newsfeed
Mr D
pridal nový fotoalbum.
pridal nový fotoalbum.
44 snímky
Romanian lAR-80 Fighter Nový: 13 September, 12:48 1:48
projekt: Hobbyboss IAR-80
Scratchbuilt
20 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Mr D
pridal nový fotoalbum.
pridal nový fotoalbum.
52 snímky
Beriev Be-6 flying boat/ By Playfix -Veb -Plasticart &Revell /72No
Getting near to paint stage, the tail has X2 vertical stabilisers to go on,
Couple of rigging hooks, the engine cowli...
Scratchbuilt
24 24 July, 16:32
Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
1 August, 15:31
Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
1 September, 08:43
Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
1 September, 13:24
Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.
I'm very curious to see the result. I built this model as a young boy too.
4 September, 20:22
Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
4 September, 20:57
Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
7 September, 20:15
Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
12 September, 21:46
Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
13 September, 10:34
Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
13 September, 12:47
Roberto
pridal nový fotoalbum.
pridal nový fotoalbum.
13 September, 12:45
Tzonglin Wu
pridal nový fotoalbum.
pridal nový fotoalbum.
81 24 July, 03:09
Thomas Kolb
That weathering looks awesome. What technique did you use? Just oil paints?
That weathering looks awesome. What technique did you use? Just oil paints?
9 August, 10:20
Cuajete
Very nice painting job and weathering 👍. I have the same question that Thomas.
Very nice painting job and weathering 👍. I have the same question that Thomas.
9 August, 17:31
Tzonglin Wu
Thank you all for your likes.
For me, this time is also an experiment. It's my first time to build a kit like this way.
I'm looking for a quick way to save time while I'm busy at work.
This time I didn't use primer or do pre-shading.
I airbrushed whole fuselage with the main color.
Then refer to photos, hand brushed the darker and lighter colors to create difference.
I think this make the shade effect.
Until this process, only water-based acrylic paint had been used.
In the #13~#15 pictures shown, I have used Mr. Weathering's black to create the panel line.
Yesterday, I covered the plane with mat varnish, I found that the contrast became smaller.
I think I should increase the contrast before the mat varnish in the future.
My weathering process is not over yet.
Oil paints, color pencils, etc. may be used to enhance the effect.
Thank you all for your likes.
For me, this time is also an experiment. It's my first time to build a kit like this way.
I'm looking for a quick way to save time while I'm busy at work.
This time I didn't use primer or do pre-shading.
I airbrushed whole fuselage with the main color.
Then refer to photos, hand brushed the darker and lighter colors to create difference.
I think this make the shade effect.
Until this process, only water-based acrylic paint had been used.
In the #13~#15 pictures shown, I have used Mr. Weathering's black to create the panel line.
Yesterday, I covered the plane with mat varnish, I found that the contrast became smaller.
I think I should increase the contrast before the mat varnish in the future.
My weathering process is not over yet.
Oil paints, color pencils, etc. may be used to enhance the effect.
12 August, 07:04
Romain Sablou
Nice weathering, we can clearly see that you worked closely with photos references. What did you use for the main color ?
Nice weathering, we can clearly see that you worked closely with photos references. What did you use for the main color ?
14 August, 04:41
Tzonglin Wu
Hi, Romain. I mixed that color by myself. I selected a photo as reference and mixed grey, blue, black and white to approach the photo.
Hi, Romain. I mixed that color by myself. I selected a photo as reference and mixed grey, blue, black and white to approach the photo.
12 September, 06:29
Romain Sablou
Final picts are top-notch, so as the model in itself ! Damn, I've got the same kit waiting in stash, but you set the bar high !
Final picts are top-notch, so as the model in itself ! Damn, I've got the same kit waiting in stash, but you set the bar high !
13 September, 12:41
Jeff Kosty
vlastní túto položku
vlastní túto položku
F/A-18A/B/C/D Hornet Seamless Intake Set (+ bulged tire/wheels)
RHINO MODELWORKS 1:32
RM32004 13 September, 12:41
Patrick Boogie
označil túto položku ako obchodovateľnú / predajnú
označil túto položku ako obchodovateľnú / predajnú
Tornado Access Ladder
Paragon Designs 1:32
32038 Cena zatiaľ nebola poskytnutá
13 September, 12:34
strds90
vlastní túto položku
vlastní túto položku
Japanese Army Experimental Fighter
Mitsubishi Ki-109 Interceptor Box states 1:72 scale Micro Ace 1:75
53023-2000 (3) 200x Nové pole 13 September, 12:34
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo