newsfeed
Ogre-Trombone
pridal nový fotoalbum.
pridal nový fotoalbum.
20 27 August, 02:37
Skyhiker
Please let us know when you upload new photos. I don't want to miss anything.
Please let us know when you upload new photos. I don't want to miss anything.
21 September, 04:44
Ogre-Trombone
I found some time to work on these kits, so here are some new photos. Thanks for following!
I found some time to work on these kits, so here are some new photos. Thanks for following!
22 September, 07:31
Nicolas
The instruction isn't mentioning the stand at all. As the torpedo is under the COG I would try to fix it to the torpedo.
Very nice progres so far. 👍
The instruction isn't mentioning the stand at all. As the torpedo is under the COG I would try to fix it to the torpedo.
Very nice progres so far. 👍
22 September, 07:39
Ogre-Trombone
Leaning that way, Nicolas. I don't like it, but that's probably what I'll need to do.
Leaning that way, Nicolas. I don't like it, but that's probably what I'll need to do.
22 September, 19:09
Mr D
Nice model 👌
Was the Devastator similar to the Dauntless??
Like the subject....will be watching 😃👍
Nice model 👌
Was the Devastator similar to the Dauntless??
Like the subject....will be watching 😃👍
22 September, 19:25
Ogre-Trombone
@Mr D, the Devastator was a pre-War torpedo bomber that was one of the most advanced aircraft of its time. Unfortunately. it was already obsolete at the start of the war. It was slow and underpowered, and early-War tactics left its crews extremely vulnerable.
@Mr D, the Devastator was a pre-War torpedo bomber that was one of the most advanced aircraft of its time. Unfortunately. it was already obsolete at the start of the war. It was slow and underpowered, and early-War tactics left its crews extremely vulnerable.
24 September, 13:49
Skyhiker
The Douglas TBD Devastator, was the U.S. Navy's main torpedo bomber. It was introduced in 1935, but was obsolete by 1939. They were replaced with the Grumman TBF Avenger.
The Douglas TBD Devastator, was the U.S. Navy's main torpedo bomber. It was introduced in 1935, but was obsolete by 1939. They were replaced with the Grumman TBF Avenger.
24 September, 16:09
Mr D
Thanks for the info
Ogre & Skyhiker 👍👍
I didn't know much about them, the pre-war yellow wings are smart scheme 👌
Thanks for the info
Ogre & Skyhiker 👍👍
I didn't know much about them, the pre-war yellow wings are smart scheme 👌
24 September, 19:20
Mike Szwarc@scalemates
Reporting: NO, this is definitely not a spammer
NO, this is definitely not a spammer
SPAM ALERT
Please help usVerify this user and jeho posts and agree or disagree with this user being a spammer: Go to vote page
Reporting: NO, this is definitely not a spammer
NO, this is definitely not a spammer
SPAM ALERT
Please help usVerify this user and jeho posts and agree or disagree with this user being a spammer: Go to vote page
30 September, 00:31
Fishbed77
označil túto položku ako na objednávku
označil túto položku ako na objednávku
F4F-4 early Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
82202X 2022 Zmenené ??? 30 September, 00:28
Erik Torp
pridal nový fotoalbum.
pridal nový fotoalbum.
14 snímky
Tamiya M151A1 VietnamNový: 30 September, 00:24 1:35
Allmost finished.
projekt: M151A1 Utility Truck
4 16 September, 19:13
Fishbed77
označil túto položku ako na objednávku
označil túto položku ako na objednávku
A6M2 Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
82211X 2021 Nové pole 30 September, 00:20
Fishbed77
označil túto položku ako na objednávku
označil túto položku ako na objednávku
Fw 190A-8/R2 Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:48
82145X 2019 Nové diely 30 September, 00:19
Casey Beckett
pridal nový fotoalbum.
pridal nový fotoalbum.
55 snímky
Trippple Coral Atoll Qs Nový: 30 September, 00:18 1:72
first shot primer after initial seams and wing join sanding - not much needed anywhere
projekt: Trippple Airacobra speed build
11 3 September, 00:25
Joseph Quintinita
chce túto položku
chce túto položku
M142 High Mobility Artilery Rocket System (HIMARS) Detail-up Set for Trumpeter kit
Tetra Model Works 1:35
ME-35076 2023 Nový nástroj 30 September, 00:13
Bill Newcomer
pridal nový fotoalbum.
pridal nový fotoalbum.
21 snímky
American Restomod Workshop "GRAND OPENING"Nový: 29 September, 23:35 1:25
Low angle of installed lights
projekt: Diorama, Garage
23 1 August 2020, 19:19
Bill Newcomer
Well Gents, It is finally done enough to make its debut. I present to you the Grand Opening of the American Restomod Workshop. Comments welcome.
Well Gents, It is finally done enough to make its debut. I present to you the Grand Opening of the American Restomod Workshop. Comments welcome.
1 August 2020, 19:31
Robbie
Mmmm. Wall to wall Mopars. My kind of place. I have 1:1 2016 Challenger R/T Plus Shaker in PQD Blue - 8D
Mmmm. Wall to wall Mopars. My kind of place. I have 1:1 2016 Challenger R/T Plus Shaker in PQD Blue - 8D
1 August 2020, 23:02
Munkyslut
Ahh Bill that's just gorgeous!!!!! I can't say enough good things about it, epic stuff mate 😉
Panther Pink AAR Cuda is icing on the cake 👍
Ahh Bill that's just gorgeous!!!!! I can't say enough good things about it, epic stuff mate 😉
Panther Pink AAR Cuda is icing on the cake 👍
1 August 2020, 23:49
Tom ...
Bill, that is really really something! Looks totally killer! Fantastic work, mate!
Bill, that is really really something! Looks totally killer! Fantastic work, mate!
2 August 2020, 01:41
Bill Newcomer
Nigel, Now that is something I have not thought of. I do have a few including a 1967 Chevy Fleetside I got from Bob.
Nigel, Now that is something I have not thought of. I do have a few including a 1967 Chevy Fleetside I got from Bob.
2 August 2020, 02:49
Bill Newcomer
Tom, Thank you. I guess it shows that if you put in enough effort and attention to detail, it just might turn out ok.
Tom, Thank you. I guess it shows that if you put in enough effort and attention to detail, it just might turn out ok.
2 August 2020, 02:50
Bill Newcomer
Dust yeah, well, It will be inside my display case. I just need to get better at keeping the door closed when sanding.
Dust yeah, well, It will be inside my display case. I just need to get better at keeping the door closed when sanding.
2 August 2020, 04:18
Bill Newcomer
Bob, It has been disturbing me too. That is why I am psyching my self up for a batch of Ford builds. Your Mustang hood is on the left wall and the Ford logo is in the center if you hadn't noticed.
Bob, It has been disturbing me too. That is why I am psyching my self up for a batch of Ford builds. Your Mustang hood is on the left wall and the Ford logo is in the center if you hadn't noticed.
26 August 2020, 07:28
Bob Hall
First On Race Day Guess that does make sense, Fords don't spend nearly the time in a repair shop a much as Mopar and GM products ! LOL ! But on a serious note, this is down right awesome Bill !
First On Race Day Guess that does make sense, Fords don't spend nearly the time in a repair shop a much as Mopar and GM products ! LOL ! But on a serious note, this is down right awesome Bill !
26 August 2020, 17:14
Robbie
Ok - the other side of it - F@cked Over Rebuilt Dodge | Frequent Overhauls Required Daily | F@cked On a Raunchy Deal | Found on Roadside Dead | Fix Or Repair Daily...
Ok - the other side of it - F@cked Over Rebuilt Dodge | Frequent Overhauls Required Daily | F@cked On a Raunchy Deal | Found on Roadside Dead | Fix Or Repair Daily...
26 August 2020, 21:13
Bob Hall
I just noticed one over looked, but very necessary item in you garage. The Fender covers.
[img1]
I just noticed one over looked, but very necessary item in you garage. The Fender covers.
[img1]
26 August 2020, 23:18
Bob Hall
Better ? Don't want to hurt any feelings LOL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[img1]
Better ? Don't want to hurt any feelings LOL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[img1]
27 August 2020, 01:46
Bob Hall
I seen your Gold and Black beauty, and figured that would be your flavor ! LOL !!!!!!!!!!!!!!
I seen your Gold and Black beauty, and figured that would be your flavor ! LOL !!!!!!!!!!!!!!
27 August 2020, 06:33
Bill Newcomer
Bob, very perceptive of you. 🙂 Nigel, maybe after I get some people. James, Thanks.
Bob, very perceptive of you. 🙂 Nigel, maybe after I get some people. James, Thanks.
28 August 2020, 04:20
Bozzer
I'm gonna keep coming back to this. There's so much detail, it's too much to take in, at once! Many congratulations Bill, this is definitely something to be proud of!
I'm gonna keep coming back to this. There's so much detail, it's too much to take in, at once! Many congratulations Bill, this is definitely something to be proud of!
18 November 2020, 21:17
Dominik Weitzer
btw...this yellow convertible on the lift looks like mine - without the "trunkreck" 🙂
btw...this yellow convertible on the lift looks like mine - without the "trunkreck" 🙂
5 May 2021, 05:59
Bill Newcomer
I decided to upgrade my diorama with some LED lighting to improve my pictures of future builds.
I made a quickie mock up to see how they would work. While bright enough, I learned that I need to have some of them near the front edge to make the foreground light the viewer's side of any vehicles inside.
I decided to upgrade my diorama with some LED lighting to improve my pictures of future builds.
I made a quickie mock up to see how they would work. While bright enough, I learned that I need to have some of them near the front edge to make the foreground light the viewer's side of any vehicles inside.
23 May 2021, 06:23
Bill Newcomer
Thanks guys. The test only used 16 of 20 of the fixtures. I ordered some 6-32 mounting hardware last night and cut my lid this morning. I think I will need a bit of angle aluminum to stiffen the front edge and provide positive locating of the sides. Meanwhile, back to finishing up my Mustangs.
Thanks guys. The test only used 16 of 20 of the fixtures. I ordered some 6-32 mounting hardware last night and cut my lid this morning. I think I will need a bit of angle aluminum to stiffen the front edge and provide positive locating of the sides. Meanwhile, back to finishing up my Mustangs.
23 May 2021, 21:18
Bill Newcomer
My hardware came so I got right to installing the LEDs onto the "ceiling". I soldered everything to keep from having issues. The lights are somewhat a "cool white" as opposed to a warm white. Live viewing it looks pretty good. For photos I think I still need some foreground lights. My super shiny floor may force me to add some sort of light diffuser like parchment paper.
My hardware came so I got right to installing the LEDs onto the "ceiling". I soldered everything to keep from having issues. The lights are somewhat a "cool white" as opposed to a warm white. Live viewing it looks pretty good. For photos I think I still need some foreground lights. My super shiny floor may force me to add some sort of light diffuser like parchment paper.
30 May 2021, 06:13
Jarrett
Absolutely Stunning Bill! I was thinking about buying one of those old racing trailers - I see you probably used the parts but as a trailer what do you think?
Absolutely Stunning Bill! I was thinking about buying one of those old racing trailers - I see you probably used the parts but as a trailer what do you think?
10 March 2022, 20:31
Bill Newcomer
I have two of the racing trailers. One is the Ernie Irvan one and one is the Bill Elliot one. Yes I did steal some of the interior parts for my diorama. My plan (way down the road) is to build one with all the goodies and one closed up. I want to set them up as two nostalgic front engine dragster haulers.
Racing Team Transporter (AMT/ERTL 6802, 1:25)
Stock Car Transporter (AMT/ERTL 6019, 1:25)
Peterbilt 377 A/E (Italeri 740, 1:24)
Ford AeroMax 120 (Revell 7247, 1:24)
Two Much (AMT/ERTL 21489P, 1:25)
Ramchargers AA Fuel Dragster (MPC 30108, 1:25)
I have two of the racing trailers. One is the Ernie Irvan one and one is the Bill Elliot one. Yes I did steal some of the interior parts for my diorama. My plan (way down the road) is to build one with all the goodies and one closed up. I want to set them up as two nostalgic front engine dragster haulers.
Racing Team Transporter (AMT/ERTL 6802, 1:25)
Stock Car Transporter (AMT/ERTL 6019, 1:25)
Peterbilt 377 A/E (Italeri 740, 1:24)
Ford AeroMax 120 (Revell 7247, 1:24)
Two Much (AMT/ERTL 21489P, 1:25)
Ramchargers AA Fuel Dragster (MPC 30108, 1:25)
11 March 2022, 06:08
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo