliushin Il-28:
Chinese Bomb-5 (Trumpeter 01603, 1:72)
13 October, 19:12
Mark Sherwood
To my previous post, re the B29 box art. It is the inimitable Roy Cross. The reason I bought Airfix. 🤟🥸🤘
To my previous post, re the B29 box art. It is the inimitable Roy Cross. The reason I bought Airfix. 🤟🥸🤘
13 October, 19:12
gorby
Trumpeter have a rich history of dreadful box-art, that Y-5 is particularly painful. 😄
Trumpeter have a rich history of dreadful box-art, that Y-5 is particularly painful. 😄
14 October, 06:41
Treehugger
Oh, wow, what a weird looking Voodoo F-101. Hm, I suppose it might be some prototype jet variant.
Oh, wow, what a weird looking Voodoo F-101. Hm, I suppose it might be some prototype jet variant.
14 October, 08:26
Ludvík Kružík
Very interesting collection of boxart. 👍
There is a reason for the shape of the boxarts made in the Soviet Union. The incompetence of the Soviet industry and the political situation influenced the creation not only of boxarts, but of entire kits produced in the former Soviet Union. Lousy boxarts were defended by claiming that the attractive color pictures on Western boxarts were just capitalist tinsel and bourgeois detailism. And a socialist doesn't need such things.
The model's box was made of poor quality cardboard with mostly two-color printing. From the modest Cyrillic inscription on the box one could read that the box contained a kit of model aircraft number xxxx, or at best, even more accurately, that it was, for example, a fighter aircraft. The instructions for building the model were printed on stiff paper, which could be successfully used as sheet metal. It contained only pictorial instructions for building the model. Any detailed information (colours, camouflage, what kind of machine it was and where it was used...) was missing. In most cases, decals were also missing. In some kits the decals were replaced by stickers. Most of these kits were pressed by the leading company Frog, which was acquired by the Soviets in the second half of the 1970s.
Curiously, the same models, but intended for the Western market, were produced under the NOVO brand. The quality and content of these kits were comparable to the original FROG kits.
Very interesting collection of boxart. 👍
There is a reason for the shape of the boxarts made in the Soviet Union. The incompetence of the Soviet industry and the political situation influenced the creation not only of boxarts, but of entire kits produced in the former Soviet Union. Lousy boxarts were defended by claiming that the attractive color pictures on Western boxarts were just capitalist tinsel and bourgeois detailism. And a socialist doesn't need such things.
The model's box was made of poor quality cardboard with mostly two-color printing. From the modest Cyrillic inscription on the box one could read that the box contained a kit of model aircraft number xxxx, or at best, even more accurately, that it was, for example, a fighter aircraft. The instructions for building the model were printed on stiff paper, which could be successfully used as sheet metal. It contained only pictorial instructions for building the model. Any detailed information (colours, camouflage, what kind of machine it was and where it was used...) was missing. In most cases, decals were also missing. In some kits the decals were replaced by stickers. Most of these kits were pressed by the leading company Frog, which was acquired by the Soviets in the second half of the 1970s.
Curiously, the same models, but intended for the Western market, were produced under the NOVO brand. The quality and content of these kits were comparable to the original FROG kits.
14 October, 12:05
Guy Rump
pridal nový fotoalbum.
pridal nový fotoalbum.
5 8 October, 14:46
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
10 snímky
The Gorby sanctuary resurrection.The extractor is in the corner because of the bulging bit at the back, but it has the added advantage of allowing me to ...
4 7 July 2019, 10:34
gorby
Thanks mate, it's a much nicer place to work so it was worth the effort. It's not so tidy now.
Thanks mate, it's a much nicer place to work so it was worth the effort. It's not so tidy now.
9 August 2019, 16:07
Spanjaard
looking good gorbygould. i have to finish my space now... so i may actually copy some of your ideas!
looking good gorbygould. i have to finish my space now... so i may actually copy some of your ideas!
9 August 2019, 20:26
gorby
Thanks Spanjaard. I'm making minor improvements to the set up as I use the space, but it's much more ergonomically laid out. I also raised the worktop level so that I'm not bending over as much as I used to, and that's much better for my back. Just make sure you have plenty of storage when you do yours. I've filled all the drawers and have still got stuff that needs a home.
The magnetic, under-shelf tool storage works very well so I'd recommend that.
Thanks Spanjaard. I'm making minor improvements to the set up as I use the space, but it's much more ergonomically laid out. I also raised the worktop level so that I'm not bending over as much as I used to, and that's much better for my back. Just make sure you have plenty of storage when you do yours. I've filled all the drawers and have still got stuff that needs a home.
The magnetic, under-shelf tool storage works very well so I'd recommend that.
10 August 2019, 09:06
Gordon Sørensen
Great looking work area, gorby! If only mine was as neat and organized...
Great looking work area, gorby! If only mine was as neat and organized...
10 August 2019, 09:45
gorby
Thanks mates.
That's a good name for the room Urban, although I'm not sure I would be classed as entirely sane.
Gordon: I wish mine was that neat and organised as well! The photos are before any plastic was mangled. I've added another photo on the end to give a more accurate image of what's it's like in use.
Thanks mates.
That's a good name for the room Urban, although I'm not sure I would be classed as entirely sane.
Gordon: I wish mine was that neat and organised as well! The photos are before any plastic was mangled. I've added another photo on the end to give a more accurate image of what's it's like in use.
10 August 2019, 10:24
Urban Gardini
Well, of course you're not able to classify as sane. You're after all a modeller...
Well, of course you're not able to classify as sane. You're after all a modeller...
10 August 2019, 10:45
gorby
😄 (I assume that is supposed to represent laughing – it looks more like constipation to me).
Spanjaard: The ducting was one of my slightly better ideas. It doesn't get rid of the paint smells completely, but it's much better than it was. Incidentally the stuff I used is called 'Kair System 100 Rectangular'. I bought it from a well known South American river😉 and it was quite a reasonable price - £37 all in. The brackets are overpriced but I managed to do it with just one of them.
😄 (I assume that is supposed to represent laughing – it looks more like constipation to me).
Spanjaard: The ducting was one of my slightly better ideas. It doesn't get rid of the paint smells completely, but it's much better than it was. Incidentally the stuff I used is called 'Kair System 100 Rectangular'. I bought it from a well known South American river😉 and it was quite a reasonable price - £37 all in. The brackets are overpriced but I managed to do it with just one of them.
10 August 2019, 11:10
Alec K
Very nice job Gorby, and considering your self-reported aversion to labor a laudable effort indeed. I envy the natural light (my cave is in the basement, so no cigar). Nice work on the tool storage and compressor mounting as well 👍
Very nice job Gorby, and considering your self-reported aversion to labor a laudable effort indeed. I envy the natural light (my cave is in the basement, so no cigar). Nice work on the tool storage and compressor mounting as well 👍
10 August 2019, 12:41
gorby
Thanks Alec. I had hoped those years of manual labour were behind me, it's not good for your health you know. The compressor mounting works well – the rubber shelf mounting and the rubber mat absorb quite a lot of the vibration, so it sounds much quieter.
Thanks Alec. I had hoped those years of manual labour were behind me, it's not good for your health you know. The compressor mounting works well – the rubber shelf mounting and the rubber mat absorb quite a lot of the vibration, so it sounds much quieter.
10 August 2019, 16:27
Spanjaard
i actually have part of the stuff already... i had a couple of tubes leftover from some crazy idea during the renovation of our place... i just need the ends of it, and i have it almost done. well, i need to connect it to the window, but i have an idea about it 🙂
i actually have part of the stuff already... i had a couple of tubes leftover from some crazy idea during the renovation of our place... i just need the ends of it, and i have it almost done. well, i need to connect it to the window, but i have an idea about it 🙂
10 August 2019, 20:45
Kesa Tiho
Wow, cool to see the cave where all the magic happenes. Also interested to see what the mouse looking build on your desk is (you might have posted about it already but i havent checked your profile so gonna go do that now 👍)
Wow, cool to see the cave where all the magic happenes. Also interested to see what the mouse looking build on your desk is (you might have posted about it already but i havent checked your profile so gonna go do that now 👍)
14 October, 13:04
gorby
Thanks all. 🙂
Kesa, that was my SHADO 1 build: Where have all the Aliens gone? Scratching my SHADO. | Album by gorby (1:48)
Thanks all. 🙂
Kesa, that was my SHADO 1 build: Where have all the Aliens gone? Scratching my SHADO. | Album by gorby (1:48)
14 October, 13:31
Steven Van Dyck
pridal nový fotoalbum.
pridal nový fotoalbum.
2 5 October, 10:18
Steven Van Dyck
Thanks. The frame is now assembled after removing of sinkmarks on both beams. These were not present on the four wheel truck frame that is still included. The first set of three SKP lights is added to the rear.
Thanks. The frame is now assembled after removing of sinkmarks on both beams. These were not present on the four wheel truck frame that is still included. The first set of three SKP lights is added to the rear.
14 October, 13:30
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
10 snímky
Let me introduce you to my first and ONLY attempt to model a tank with a full interior.1:48
projekt: Panther A w/Zimmerit & Full Interior
93 23 April 2022, 07:57
Murad ÖZER
gorby you'r a brave one for sure, i wouldn't attempt this in 35th scale let alone 48th. however the end result is beautiful, well worth the trouble me sez! 👍👍👍
gorby you'r a brave one for sure, i wouldn't attempt this in 35th scale let alone 48th. however the end result is beautiful, well worth the trouble me sez! 👍👍👍
23 April 2022, 17:15
gorby
Thanks Murad. I'm not sure about brave. Maybe if I knew what I was taking on. Foolish would be much more appropriate. 🙂
Thanks Murad. I'm not sure about brave. Maybe if I knew what I was taking on. Foolish would be much more appropriate. 🙂
24 April 2022, 13:07
Simon Nagorsnik
Congrats and my respect for this Gorby!
You did an awesome job here👍
Out and inside are just real eycatcher!
I'm amazed😁
Congrats and my respect for this Gorby!
You did an awesome job here👍
Out and inside are just real eycatcher!
I'm amazed😁
22 May 2022, 14:45
gorby
Thanks Rui, John & Simon. 🙂
It really is an excellent kit - but make sure you carefully read the instructions and engage your brain as it's easy to stuff it up.
Thanks Rui, John & Simon. 🙂
It really is an excellent kit - but make sure you carefully read the instructions and engage your brain as it's easy to stuff it up.
22 May 2022, 15:15
Neuling
Gorby: it´s the result and the qualitiy that count, all´s well that ends well! May be your early quick builds were not quite as good as the late ones?
Gorby: it´s the result and the qualitiy that count, all´s well that ends well! May be your early quick builds were not quite as good as the late ones?
24 August 2022, 10:29
gorby
Thanks mates I'm glad you like it.
Neuling: One day I might get to be as good a modeller as you. Obliviously it won't be in this lifetime...perhaps the one after next. 😄
Thanks mates I'm glad you like it.
Neuling: One day I might get to be as good a modeller as you. Obliviously it won't be in this lifetime...perhaps the one after next. 😄
24 August 2022, 16:32
Random Penguin
Nice build, Gorby!
Any problems with zimmerit during priming? Which primer did you use?
Nice build, Gorby!
Any problems with zimmerit during priming? Which primer did you use?
24 August 2022, 20:07
Random Penguin
Oh, man! After seeing all the trouble you had with interior it's cool that you didn't drop the build.
Oh, man! After seeing all the trouble you had with interior it's cool that you didn't drop the build.
24 August 2022, 20:33
gorby
Thanks mates. 👍
Random Penguin: I used a cheap rattle-can plastic primer from Halfords (a car accessories retailer) without any problems at all – other than the Zimm decals are quite brittle.
I never give up on a build – don't think 'cool' think 'unhealthy obsession'. 😉
Thanks mates. 👍
Random Penguin: I used a cheap rattle-can plastic primer from Halfords (a car accessories retailer) without any problems at all – other than the Zimm decals are quite brittle.
I never give up on a build – don't think 'cool' think 'unhealthy obsession'. 😉
25 August 2022, 08:47
Spanjaard
there are much worst obsessions out there, my deal gorby. i think you have a good one 🙂
there are much worst obsessions out there, my deal gorby. i think you have a good one 🙂
25 August 2022, 10:43
Random Penguin
I fixed the zimmerit on my kit by melting it down with plastic glue, so I wasn't sure if it would hold up to a can of primer. But since you say that everything is OK, then I probably will try. It's a pity I don't have much left of zimmerit except for Suyata's logo - there is almost nowhere to check how the chemistry will react with it.
I fixed the zimmerit on my kit by melting it down with plastic glue, so I wasn't sure if it would hold up to a can of primer. But since you say that everything is OK, then I probably will try. It's a pity I don't have much left of zimmerit except for Suyata's logo - there is almost nowhere to check how the chemistry will react with it.
25 August 2022, 16:05
gorby
It didn't occur to me there would be a problem with the primer and fortunately there wasn't. Give it a go and you'll probably find the same.
(PS If it's a disaster, I can delete this comment can't I?) 😄
It didn't occur to me there would be a problem with the primer and fortunately there wasn't. Give it a go and you'll probably find the same.
(PS If it's a disaster, I can delete this comment can't I?) 😄
26 August 2022, 14:27
gorby
I might need to give it some time until the mental scars heal. 😄
I'm more into 1/72 armour now (it's all Zsolt's fault I tell you!) and if anyone suggests building a 1/72 tank with an full interior, I won't be responsible for my actions. 😉
I might need to give it some time until the mental scars heal. 😄
I'm more into 1/72 armour now (it's all Zsolt's fault I tell you!) and if anyone suggests building a 1/72 tank with an full interior, I won't be responsible for my actions. 😉
26 August 2022, 14:46
Bruce Huxtable
Really liking the results, Gorby 🙂 Your notes and comments ring true for soo many of us, I'm sure 🙂 Ah, impetuous youth, where are you now...? Our discerning 'eye' is so much more developed, I'm sure, but the satisfaction of doing a nice job is the same 🙂 (I still kick myself when clumsy fingers break off fragile parts.....)
Really liking the results, Gorby 🙂 Your notes and comments ring true for soo many of us, I'm sure 🙂 Ah, impetuous youth, where are you now...? Our discerning 'eye' is so much more developed, I'm sure, but the satisfaction of doing a nice job is the same 🙂 (I still kick myself when clumsy fingers break off fragile parts.....)
26 August 2022, 15:05
gorby
John: I've concluded that any right-thinking person would agree that a tank model with a full interior is a ludicrous concept at whatever scale – 1/72 & 1/76 scale doubly so. Obviously if you don't agree I'm not going to categorise you as right thinking and therefore can be safely ignored. 😉
Thanks Bruce, I've reached the stage where I know when gluing a fragile part on that it's without doubt going to get broken off at some later point in the build. I find it always helps to have some favourite swear words on hand.
John: I've concluded that any right-thinking person would agree that a tank model with a full interior is a ludicrous concept at whatever scale – 1/72 & 1/76 scale doubly so. Obviously if you don't agree I'm not going to categorise you as right thinking and therefore can be safely ignored. 😉
Thanks Bruce, I've reached the stage where I know when gluing a fragile part on that it's without doubt going to get broken off at some later point in the build. I find it always helps to have some favourite swear words on hand.
26 August 2022, 15:49
gorby
Thanks for your comment Mick, glad you like it.
As to best tank, Al Murray doesn't agree. 😄
Youtube Video
Thanks for your comment Mick, glad you like it.
As to best tank, Al Murray doesn't agree. 😄
Youtube Video
4 September 2023, 16:12
Kesa Tiho
A+ really nice finish. Loooove it. And the riger modelis joke had my laughing so hard i cried 🤣
A+ really nice finish. Loooove it. And the riger modelis joke had my laughing so hard i cried 🤣
6 October, 20:09
Pietro De Angelis
Really impressive Gorby, congrats, and congrats also for the jokes, i can only imagine the patience it took to finish it so well...
Really impressive Gorby, congrats, and congrats also for the jokes, i can only imagine the patience it took to finish it so well...
7 October, 17:19
Bohrmann
Very nicely executed 'effort' as you call it. I think the colour scheme comes out very well with the subtle camouflage patches. You built the model in a 2-month time frame but do you have any idea how many hours you put into it?
Very nicely executed 'effort' as you call it. I think the colour scheme comes out very well with the subtle camouflage patches. You built the model in a 2-month time frame but do you have any idea how many hours you put into it?
8 October, 09:32
gorby
Thanks for taking the time to comment Bohrmann. 🙂
Some days I might have work on it for 3 hours and then it might be half an hour or nothing, so it's difficult to say with any accuracy how many hours it took. I do know that I spent a surprising amount of time cleaning up the parts, there are a lot of ejector pin marks and a significant mould line on many parts.
Having said that it's an amazing kit which really pushed me to the limit of my (limited) skills.
Thanks for taking the time to comment Bohrmann. 🙂
Some days I might have work on it for 3 hours and then it might be half an hour or nothing, so it's difficult to say with any accuracy how many hours it took. I do know that I spent a surprising amount of time cleaning up the parts, there are a lot of ejector pin marks and a significant mould line on many parts.
Having said that it's an amazing kit which really pushed me to the limit of my (limited) skills.
8 October, 10:06
Mr James
Lovely lovely work. I like your camo painting and the interior details are great
Lovely lovely work. I like your camo painting and the interior details are great
13 October, 19:40
Nik Watson
Absolutely superb work, the colour and depth of shading and shadow you've achieved is excellent.
Congratulations on your one and only full interior kit.....go on,you've got to do another.....👏👏👏
Watto. 🍻
Absolutely superb work, the colour and depth of shading and shadow you've achieved is excellent.
Congratulations on your one and only full interior kit.....go on,you've got to do another.....👏👏👏
Watto. 🍻
14 October, 07:36
gorby
Wow thanks Nik, if I did any of that with the painting it was purely accidental. 😄 😄
No further full interior tanks are planned as I still clearly remember the pain.
Wow thanks Nik, if I did any of that with the painting it was purely accidental. 😄 😄
No further full interior tanks are planned as I still clearly remember the pain.
14 October, 07:40
Al Richardson
vlastní túto položku
vlastní túto položku
F-4 Phantom II (long nose versions) Pitot tube for F-4E, F, G, EJ and recce variants RF-4B, C, E, EJ
Master 1:72
AM-72-036 2012 Nový nástroj 14 October, 13:28
Al Richardson
vlastní túto položku
vlastní túto položku
McDonnell Douglas
F-4 Phantom II - Ejection Seats w/ Safety Belts (2 Pcs.) Quickboost 1:72
QB 72 011 200x Nový nástroj 14 October, 13:28
Al Richardson
vlastní túto položku
vlastní túto položku
F-4E Phantom II Early - interior 3D decals
Kelik 1:72
K72008 14 October, 13:27
Al Richardson
vlastní túto položku
vlastní túto položku
McDonnell Douglas
F-4E/J/F/G/S Phantom II - Exhaust Nozzles for Fine Molds ResKit 1:72
RSU72-0049 (RSU72-049) 2022 Nový nástroj 14 October, 13:27
nvg070
vlastní túto položku
vlastní túto položku
Junkers Ju 87G Stuka `Kanonenvogel´ [Luftwaffe Anti Tank Attacker]
Hasegawa 1:32
08075 (ST25) 2005 Nový nástroj 14 October, 13:25
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo