newsfeed
TH SCALE MODELS (Thomas Haberl)
pridal nový fotoalbum.
pridal nový fotoalbum.
33 snímky
EDUARD FW190A-8/R2 FULL BUILD SINGLE STEPSNový: 28 October, 18:27 1:72
projekt: EDUARD FW190A8/R2
107 21 February, 19:34
TH SCALE MODELS (Thomas Haberl)
Welcome and thanks for your motivating words @Alec . First time I use something 3D printed and until now I enjoy it ☺️
Welcome and thanks for your motivating words @Alec . First time I use something 3D printed and until now I enjoy it ☺️
25 February, 16:41
TH SCALE MODELS (Thomas Haberl)
Welcome @Nicolas, @ Rui and @DerMattes - thanks for your interest in this build 😊
Welcome @Nicolas, @ Rui and @DerMattes - thanks for your interest in this build 😊
26 February, 14:59
TH SCALE MODELS (Thomas Haberl)
A small update here ... engine took my a while to get fitted in the fuselage. Didn´t work precisely enough so I got paid off when I tried to put the engine in. Anyway I solved it somehow without any major visible impact.
A small update here ... engine took my a while to get fitted in the fuselage. Didn´t work precisely enough so I got paid off when I tried to put the engine in. Anyway I solved it somehow without any major visible impact.
11 March, 20:42
Rui
I gotta. say that I really appreciated there build posts that people share; its a real treat to see a bunch of plastic and such come together into a masterpiece! I learn so much from watchings.
I gotta. say that I really appreciated there build posts that people share; its a real treat to see a bunch of plastic and such come together into a masterpiece! I learn so much from watchings.
11 March, 23:46
TH SCALE MODELS (Thomas Haberl)
Welcome @Skyhiker - thanks for your interest on this build @Rui thanks for your kind words, even if I don´t think that anybody can learn much from my work .... but this is exactly what this stunning community is for ... I learned so much from people´s builds here ...
Welcome @Skyhiker - thanks for your interest on this build @Rui thanks for your kind words, even if I don´t think that anybody can learn much from my work .... but this is exactly what this stunning community is for ... I learned so much from people´s builds here ...
12 March, 08:09
Alec K
Glad you solved the hurdle. Any ideas why the engine did not fit, or what the issue was?
Glad you solved the hurdle. Any ideas why the engine did not fit, or what the issue was?
12 March, 12:37
Bruce Huxtable
1:72? I would have trouble with those tiny PE part of it were 1:32!! Well done on your precise work.
1:72? I would have trouble with those tiny PE part of it were 1:32!! Well done on your precise work.
12 March, 13:04
J35J
Great work Thomas!
Really impressed of your clean build and how you apply thiny amount of glue on all delicate small PE parts without creating a mess.
Great work Thomas!
Really impressed of your clean build and how you apply thiny amount of glue on all delicate small PE parts without creating a mess.
12 March, 13:16
TH SCALE MODELS (Thomas Haberl)
thank you all for your kind words - I really appreciate that and this motivates me to constantly push myself out of the comfort zone .... thanks thanks thanks!!!! @Neuling: I know your skills so I´m really glad you came around my build: the answer is patience and a glass of good wine 😆 @Alec: as you can see the engine comes in a lot of tine parts and I didn´t pay enough attention when removing the print support and grinding the parts down properly. This resulted in a too long engine assembly. Lucky my I always spend a lot of time on dry-fits so I recognized it before starting to glue it in. Almost complete front end is made of printed parts and slightest deviations result that engine cowlings won´t fit together. Not a must to have them completely align when you show them open but I want to paint the all in one and then open the cowlings once done ...
thank you all for your kind words - I really appreciate that and this motivates me to constantly push myself out of the comfort zone .... thanks thanks thanks!!!! @Neuling: I know your skills so I´m really glad you came around my build: the answer is patience and a glass of good wine 😆 @Alec: as you can see the engine comes in a lot of tine parts and I didn´t pay enough attention when removing the print support and grinding the parts down properly. This resulted in a too long engine assembly. Lucky my I always spend a lot of time on dry-fits so I recognized it before starting to glue it in. Almost complete front end is made of printed parts and slightest deviations result that engine cowlings won´t fit together. Not a must to have them completely align when you show them open but I want to paint the all in one and then open the cowlings once done ...
12 March, 17:59
TH SCALE MODELS (Thomas Haberl)
@Neuling … who drinks beer in glasses? 😂 but I guess it will work
@Neuling … who drinks beer in glasses? 😂 but I guess it will work
12 March, 21:02
TH SCALE MODELS (Thomas Haberl)
@Trez: as you may have seen in previous comments, the most important thing is to really carefully sand all components down. Tend to say do a little more. There are many components coming together (assembled engine itself, manually modified fuselage, printed cowlings, ... ) and should fit properly in the end to avoid any gaps or twists in the final assembly. I think it would be tricky even in bigger scale. 1/72 scale has no mercy in this complex assembly of the plane front end. I managed it, but didn´t upload any pictures here so stay tuned 😊
@Trez: as you may have seen in previous comments, the most important thing is to really carefully sand all components down. Tend to say do a little more. There are many components coming together (assembled engine itself, manually modified fuselage, printed cowlings, ... ) and should fit properly in the end to avoid any gaps or twists in the final assembly. I think it would be tricky even in bigger scale. 1/72 scale has no mercy in this complex assembly of the plane front end. I managed it, but didn´t upload any pictures here so stay tuned 😊
5 April, 06:28
Sergej I
Following! 👍, great job with cockpit and engine so far.
I have the exact same setup for an F-8 Würger in the shelf 🙂
Following! 👍, great job with cockpit and engine so far.
I have the exact same setup for an F-8 Würger in the shelf 🙂
5 April, 06:38
TH SCALE MODELS (Thomas Haberl)
@Trez: I will share some when I´m back - currently traveling and far away from my bench. @Sergej: thanks for your positive feedback, I hope my experiences on this build help to make yours a little bit more straight forward 😆
@Trez: I will share some when I´m back - currently traveling and far away from my bench. @Sergej: thanks for your positive feedback, I hope my experiences on this build help to make yours a little bit more straight forward 😆
5 April, 17:28
TH SCALE MODELS (Thomas Haberl)
After a longer break on this I was finally able to restart on this build. Main engine components placed in fuselage, rivets added (as much as possible on this scale) and hydraulic tubes adde to landing gear. Now a bit of tedious work ... sanding and preparation for primer. Not much but in tricky places.
After a longer break on this I was finally able to restart on this build. Main engine components placed in fuselage, rivets added (as much as possible on this scale) and hydraulic tubes adde to landing gear. Now a bit of tedious work ... sanding and preparation for primer. Not much but in tricky places.
25 June, 19:39
Frank Brzobohaty
Great job, not the easiest in 1:72 scale is it Thomas? but it is rewarding when completed!
Great job, not the easiest in 1:72 scale is it Thomas? but it is rewarding when completed!
26 June, 16:21
TH SCALE MODELS (Thomas Haberl)
Thanks @Frank!! Indeed it was a challange, especially when working with these resin parts for the first time. But as you say, I hope it will be rewarding once the Würger is done 🤷♂️
Thanks @Frank!! Indeed it was a challange, especially when working with these resin parts for the first time. But as you say, I hope it will be rewarding once the Würger is done 🤷♂️
26 June, 18:03
TH SCALE MODELS (Thomas Haberl)
Thanks @Jürgen. Working on the main paints already … German camouflage in 1/72 is a challenge 🤣
Thanks @Jürgen. Working on the main paints already … German camouflage in 1/72 is a challenge 🤣
14 July, 07:03
TH SCALE MODELS (Thomas Haberl)
Many thanks @Shar! Appreciate it. I used the one and only (for me) Mr. Surfacer 1500.
Many thanks @Shar! Appreciate it. I used the one and only (for me) Mr. Surfacer 1500.
14 July, 08:09
Shar Dipree
Yes, I like to use that too (Mr. Surfacer ). What gun, nozzle size and pressure do you spray with?
Yes, I like to use that too (Mr. Surfacer ). What gun, nozzle size and pressure do you spray with?
14 July, 08:18
TH SCALE MODELS (Thomas Haberl)
Good choice 👍 I apply the primer with a H&S Evolution, 0.4mm nozzle and about 1-1.2bar pressure. Thinning ratio about 40/60
Good choice 👍 I apply the primer with a H&S Evolution, 0.4mm nozzle and about 1-1.2bar pressure. Thinning ratio about 40/60
14 July, 13:38
TH SCALE MODELS (Thomas Haberl)
Last weeks I was fighting ... fighting with myself to keep this model from trashing it. Almost by accident I learned that I planned to build it not historically correct. This plane didn't have cowling MG's, but everything was planned to display them. So I had to make a decision and decided to go historical correct and change parts on an almost completely painted model.
It was a fight in 1/72 ... some imperfections I successfully ignored in earlier building stages now payd off and made it really hard for me. It's not perfect yet and it won't be perfect ever, but I have some ideas to improve the remaining imperfections.
Definitely not a competition model anymore...
Last weeks I was fighting ... fighting with myself to keep this model from trashing it. Almost by accident I learned that I planned to build it not historically correct. This plane didn't have cowling MG's, but everything was planned to display them. So I had to make a decision and decided to go historical correct and change parts on an almost completely painted model.
It was a fight in 1/72 ... some imperfections I successfully ignored in earlier building stages now payd off and made it really hard for me. It's not perfect yet and it won't be perfect ever, but I have some ideas to improve the remaining imperfections.
Definitely not a competition model anymore...
22 August, 07:22
TH SCALE MODELS (Thomas Haberl)
@Trez: fully agree - and from this build I learned A LOT … I will finish this build for sure … some small corrections on misleading edges to be done and then I can go on with touch ups and clear coat to let the fun begin - decals and weathering 💪
@Trez: fully agree - and from this build I learned A LOT … I will finish this build for sure … some small corrections on misleading edges to be done and then I can go on with touch ups and clear coat to let the fun begin - decals and weathering 💪
22 August, 13:56
Skyhiker
This kit looks pretty decent. It seems a lot better than the Revell kit. Were there any problem areas?
This kit looks pretty decent. It seems a lot better than the Revell kit. Were there any problem areas?
22 August, 14:30
TH SCALE MODELS (Thomas Haberl)
The eduard kit is close to perfection - all issues I had were selfmade. The only concern, but a really small one is the orientation of the langing gear bay components. You have to be careful and put the parts together carefully almost by eye. If you dont put them in exact position it will lead to gaps between upper wing and fuselage (at least on one side). There could be better positioning. But nothing to worry ir you work precisely
The eduard kit is close to perfection - all issues I had were selfmade. The only concern, but a really small one is the orientation of the langing gear bay components. You have to be careful and put the parts together carefully almost by eye. If you dont put them in exact position it will lead to gaps between upper wing and fuselage (at least on one side). There could be better positioning. But nothing to worry ir you work precisely
22 August, 16:44
Juergen Klinglhuber
Go for it. We all are exited to see it passing the finish line despite all issues. 👍
Go for it. We all are exited to see it passing the finish line despite all issues. 👍
6 September, 19:24
TH SCALE MODELS (Thomas Haberl)
Thanks @Jürgen and @Skyhiker! Appreciate it. Decals are applied and final (or maybe not final, we will see) matt varnish also. She is ready for the oil party 🙂
Thanks @Jürgen and @Skyhiker! Appreciate it. Decals are applied and final (or maybe not final, we will see) matt varnish also. She is ready for the oil party 🙂
12 September, 18:08
TH SCALE MODELS (Thomas Haberl)
Many thanks @Frank and @DerMattes - I really appreciate it and to be honest I did not expect this result when I think back to the times where she was close to land in the trash … happy that I didn't 💪
Many thanks @Frank and @DerMattes - I really appreciate it and to be honest I did not expect this result when I think back to the times where she was close to land in the trash … happy that I didn't 💪
13 September, 06:32
TH SCALE MODELS (Thomas Haberl)
Done - some more pictures will be uploaded later. I would appreciate any feedback - thanks in advance & happy modeling. Cheers 🍻
Done - some more pictures will be uploaded later. I would appreciate any feedback - thanks in advance & happy modeling. Cheers 🍻
20 September, 10:43
Skyhiker
Really great results. Perfect paint job. That kit looks like it was made well. A heck of a lot better than the Revell kit.
Really great results. Perfect paint job. That kit looks like it was made well. A heck of a lot better than the Revell kit.
20 September, 13:24
TH SCALE MODELS (Thomas Haberl)
Thank you all for your nice and positive feedback! I appreciate it and I'm a bit overwhelmed at the same time. Thanks mates 🙏
Thank you all for your nice and positive feedback! I appreciate it and I'm a bit overwhelmed at the same time. Thanks mates 🙏
21 September, 06:12
Frank Brzobohaty
That is a fantastic job Thomas!!!!!!!!!!!!!!!!!! way to get it done.
That is a fantastic job Thomas!!!!!!!!!!!!!!!!!! way to get it done.
21 September, 19:11
TH SCALE MODELS (Thomas Haberl)
Thanks a lot @Rui and @Frank! Appreciate it a lot. It was a hell of a ride sometimes and all your positive feedback confirms my decision not to trash her 🙏
Thanks a lot @Rui and @Frank! Appreciate it a lot. It was a hell of a ride sometimes and all your positive feedback confirms my decision not to trash her 🙏
22 September, 07:58
Frank Brzobohaty
Thomas, I expect to see a 1st or 2nd place trophy sitting beside that beautiful model some time soon!
Thomas, I expect to see a 1st or 2nd place trophy sitting beside that beautiful model some time soon!
22 September, 17:22
TH SCALE MODELS (Thomas Haberl)
Thanks @Frank!! I´m blushing, but I'm not sure if I ever show it on a competition ... in my opinion it´s not a competition model. Maybe I´m wrong ... I don't know. I´m a beginner with 6 finished models so I will have some more to present in the future .... but thanks for your motivating words - I appreciate it a lot 🙃
Thanks @Frank!! I´m blushing, but I'm not sure if I ever show it on a competition ... in my opinion it´s not a competition model. Maybe I´m wrong ... I don't know. I´m a beginner with 6 finished models so I will have some more to present in the future .... but thanks for your motivating words - I appreciate it a lot 🙃
22 September, 18:02
TH SCALE MODELS (Thomas Haberl)
If you are interested in the final pictures and some other perspectives, feel free to check the album: EDUARD FW190A-8/R2 FINAL SHOOTING | Album by _th84_ (1:72) Cheers
If you are interested in the final pictures and some other perspectives, feel free to check the album: EDUARD FW190A-8/R2 FINAL SHOOTING | Album by _th84_ (1:72) Cheers
22 September, 18:07
Frank Brzobohaty
Take my word on it Thomas, that is a show winner and maybe even best in show. If this is the quality at 6 kits looking forward to see your work in the future.
All the final pics are incredible. You should make a display base for it.
Take my word on it Thomas, that is a show winner and maybe even best in show. If this is the quality at 6 kits looking forward to see your work in the future.
All the final pics are incredible. You should make a display base for it.
23 September, 15:06
TH SCALE MODELS (Thomas Haberl)
Thank you so much for your really nice feedback! You are almost pushing me to present it on a show 🤣 I will consider it and I will also try to do a small display base - thanks again
Thank you so much for your really nice feedback! You are almost pushing me to present it on a show 🤣 I will consider it and I will also try to do a small display base - thanks again
24 September, 09:49
TH SCALE MODELS (Thomas Haberl)
Many thanks @Frank - I really appreciate your feedback 🙏
Many thanks @Frank - I really appreciate your feedback 🙏
13 October, 06:26
TH SCALE MODELS (Thomas Haberl)
Happy to announce this build was awarded at Nitra Model Show 2024 - really more than happy about this award considering the challenges I made myself during this build - Cheers and happy modeling to all of you ☺️
Happy to announce this build was awarded at Nitra Model Show 2024 - really more than happy about this award considering the challenges I made myself during this build - Cheers and happy modeling to all of you ☺️
28 October, 18:29
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
34 snímky
Flash, mould lines, sink marks, ejection pin marks and a little bit of kit thrown in. 1:72
projekt: Foden C-Type Steam Lorry
61 11 October, 15:30
David Taylor
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL
11 October, 18:28
Rui S
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄
12 October, 01:50
gorby
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳
Thanks all for tagging along. 🙂
12 October, 06:54
Kesa Tiho
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍
13 October, 18:46
gorby
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂
14 October, 14:56
Mr D
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍
14 October, 17:02
Alec K
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
Another scratch project? I am of course in 👍. A wee bit of a depressing preamble (lots of which I identify with), hope you are ok mate 👍.
Excellent progress btw.
19 October, 12:14
Mr D
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
Nice to see scratch build 😃👍
Always inspires and helps to learn new skills.
Looking great so far... Good work 😁👍
19 October, 14:01
gorby
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
Sorry Alex, I thought I'd attached the (very basic) kit to the project, and I'm fine - thanks mate.
Thanks all, I'm enjoying adding a few bits to this thing and glad you like it. 🙂
19 October, 14:23
David Goodchild
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
I feel like I'm a bit late to this party, but this is really fantastic; not just the effort you're putting into it gorby, but the history, the humour and the imagination and research too. It's your model, you make it your way and it's a pleasure to see so much experience and skill put to such satisfying effect. 👍👍😎
22 October, 10:29
Łukasz Gliński
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
X-4, my fav colour! 😄 I have to admit this colour setup looks very die-cast-Matchboxish 😄
22 October, 11:14
gorby
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
Better late than never David. Thanks for the lovely comment. I think some people take this hobby a bit too seriously so I like to do the exact opposite. 🙂
You're right Lukasz, the colour does look a bit die-cast doesn't it? 😄
I need to drag myself away from using X-4 – even if I think it suits oldie-worldie vehicles. I don't want to be thought of as a one trick pony. I'm at least a two trick pony. 😄 😄
22 October, 12:39
Łukasz Gliński
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
Nah, X-4 fits much more than that: Blue Jetstream (SP-KWN) | Project by Woody (1:72)
22 October, 13:23
David Goodchild
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
People always like to take things seriously, even when they possibly shouldn't! Really look forward to the next update! 👍
22 October, 14:27
Mr D
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
It happens sometimes! I've had this alot with brush painting, l think the brush would push paint under.
I use a masking fluid on top of any awkward masks now.
You will get it tidied ok.
👍👍
22 October, 15:43
gorby
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
I completed the build yesterday and other than the headlights being a bit too big I'm happy with how it turned out. I ended up really enjoying the build and thanks to every one for following. 👍
27 October, 11:41
bughunter
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
What a nice little lorry! I hear some sound of the steam engine ...
A nice street too. That might be a good idea to seal it with thinned PVA, I'll have to remember that for the future.
27 October, 12:01
Alec K
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
Very nicely done Gorby! The colors are apropo I think, and I like that photo booth (nice dual purpose set up) 👍
27 October, 12:56
Łukasz Gliński
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
Exqusite job! Looks like a bigger scale, 43rd at least 👍
And dat colours and weathering, like Matchbox Yesteryear series taken out of storage after all these years 😄
@John: will do, but only when we start seeing these bigly huge matchsticks 😄
27 October, 17:38
Kesa Tiho
I love that Gorby's builds comment section became like a little scalemates get together 😂
I love that Gorby's builds comment section became like a little scalemates get together 😂
27 October, 22:15
gorby
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
WOW! That's a very nice surprise to find in the morning. 🙂
I'm amazed that such a tiny model has had such a big response. Thanks you everyone for taking the time to comment. 👍
John: My 1/72 vehicle fixation was a Zsolt's fault….thanks Zsolt. 🙂
Bugs: What's this? Has the world turned upside down? Me teaching Bughunter something. 😄
Alec: It's also because I'm too tight to buy a photo tent, did I forget to mention that bit. 😄
Kesa: Photo 28 explains how I made the base – it's as quick, simple and cheap as it's possible to make a reasonably decent base.
Lukasz: I'm stttiiilll looking for those huge matches. 😄
Thanks again to everyone who commented or liked. 👍
28 October, 05:54
Bohrmann
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
Beautiful model sir !!! 👍🏻👍🏻👍🏻 In the pictures the model doesn't look that small, certainly not 1/72 scale. Only in slide #34 where you can make the comparison with the match does it dawn on me that this really is a small model. Unless the matches in the Uk are a lot bigger than on the continent. 😉
28 October, 15:15
gorby
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
Thanks you very much Bohrmann and Finn! 🙂
It really is a tiny little thing - only 9cm long. I did wonder what I was doing with my life when I spent several days detailing the minuscule cab area. 😄
28 October, 17:08
Mr D
I like the wheels.... They have that heavy cast look, the red looks period too.
👍👍
I like the wheels.... They have that heavy cast look, the red looks period too.
👍👍
28 October, 18:15
Simon Nagorsnik
pridal nový fotoalbum.
pridal nový fotoalbum.
5 snímky
1:35 Type94 Te-Ke1:35
Part1~ Tankette: finished
Part2~ Itsuka- Chan: finished
Part3~ Base: a long way off
When it goes on... no idea...
projekt: 1:35 IJA Type94 Tankette
42 5 March 2023, 14:04
Neil Patrick
Beautiful work as always Simon. Even in 1/35, this must be tiny. I do like these Japanese camo schemes and yours is magnificent. I always struggle to understand what Manga characters have to do with historical scale models. Maybe if I was Japanese I'd get it!
Beautiful work as always Simon. Even in 1/35, this must be tiny. I do like these Japanese camo schemes and yours is magnificent. I always struggle to understand what Manga characters have to do with historical scale models. Maybe if I was Japanese I'd get it!
5 May 2023, 19:27
Simon Nagorsnik
Thanks so much for all your nice comments mates!
@Neil: why not?! A little imagination and ingenuity never hurt, did it? 😉😁
Thanks so much for all your nice comments mates!
@Neil: why not?! A little imagination and ingenuity never hurt, did it? 😉😁
6 May 2023, 19:38
Chan Li
That's Simon's shot, I'm no longer shocked again. But I'm waiting for the girl 😁.
That's Simon's shot, I'm no longer shocked again. But I'm waiting for the girl 😁.
7 May 2023, 02:17
Neuling
This beautiful model doesn´t need any living models to shine .............. 🙂
This beautiful model doesn´t need any living models to shine .............. 🙂
7 May 2023, 07:50
Neil Patrick
@Simon. You're right. I just read up on the history of Manga and learned what a significant part of Japanese culture it is. 🙂
@Simon. You're right. I just read up on the history of Manga and learned what a significant part of Japanese culture it is. 🙂
8 May 2023, 07:53
Robbie
So, in the first photo what are they saying/talking about? Is this related to or a spin off of Girls Und Panzers ?
So, in the first photo what are they saying/talking about? Is this related to or a spin off of Girls Und Panzers ?
27 July 2023, 22:04
Simon Nagorsnik
Thanks mates 😁
@Robbie: No, this is not a Girls & Panzer theme, but yes, it's fictional.
Fine Molds has a small series of 1/35 models called historic costume girls.
About the diolaog:
The German girl asks herself - doesn ́t she feel heavy?
The japanese girl proudly says - real scale!!
To what extent it makes sense, I'm not quite sure yet 😅
But it was translated to me by a competent man.
The font at the top and bottom of the picture concerns the name of the kit and its appearance.
I liked the picture, so I took it as a teaser, it stands out 😁
Thanks mates 😁
@Robbie: No, this is not a Girls & Panzer theme, but yes, it's fictional.
Fine Molds has a small series of 1/35 models called historic costume girls.
About the diolaog:
The German girl asks herself - doesn ́t she feel heavy?
The japanese girl proudly says - real scale!!
To what extent it makes sense, I'm not quite sure yet 😅
But it was translated to me by a competent man.
The font at the top and bottom of the picture concerns the name of the kit and its appearance.
I liked the picture, so I took it as a teaser, it stands out 😁
1 August 2023, 05:47
Laliscale
What a beautiful project! Very nice highlights on figures and I love the vehicle paint job too.
What a beautiful project! Very nice highlights on figures and I love the vehicle paint job too.
17 September 2023, 19:00
GUILLAUME C
pridal nový fotoalbum.
pridal nový fotoalbum.
29 22 September, 19:41
GUILLAUME C
Hi, Thanks. Mainly OOB, with some improvements, like on the engine where rods where missing.
Hi, Thanks. Mainly OOB, with some improvements, like on the engine where rods where missing.
30 September, 07:08
GUILLAUME C
I will left this uniform, to hard to have te same result as real at this scale.
I've tried before, on spare part, with 2 metal colors and even if I use my 0.2mm airbrush, the result is awfull
I will left this uniform, to hard to have te same result as real at this scale.
I've tried before, on spare part, with 2 metal colors and even if I use my 0.2mm airbrush, the result is awfull
11 October, 17:29
Michael Kohl
It certainly does. Not easy by any means and much better than the preliminary tests I did so far.
It certainly does. Not easy by any means and much better than the preliminary tests I did so far.
13 October, 16:39
GUILLAUME C
For you attention, I use Vallejo duralumin for base coat, then, dark alu with a thin brush, I use only the tip to have the finest line I should, and draw random line with.
For you attention, I use Vallejo duralumin for base coat, then, dark alu with a thin brush, I use only the tip to have the finest line I should, and draw random line with.
13 October, 17:20
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo