newsfeed

gorby
I like the idea for ground litter.

Ben M
👁️👁️

Spanjaard
very interesting!

Thomas E. autor
Thank you for your interest. Vegetation? Two of my dioramas were located in the Tundra of Lappland (Aerosan) and in the Sahara (SAS, LRDG). Now, that should change. I think about scenes in Vietnam, the finnish Taiga: trees 🙁 ... I've much to learn 🙂

Ben M
How did you make the joints on the bamboo?

Thomas E. autor
I use floral wire (0,35 mm), bend it around the skewer and encase it with a drop of wood glue by my finger. Basic Colour is dark green
brightened with yellow.

Nicolas
👀

Thomas E. autor
Thanks for watching 🙂 - tomorrow there'll be new stuff, a little bit ...

Thomas E. autor
Thank you Daniele and all the others - next weekend I'll look to have some informations about camouflage with branches and so.

Villiers de Vos
Very nice work.

Rui S
Nice work, indeed 👍

Thomas E. autor
@Villiers and Rui: Thank you! Very motivating. Also I like the likes. Thanks. 🙂
Next weekend a new theme is planned: weeds. My long term aim: to build a diorama of the training ground of Chiba Tank School (and the vegetation) to present Japanese tanks.

Neuling
Nice battle of flowers .. 🙂

Guy Rump
Nice work. 👍

Thomas E. autor
Thank you, very kind and motivating. Also I'm thinking about plastinating real plants ...

Thomas E. autor
... and spring is harvest time!

Thomas E. autor
Thank you to Franck and the others. 🙂

Sy Bar autor
Had hoped to build this great looking car OOB but I've some how mislaid the all be it limited decal sheet. I was going to have a go at doing my own decals or stencils but in look for info I found a sheet from DECALDOC.COM which includes all the extra advertising.

Alberto
Nice effort with the scratch building, it's a great improvement 👍

Sy Bar autor
Thanks #Alberto.
While I know some go for total accuracy I thought with this scale I'd go for the appearance for reality which give impression of what is believed to be real

John Lambert
That's great work on this kit. I was gifted one last year and built it pretty much straight from the box. Your additions really take it to the next level.

Guy Rump
Looking good, following. 👍

Mark Sherwood
H'mmm. At the moment it's looking like a Machinen Krieger flyer. Masterful work on that old kit though. 👍🥸🤘

Sy Bar autor
Cheers folks sorry for the tardiness of progress, things just keep getting in way.
Hope to get some colour on today finally

Michael Kohl
Following

Sy Bar autor
The shop.decaldoc.de/index.php decals are great design but are a bit of a challenge for me. I find them tricky to get into the grooves so much so I totally messed up the roof top gold and had to cobble together a cover from extra gold decals. I'm not sure how they will take the layering yet so will leave them over night. I like the use of a silver base layer to boost the decals colour and prevent paint colour leaking and affecting the top decal. Another point on decaldoc decals is the top film is the whole decal sheet so you have to cut each out and there is no placement image so a good subject reference is required.

That all said they look good so 🤞I don't mess them up any further

Ben M
Neat trick with the silver. Thank you for showing us.

Alberto
The Ford is looking nice, Sy! I didn't know about the silver either, it might be useful in the future 👍

Sy Bar autor
#Ben M &#Alberto thanks for the comments as for the silver under the top decal they work great and are provided the correct size and shape by the decal producer Decaldoc of Germany. I'd never seen this approach before and I'll keep the unused silver decals for future use on my own work as they really give the white a punch - seethe wee Ford logo on the side strip (no silver under ) compared to the white discs!

Sy Bar autor
Well the terror of removing mask struck and in internal glass is all messed up, it looks like moisture however time in sun and in airing cupboard does not help.. I'll continue to gloss and polish the bodywork then I'll take stock befor next steps. I may have a go at cutting out the glass to clean and replace testing a side window first, 🫣 yet more work on a fill in kit 🙄.
Lesson for today is do not fix glass with external masks on check the internal glass is clean, but there you go this is modelling not assembly. Least I've had practice replacing glass see my last model - RNLI Shannon Class Lifeboat | Album by Sybar (1:72)

builder_squirrel
Absolute beautifull! Acrilic or enamel paint for metal effect??

Petr Martinek autor
Thank you. Lacquer paints Alclad II by Ammo mig: Airframe aluminium, white aluminium and stainless steel.

Gordon Sørensen
Wow! The completed Mistel looks fantastic, Alec!

Jens
made absolutely ingenious 👍 👍 👍 the Fw 56 by Heller is just a hunk of plastic as a model in shape, beautiful and successful, my respect for the many work 👍

Stephan Ryll
Very nice work 👍

Chris Greathouse
very cool duo of planes!

gorby
Wow! Exceptionally good result Alec.

Marcel Klemmer
Fantastic project and a cool result.

Stefan Schacht
fantastic result 👍

Christian Bruer
Great work 👍

Alec K autor
Thanks very much mates! It took more time than I imagined, but then I was building two planes, wasn't I 😄

Jens, the Heller kit does indeed show its age, but I think it held up much better than the Airfix or KP kits from the same era. I would say that the short run Dfs kit was more frustrating. Cheers!

Soeren R.
Fantastic work!

David Januska
Awesome work and very interesting project. The result is great. Congratulations.

Neuling
I agee with David!

Alec K autor
Thanks guys! The history of the Mistel trials is very interesting indeed. Hope to build some of the other combinations at some point.

Mike Grant
That is just excellent work 👍

Alec K autor
Thanks Mike!

Finn
Cool!

Mark K
Superb!

Bart L
those crazy Germans!

Vincent
Great build. Never saw this before.

Skyhiker
That's an interesting take on the mistel. Two completely different planes than expected.

Guy Rump
Excellent, never seen this mistel before. 👍

Alec K autor
Thanks guys! This and two other combinations (featuring different fighter component) were design to explore troop delivery for operation Sea Lion. The latter, and better known, missile concept used the learnings from these early trials.

Rui S
Very interesting. Great work 👍

Dave Flitton
Excellent work!

Villiers de Vos
Booking my seat.

Chrisswe autor
Hope I can make it interesting to follow.
The kit doesn't seem very complicated and the Eduard photo etch is mild level. Just the open doors are a new thing for me. They might cause problems when painting and building modules together.

Guy Rump
Following too! 👍

Chrisswe autor
Progress has been slow but I got some work done last days.

Jörg Schäfer
Come on board too.

Chrisswe autor
I think this project will pick up pace now when I have finished Schleswig-holstein. This is the first ship I build with waterline option and it was very hard to fix the hull seam. I did several cycles of filling, sanding and priming and still it is very visible.

Villiers de Vos
Very nice progress.

Chrisswe autor
Thanks Villiers! My daughter asked me today if I had only built two ships and one small plane after working such a long time. She looked incredulous when I told her that was actually the case🙂

CaptGPF
The notorious "pocket battleship" Graf Spee! Taking a seat for this one!

Alec K
Had this in my stash for years, watching with interest 👍

David Taylor
Watching.

Jan Peters
Cool subject, will follow this 👀

Villiers de Vos
Very nice clean lines on the hull. My respect working with the small and delicate photo etch assemblies.

Chrisswe autor
Thanks Villiers! The PE isn't very complicated on this kit but I do feel I have made improvements since my last ship.

Agnius
Following. Nice progress!

Chrisswe autor
Thanks Agnius. I'm trying to stay focused on this project and progress has been good lately.
Unfortunately I had an accident today, I dropped the turmmast on the floor and two PE pieces were knocked off. I think it is repairable and could have been much worse.

J35J
Great progress!👍🏻

Ricardo Reis
Nice, following!

Jörg Schäfer
Fantastically painted. 👍

Chrisswe autor
Thanks J35J, Ricardo and Jörg! I'm happy with the painting, trying to find the right balance between the contrast effects and realism. I know ww2 ships and planes shouldn't look like space marines but I like when shading and highlights make models pop a little.

Rui S
Looking Great 👍

Chrisswe autor
Thanks Rui! I hope I can surpass my previous work.

Clair Greenwood
At 55 years old here it's really hard to stand on my head, if you go into advanced settings you can turn your photo's to face correctly. I know because I have to fix all of mine too. Have fun with the photo etch, thats actually my favorite part of building a model. You'll need a folding jig to do really nice bends, and for glue I've used and had great results with Clear Nail Polish, Microscale's Micro Kristal Klear, Mig Ultra Glue, and of course super glue. For positioning I do a 2 step process when my pe part is ready to install, first a tiny dab of Microscale's Micro Liquitape and let it dry a few minutes till it turns clear. It in now sticky like a very light adhesive and can be placed and manipulated into just the right position, then a dab of your choice of glue. If you go with any brand super glue and it's the thin kind I highly recommend a Glue Looper set, very cheap and will last forever. Clean up old glue on the tip with a cigarette lighter. Good luck and I hope you enjoy your build 🙂

Danny Ray autor
I've done a terrible job with my first ever part.
Glue looper? Why have I never heard of these things? lol we are practically twins. Well, I'm 56. With the modelling skills of a 5 year old 😳😂

Danny Ray autor
@lorraine are there actual female modellers? Clair is that a male name where you live? Surely there aren't 2 female modellers on earth? I'm showing my 1970's attitude here. 😳😂
By the way Lorraine cute cat. I have a dog but he's scared of cats. In fact he's even scared of doors! lol

Lorraine Lin
Danny, female modelers are relatively fewer in China, especially military modelers. But we do exist😜 And I also see many females in this community.

[img1]

Clair Greenwood
Thats ok Danny, Im 55 and act about 5 lol. I get along with my 3 year old grand daughter on the same level 🙂 Clair is a dude unless there's an e on the end usually. I have 2 cats, the one is super skittish, I remember when he was a kitten he farted, it scared him n he ran a good 15 feet before turning around to look at his butt. Hahaha

Clair Greenwood
Oh and to get that paper off use some nail polish remover. It dissolves super glue pretty quick. Then touch it up.

Rui
Great conversation going on here!

I have to catchup:

1st - I'm in the same age bracket at 59 with the modelling ability of a 90 year old who can't find his glasses 🙂

2nd - whats this I here about using a lighter to cleanup the tip on glue! How does that work? Is it for super glue cleanup? I'm always dealing with nasty clogs.

3rd - Where I live in Canada we have very few female modellers. In fact, I have never seen one. I have a theory that females can be amazing modellers because of small fingers. I don't have fat sausage fingers but they are big enough to get in the way of intricate work.

4th - @Danny I know another modeller on here named Jennifer. She is relative new to the hobby and already quite good. Lorraine's work is amazing!

Lastly - I have cats. I use to have dogs when I was younger, but now it's cats. They drive me crazy and I think the little assassins are trying to kill me, but I love them to bits.

Danny Ray autor
I love this site. So much good advice and just when I felt like giving up I get lots of lovely people encouraging me to carry on. Thank you. I also need to give a shout out to Jakko. I drive him crazy with almost daily questions and he's never once told me to stop and leave him alone! 🙂

@Rui, I'd love to see a few more females in the hobby. In fact I need a new wife and one who could help me build a model would be a definite bonus. It's all about the lack of sausage fingers, as you say 😂

Lorraine Lin
For PE parts, I use lighter to clean up the instant glue. It works very well, 100% burned up.

And sometimes, I wish I had a third hand, help me to hold the small parts so I can glue them together😛

Thomas Mayer
Remove superglue from a glue looper, a needle, blade, or whatever metal item you use, by holding it into the flame of a lighter. Let the tool cool of, remove residue with a paper towel.

Thomas Mayer
Glue loopers:
SCM Search: Glue applicators looper*

Danny Ray autor
Thanks Thomas.
@lorraine a third hand would be invaluable! In fact on a serious note are there items you can get to help with that? I often find myself wishing I had something to place a model in when I need to add a tricky part. I bought a small jewellers vice that I sometimes use but if there are other devices I'd love to try one!

Lorraine Lin
I bought a soldering helping hands in electronics store. It helps sometimes.

Danny Ray autor
I think I'll get one too Lorraine. By the way I'm seriously impressed at your skill. Are you a professional model maker? Or something similar? Film business?

Robert H.
I have the same kit on my workbench right now, take care the instructions have a few errors and some missing steps to do, just in case you haven't noticed

Lorraine Lin
Danny, I'm not a professional modeler. Building
models is just a hobby in my spare time. I've learned a lot of skills in this community.

Clair Greenwood
I have 3 or 4 helping hands of different sizes but this one is on my "snag it eventually" list : amazon.com/gp/produc..8B8CMKBF3NX&th=1 , should prove handy when I am repairing electronics as well.

Danny Ray autor
@Robert yeah I've noticed one error so far. I bet yours comes out a lot better than mine!

Danny Ray autor
@Clair, thanks I'll look at that. I think I'll buy one! 🙂

Danny Ray autor
@lorraine how long have you been modelling? You really are skilled. I'm very new to it but I think it'd take me at least a decade to get to your level!

Robert H.
@Danny, t's not about better, it's just about fun !! and you learn and get better with every model you build - may you've noticed that K3 and K4 track parts the designations are swapped, some drill holes that need to be made are not shown, best you download the instructions of the original Academy kit, last page shows some corretions .... scalemates.com/products/img/5/1/1/839511-44-instructions.pdf

Clair Greenwood
Well said Robert, without having a fun time we'd all be doing something else instead.

Lorraine Lin
@Danny, about 6-7 years. Agree with Robert and Clair, it's all about having a fun time. I enjoy those few hours late at night when I build models. I can fully immerse myself and forget about other worries. And I also enjoy to learn and to share with all the friendly mates here.

Danny Ray autor
I agree but I'm at the stage where I'm messing everything up. I think it'll be a lot more fun when I get a bit better and I have a system for doing things. I mostly make (so far. I have 61 kits and about 2/3rds are AFV) tanks. Can't decide whether it's better to spray the wheels and tracks before adding them or once they're glued in place. I'm veering towards the 'before' scenario. Same with the tools and things like machine guns and rifles (from my universal carrier). I don't feel confident at all with figures. In fact I'd even say they scare me. 😳😂

Robert H.
@Danny, take it easy, may start with your more simple kits, to mess something up sometimes is part of the never ending learning process and fortunely on armour models you can easy hide a mistake by covering it with something, at least mostly 😉 I airbrush the assembled main groups, hull, turret, wheels, tracks... separately. I also glue small things like tools before airbrushing to the hull, I've no problem to paint small things with a fine brush after... just look always what makes more sense. Figure painting is also not such a big deal, many tuturial on YT, start with simple guides.... and don't try to paint eyes, mostly not necessary at all 😮

Clair Greenwood
Danny bro,. you didn't mess anything up... Thats the beauty of modelling war machines, Battle Damage 🙂 I've been building models on and off since '74 and I still make colossal goofs here and there. I was doing a Santa Maria all wood kit and guess what, I goofed and cut off in scale probably about 10 feet on the poop deck. I just planked and kept going, now it's a pee deck that bring your own bottle Hahahaha. We all screw up dont fret just learn and do better on the next one buddy 🙂 As for painting, I always paint parts separately, my hands shake a good bit anymore so I'd make one hell of a mess if I didnt.

Danny Ray autor
Thanks chaps. Great advice. That made me laugh clair. Pee deck and bring your own bottle. 😂
I actually thought this yesterday. Why am I worrying about a rip in a wire mesh on a machine that's had dozens of armour piercing shells slung its way? Of course it's gonna look beaten up! That's a sure sign that I've not (yet) done any weathering whatsoever! 🙂

And Robert I agree. It's a good job I've (now) got 62 kits (just bought another panzer iv by Ryefield oh and a hetzer by Takom so 63 kits! (They were so cheap on temu. The Ryefield was just £11! Well with my discount.
I have now stopped buying. For now 🙂

Danny Ray autor
@lorraine. I hope I'm half as good as you in 6 years!

Lorraine Lin
Danny You surely can do better. Because I just joined this community last year, while you've been here since the very beginning😜

Danny Ray autor
Not me Lorraine. I only joined in November. Or thereabouts 🙂
You did say you've been model building for about 6 years? I might have mixed up your comment with someone else. It's my age! Lol

Danny Ray autor
Can somebody take away my credit card please? I just saw a Takom 1:35 panzer III Ausf.M mit schurzen (armour skirts) on Temu and it was only £15. God knows where I'm gonna put these models once they're built? I'll need at least 3 more houses. Maybe I can build a few model blocks of flats? 😂

While I'm here, do any of you use those PE bending tools to help you? Some are like metal rulers with lots of different shapes to bend around. Another type is a square with another square with shapes cut out and there's a screw down clamp to securely fix the part down when bending. I can get one of each type for around £7 with my current discount . Are they worthwhile or just a gimmick?

On a similar note, I wish I could find a solution to my many different diameter circle masks. Being primarily interested in AFV builds, I find I need (especially if the road wheels are rubber edged and therefore painted in black(ish), I know you can buy specific wheel masks for many kits but they're not cheap. I was wondering if there's a good universal solution. A tool or technique where you can make your own masks or stencils. Bearing in mind, I have the abilities of a not particularly bright or gifted toddler 😂😂😂

Clair Greenwood
I use a Bug from the Small Shop and it's simply a must have to get great folds on the first try. Each bend at the same spot makes brass weaker. So yes, definitely get a screw down type.

As for question 2 >>> Tadah!!!!! scalehobbyist.com/ca..00000048/product.php

I bought one, seems nice quality but haven't needed to actually use it yet.

Danny Ray autor
Thanks Clair. You the man. As they say. Funny to think I thought you might've been the (wo)man before you educated me about the different spellings of your name! 🙂 then again (I'm assuming here yet again) you Americans do love to change the spelling of the mother tongue! lol 😂😂😂😁😁
But seriously, thanks for the reply and advice. It does make it feel like I'm not in this arms race against 1940's nazism alone. Even though I'm building German tanks 😁😊
You've convinced me. I'm gonna buy a screw down clamp thing. I mean, for equivalent of ten US dollars, you can't really go wrong?

Danny Ray autor
I wonder if that stencil you linked would cover the British tanks too? I see that panzer iv is mentioned. I have all the British tanks to build. Churchill, Cromwell, valentine, crusader, Matilda as well as the Brit versions of American tanks like Grants, Lees, Stuart's, and shermans ? I guess it'd be expecting a bit too much to have a single stencil to cover all German, American and Brit machines? 🙂

Robert H.
@Danny, I have this USTAR UA-80026, covers all wheel diameters, at least I didn't have one where it didn't fit in scale 1/35. For bending PE parts just a small tool which is usually sufficient for what I need it [img1] [img2]

Danny Ray autor
Thanks Robert. I've just bought something similar on temu and a square one that you can screw down. Because I've been buying a lot of kits from them I had some discount. The screw down type was originally £20. I got it for £6. Hopefully it'll be decent quality. I'll have a look at the wheel mask. As well as the one Clair suggested. Thanks to you both.

Ben M
Helpful tips abound here. Sorry I missed it til now. Photo 5 looks nicely done. I apply superglue with a sewing needle with the end of the eye cut off like a tiny little U. When it gets gummed up I burn the glue off with a lighter. In my late 50's as well.

My girlfriend builds models as well but isn't on scalemates. I like to build things with my kids also.

Clair Greenwood
Gee Ben, that's a really smart idea there with the needle. I like the ingenuity bud 🙂

Danny Ray autor
Hi Ben. I forgot that I bought this little tool from Temu. It's a very fine needle on a small spring and it unscrews from the handle where it's safely stored away. Basically you just dip it in the super glue then dot it where you want it. When it first arrived a couple of months ago I was disappointed but it really has helped. Though I obviously had to remember I had it first! lol
So your whole family model build? That's great 🙂

Danny Ray autor
@clair shall I post a link to the needle tool I bought? It's just a small bullet looking piece of metal that unscrews then you screw it in the other end. It's just a really fine needle on a small limited movement spring like joint. A lot more handy than I first thought! Bear with me I'm not good with computers/phones. I've added a picture of the tool in the project/build photos. See it? They sell them on Amazon too but it was half that price on temu.

Clair Greenwood
Actually Danny yeah I'll grab me a few next week when I get my ssi in.Thanks man I'd like to give that a shot, looks very useful.

Danny Ray autor
You're very welcome amigo

Danny Ray autor
I'm embarrassed to post any more pics of the build. It looks like an explosion in a Humbrol liquid poly and Tamiya extra thin plant as an Airfix lorry carrying T34-85 112 Factory production 1:35 kits was passing….😳

Don't think I'm ever gonna get a call from Industrial Light and Magic with a job offer. 😂

Clair Greenwood
Naw buddy, Im sure it's nothing some putty wont take care of, nothing else use tarps and mud to cover bad spots. Perhaps it's a battle damaged 34 getting hauled back for repairs... 🙂

Jakko ‌
Everybody started somewhere, and nobody built award-winning models when they were just starting out.

Also, you'll be amazed what a coat of paint while hide, never mind the suggestions above 🙂

Danny Ray autor
I think it's because I'm thinking I can put every part in place then use extra thin. I used to apply glue BEFORE placing the part as a kid. Do you glue before for some parts and only glue while in place if you can do that from the unseen side as it were? Like inside a tank for example and the part being on the outside. Also Like the seams of the hull for example?

I am still enjoying building but I seem to be very slow. I just cut a few parts from the tree, sand them down then add a few then stop. I rarely sit for hours at a time. Just half hour here and there while tv is on. 🙂

These 65 kits (yes 65 now but definitely stopped buying. For now 😂 ) are gonna take a loooooong time! 😳😂😂😂

Danny Ray autor
One more quick question. After handling the model for weeks, it's obviously covered in grease from your hands, do you wash the model before spraying? Like wipe with a little soapy water? It's gotta help the painting, no?

Jakko ‌
I glue some parts by putting glue on first, others by putting the part in place and then flowing glue into the seam. It largely depends on whether I think it will stay put ot not without glue 🙂

As for washing it: if the first coat is going to be paint that is alcohol-based, a lacquer, an enamel, or anything else with a solvent in it stronger than water, there's almost certainly no need to wash off grease etc. Which is to say: I can't remember ever doing it, and the only paints that have given me trouble on bare plastic have been water-based acrylics, especially airbrush-ready ones.

Clair Greenwood
Like Jakko, it just depends for me on the particular part and how it positions before I even decide which glue to use.

For the wash I absolutely give a nice warm bath with Dawn dish soap to my parts before painting, Im a sweat hog so my hands get all kinds of sweat on the parts, probably a bit of tobacco breath too so they get a nice wash n dry, then paint away with usually acrylics.

Danny Ray autor
To be honest Jakko, I only have acrylic paints, even the primers I have are acrylic so I'll probably do the same as Clair and give this one a bath. I didn't with my first 1:35 build a Tamiya Panther (I should add some pics but it's awaiting its 2nd coat of gelbraun and the olivgrun and rotbrun too) and it looked like it might've struggled to stick in a couple of small areas due to what was probably greasy fingers. I did buy some latex finger glove things. But they'll take about an hour to put on! Each finger. 😳😂

Dave Flitton
Watching!

Martyn Fox
This looks interesting.Very detailed cockpit.

Bernhard Schrock
Kent: it is a great pleasure to see yours skills and attention to detail!

Spanjaard
that cockpit is a true work of art.... i would love to see the final model 🙂

Mike Thomas
I consider myself lucky to get the headlights on a 1/16 car looking good. This is incredible stuff, Kent.

Bryn Crandell
WOW! Great detail that provides inspiration for those of us that haven't stepped into the deep end yet. Looking forward to what's next.

Bart Goesaert
I don't know how you do that every time, but it always seems like you are able to shrink the real model... outstanding work so far...

Holger Kranich
Fantastic Kent, this is really fantastic! Your detailing is jaw dropping!

gorby
Simply stunning!

Edwin 010
Awesome! 👍

Stefan Fraundorfer
Wow the cockpit is fantastic.

Gary Brantley
Amazing cockpit Kent! Two thumbs up for sure. 🙂

Stephan Ryll
Great detailed work 👍

Kent Karlsen autor
Thank you, not much of it will be visible after I've closed it up...

Ed Froix
My hero..... LOL

Alexander Grivonev
wow, this is serious business

Christian Ristits
You are a master Kent!

Stefan Schacht
Hallo Kent, great start. Count me in. Cheers Stefan

Dale Marston
Beautiful model.

gorby
Utterly stunning work Kent! I could easily believe that photo 40 is the real beast.

Gary Brantley
Too right! That photo is tremendously realistic! Well done Kent! 👍

Bart Goesaert
superbly done...

Alexander Grivonev
Unreal

Spanjaard
a realy work of art and inspiration for all of use. well done!

Rui S
All round impressive work, Kent.
Respect 👍

Spanjaard
and now with the figures it is even better... fantastic!!

Jeff H
Beautiful build.

Neuling
Amazing detail work and scenery. A joy to watch this dio!

Kent Karlsen autor
Thank you!

Rob Nieuwenhoven
Very nice indeed!

Erik Leijdens
Extremely nice dio! Looks real

Michael Hickey
What a fantastic looking dio, top job.👍👍👍

Timmie
great looking dio.

David Andrs
👍

coporado
Wow great dio! A bit of a pitty all those nice crafted details are hidden behind the walls, thanks for sharing that pics!

Michael Kohl
Massive

Mr James
Glorious detail

Ed Froix
Great Dio!

gorby
Beautiful job!

Neuling
Very good work indeed!

Villiers de Vos
The paint scheme is perfect.

Lebloge
Superb !

Alec K
Nicely done 👍

Rui S
Very nice work 👍

Mark K
Beautiful, and an unusual subject!

Villiers de Vos
A beautiful result.

Robert Podkoński
Beautiful indeed!

Villiers de Vos
Very nice work.

Robert Podkoński
Fantastic Wyvern!

Rui S autor
I've some Miniart dios in stash, so I decided to do something diferent for me.

Villiers de Vos
I am booking my seat in the front row and will be following your progress.

René (Lord Bilbo) Bartholemy
Same here. Front seat.

Rui S autor
Thank you for your vote of confidence and encouragement mates.
I Apreciate it and i hope I will not disappoint you.

Michael Osadciw
Me too. I have two of these MiniArt building kits in the stash for two different dios. I'm looking forward to your progress.

Mike Kryza
Hi Rui, I'm in!

Bruce Huxtable
Hi Rui, if you were to press this wall face down into something like Plasticine, and then pour the plaster onto the Plasticine, that might give you a crisper copy. Good luck with your experiments - I'm watching with interest (as these kits are not cheap....) 🙂

Rui S autor
Thank you for your vote of confidence and encouragement. I'm very pleased to have you on board mates. Now I'm feeling the pressure growing 🙂
@ Bruce, Thank you for your tip. Yes, It seems quite easier to do it Plasticine. I don't have any at the moment but...🤔
I also decided to duplicate the plastic windows in wood. So I've always other alternate molds up to scale.
I will try to make some scaled bricks in modeling paste, and other stuff to improve the overall detail.
I'm hoping to enjoy the work on this little scene.
Let's see how it's going to workout 😎

René (Lord Bilbo) Bartholemy
Hi guys, pouring plaster in plasticine will soften the plasticine considerably (tried it), leaving you with a very difficult to clean plaster positive. I talked already of the Silicone & Cornstarch technique in another post. Here's a link to a YT clip: Youtube Video (as ever, the music sucks!) to show how easy this solution can be.
Hope to be of service... 😉

Rui S autor
Thank you for your heads up and video, René.
It sure makes things easier to understand.

gorby
Interesting. No doubt this will be transformed into something special.

Bruce Huxtable
Great tip, René. Looks easy so will give that a try myself too ?

Rui S autor
@ gorbygould, Thank you Mate. Apreciated.
I'm Hopping to do something about it, but I don't know how special it wil be 😄 😄 😄

Kerry COX
The masters machinations. !
Make room for me on your brick fence there Rui. ! 🙂 👍

Rui S autor
You know I'm always proud to get a master on board. So you know you are always most welcome, Kezza. The pressure is on, hehehe

Rui S autor
Here is the reason why i will never be able to make a weekend model, at least with these old kits 😉

gorby
Good grief, that little bike model has more parts than some aircraft kits I've done.
It's looking good so far and I'm interested to see how this develops.

Bruce Huxtable
Watching and learning 🙂

Rui S autor
Thank you for your kind words mates, apreciated.
@Gorby, this is an old kit and could be more detailed. I hope you will like what I'm planing 😉
@Bruce, you're welcome. I hope it can help in someway, because you have more experience than me in Miniart dio kits 😉

Bruce Huxtable
I have a few motorcycles and bicycles in my stash, that I have put off attempting, as they have PE and tiny parts. Your added extras are encouraging me to make a start (when I am next in UK, and can get near my stash!)

Rui S autor
This one, unfortunatly dosen't have PE spokes on the weels 🙁
Looking forward to see your next builds.

Bruce Huxtable
Me too, Rui! I have been away for eight weeks, and don't yet know when I will be home again. I'm suffering withdrawal symptoms....

Rui S autor
😄

Villiers de Vos
Rui, a beautiful build and impressive attention to detail.

Rui S autor
Thank you for stoping by Villiers de Vos, I apreciate your comment 👍
I've finished the build and starting the paint work on the bike. More photos to follow 😉

Jean-Michel Tilquin
Nice work as ever so far Rui. Waiting for more!

Rui S autor
Well come abord and thank you for your comment Jean-Michel Tilquin.
"Your order is my command" 😉 🤔 😄

Kerry COX
Simply outstanding Rui. 👍 👍 👍
I am wondering about the crease in the drivers and pillions saddles, if that was hollow or left as you have it there. ?

Rui S autor
Hi, Kezza. Nice of you to stop by and leave your kind and wise words. Always very much apreciated.
If I get you right, you are speaking about the holes in the seats?
That completely scaped my attention. I have to study that issue... Thx again

Simon Nagorsnik
It will be getting a nice dio, i think!
Good detailed bike- good job on an old kit👍

Kerry COX
Rui. I just did a Google search for BMW seats for WWII army type M/Cycles. And it looks like you have it right. The seat has no slots or open cavities. 😉

Rui S autor
@Simon, thx a lot for commenting with encouraging words. I appreciate it.
@ Kezza It looks YOU are right Mate. I've looked at my research material and it seems they are mostly flat. I've seen one or two that have a slight depression on the front seat, but nothing so deep like in the kit.
Now I will have to further detail the seats 😄

Rui S autor
Kezza, I've Uploaded two photos 😎 second bike on the Left in the first photo.
In the second the front seat, apear to have 3 recess 😎

Kerry COX
Good spotting Rui. I wasn't being a smart ass. I genuinely wondered if they had the hole there for letting water drain away rather than pool, or cause a wet bum if you were not paying attention before you threw your leg over in a bit of a hurry to get away. (Just a thought mate. 😉)

Rui S autor
Of course you weren't Mate, you never where a smart ass, I'm sure you don't intend to start now 😄 More so, because what you say makes total sense. We motorcyclistes know how bad it is when water arrives to your Balls 😄 but normaly this guys use rubber suites on the winter.
I thank your insight and headsup. I've decided to change only the back seat and i've done it already 😉

Kerry COX
LOL. 🙂 I was only trying to be logical Rui. 😉
I am really looking forward to the progress images, as the final result will look so real, it will have us all opening our doors to let the engine fumes out. !!!! 👍 hehehehehe

Rui S autor
😄 Me too Mate 😄
Thanks for your encouraging words. I hope I don't disappoint your expectations.

Villiers de Vos
Very nice Rui, especially all the small details that you have added.

Rui S autor
Thank you for your suporting words Villiers de Vos. Apreciated.
I didn't go the extra mile, but there is always space to further detailling 😉

Villiers de Vos
Rui, very nicely done.

Bruce Huxtable
Liking the realism all the extra wiring, etc brings 👍 Is that an ignition key too ?!!

Jim Bob McCabe
That motorbike combo looks great, Rui; i hope you don't mind but i am going to copy your ideas as i have one of those combos waiting to be built and detailed.

Rui S autor
Thank you mates, for stopping by and comment this album. A good motivation.
@ Villiers, Glad you are following, and like it, so far 😉
@ Bruce, when you pick an old kit you know you will have extra work to do, but I'm not going the extra mile because this is tiny (for me ofcourse). That piece it is not the key. I think, it is for tighten / loosen / lock ? the steering shaft? 🤔
@ Jim, Welcome abord, Be my guest. I'm flatered, you are more than welcome 😄

James C
I'm not much of a fan of motorcycles in general, but your detailing and attention to detail with this build is fantastic 👍

Kerry COX
What ever the season you choose Rui. I am sure you will do it justice my friend. 👍 👍 👍 🙂

Simon Nagorsnik
a good job with the bike!
I also think that it still needs some dust and also on the floor of the sidecar

Teeage
Nice job, again, Rui 💪🏼

Olivier
The R75 was produced between 1941 and 1944.

Rui S autor
Thank you for your comments mates.
@James, In the past I've done a Tamiya ketenkraft, 9 SS Panzerdivision | Album by mig (1:35)
and I always look at it and think, "why didn't you made the cables??? 🙁" So this time I was more comitted.
@ Kezza, well this time I'm going for a dry season 😉 apreciate your encourgement

Rui S autor
@ Simon, thank you for stopping by and comment. I'm going to try a soft urban dust weathering
@ Tini, I'm really glad you also like this litle thing.thanks a lot
@Olivier, Thanks a lot for your headsup. Apreciated mate.
I was so engrossed in building the bike that I didn't even go to see its production story. I already had a Dio in mind and now I have to change all the plans. I saw so many images of motorcycles invading Poland in 1939, that I was going for that. As you can see, I'm already thinking about the alternative, same context, same unit, but later in the war, 21/11/1941 – 27/11/1941.

Olivier
Sounds good to me.

Rui S autor
Thanks Olivier I'm glad you concor 😉.
I'm going to extend the time frame a little from 04/10/1941 – 27/11/1941, so there are no more inconsistencies 😄

Bobby Thumbs
The bike is awesome rui

Rui S autor
Thank you very much Bobby, I realy like it very much too and I'm not trying to be cocky. What I mean, is that I'm very happy with the result so far 🙂

Kerry COX
When your work is constantly of such high quality Rui. You can afford to be cocky mate. 👍 👍 👍 😉

Rui S autor
Hi Kezza, I know to well my limitations, so I prefer to be humble, (and believe me that's not false modesty) even more so, when I see the top modeling level here in scalemates. 🙂

Daniel Klink
Truly a fantastic result mate👏👏👏👏👍

Rui S autor
Well Daniel, Thank you so much for your kind comment Mate. It means a lot to me, comming from a top modeler like you.

Kerry COX
Well said my friend. 👍 😉

Rui S autor
Thx Mate. Glad you agree Kezza 👍

Artur Z.
Hi Rui, it's looks like next exellent work 🙂. I will wait for final result.

Rui S autor
Thank you, for your vote of cofidence, Artur. Apreciated.
After aborting the 1939 Poland dio project, I've to redirect the all thing. But I've a plan B in mind.

Mathias Decommere
Nice motorcycle-paintjob!

Villiers de Vos
Rui, this is pure eye candy.

Rui S autor
Thank you Mathias and Villiers de Vos, I'm very glad you like this one. A long way too go, but I'm very proud it took your attention.

Jac Fleming
I love the pose of the bike, I wouldn't change anything. The road and building are super objects by their simplicity

Rui S autor
Thank you Jack. Nice of you to stop by and coment this one, Apreciated.
I see what you mean but I want to make an efort to do this dio more real, like I always try, and so y see that I still have lot's of work to do. 😉
P.S. Owh, and the Rommel unfinished figure, is just a touch for scale purpose.

Rui S autor
Some update photos, of the third kit for the dio.
My first Alan/Dragon Kit (definitely not for beginners).
Scratch on Zis truck, started 🙂

gorby
That does look like a very challenging kit. Fortunately your skills can easily master it.

Rui S autor
Thank you for your kind words Mate.
Well, the kit is bad enough yep, but I'm challenging my scratch build with it, so I'm hoping to make something interesting out of it with spares and trash that I've accumulated in the man cave 😉

Rui S autor
This is the state that the transformation from Zis 5 (Zavod imeni Stalina 5) to PMZ-1 (Zis-11) special chassis developed for the fire departmant, is currently in.

It's a Autopump on a Amo-4 (Awtomobilnoje Moskowskoje Obschtschestvo-4) chassis, from Miusskaya fire engines plant almost in the center of Moscow.

PMZ-1 also (ПМЗ-1) or (ЗИС-11) is the first model of this plant, realeased in 1934. This fire truck had a engine power of 55kW, a load capacity of 3 tons, was designed for 12 people, equiped with a centrifugal pump that suplied 1340l/min, and a tank for 360 liters of water to extinguish fire.

Villiers de Vos
Simply, outstanding work Rui.

Rui S autor
Thank you very much for stopping by and comment, Villiers de Vos. You are to kind Mate. But yeah, I'm enjoying it a lot.

miloss
Very nice and detailed build, thank you for very helpful photos and comments. Can you suggest me, please, some good source to learn how (from which point to where) to draw cables in German BMW and Zundapp bikes, please? Your pictures are detailed, but sometimes I´m not sure, which cable is it, in other picture.
Thank you very much.

Rui S autor
Thank you miloss for your words.
Well, my album is certainly not the best place to understand how to put wires and cables in the BMW.
I did my wiring by looking at a lot of images of this motorcycle available on the internet and also some knowledge acquired since I was little because I have always ridden motorcycles.
I'm not an expert or rivet counter but I can say that there are always n cables, some electrical and others steel, that connect, for example, the levers to the brake hub on the front wheel and to the clutch. then there's the accelerator that goes to the carbs, there's also the speedometer cable that goes from the front wheel to the dial.
Then do we have electrical cables that go for example from the spark plugs on the pistons to the alternator? and all the lighting cables coming out of the battery, to the front and rear lights, etc.
So if you want to get it perfect what I can advise is a lot of research on the net maybee try to find the diagrams of the complex electric systems and also on YouTube, there are lots of this bikes with lot's of fan's still nowadays, so you will find What you're looking for. I hope this helps, a bit 😉

miloss
Hi Rui,
thank you very much for your answer. I´d like to accentuate, that your amount of pictures, done during building of models is not usual in positive meaning of words, and so I´m really grateful for it. My intention was not to diminish your effort, only to point to my lack of knowledge and ability to fully use them for my own education. And yes, my question is a part of my searching on internet for good source of information. Different of you , although I´m not a young boy already, I´ve never ridden a motorbike. Actually I started to like motorbikes (old veterans I mean) only since my , let´s say, upper age. 😮 🙂 So I have to learn a lot. I love books, but they can be expensive and to buy something and then realize it was not worth money is not optimal way of learning ... but it´s also learning, isn´t it? 🙂
Thank you very much, have a nice day!

Rui S autor
Hi miloss,
Thx again. I didn't understand your comment as derogatory, quite the opposite.
I appreciate the same and apologize if my answer or English words chosen were or sound arrogant, as that was clearly not my intention so i'm hoping no harm done.
I understand What you mean and I'm sending you a private message so I can try to help a little more and talk about the matter at hand 😉

miloss
Hi Rui,
thank you very much! No harm was dome, don´t worry! I´m also not very clever speaker in English, it´s much better in Slovak, I think. 🙂 The way of thinking and speaking in my language is different comparing to English - there are some cultural differences, what´s OK, but can cause difference in what wanted to be told and what was told. 🙂Thatś why I´m not always sure, how my questions sounds to other people. And I don´t want to be rude (without reason). 🙂
Thakk you very much for your PM.
Keep well!
Miloš

Rui S autor
Hi miloss,
Ok, nice, for me would be better in Portuguese 😄 otherwise misunderstanding can always happen, and hey, you're younger than me 😉
Cheers.

gorby
If the main language of Scalemates was Portuguese, Slovak etc. I wouldn't have a clue what was going on. Everyone on here who speaks English as a second language deserves respect from those of us who use it as our native tongue. In fact, it's often embarrassing when many of you write English far better than many of the English.
Rui: your scratch building on the truck is excellent. I love the way you made the back fenders/mudguards.

miloss
Hi guys,
yes,you are right. You know, I´m greenhorn.🙂🙂🙂
Cheers!

miloss
Hi gorby,
let me ask you, please:I see that you started Panzer Soldiers Set 1. Are you able to remove molding lines of miniatures and do not destroy all details around, please? Because I´m not. So I would really appreciate some advice, how to do it. I tried thin cement, to freeze it and use low temperature, to use acetone, and, of course, sand paper, scalpel and razor blade. Razor blade works, but it´s too big to use it in area around delicate details.
Thank you very much.
Cheers!

Rui S autor
@ gorby, thank you for your words and understanding. One thing I'm sure, my English is rough and I wish I had your sense of humor, or at least be able to transmite mine in English as perfect as you do with your 's in all your álbums, like the introduction words of your panther 1/48 project.
Let me introduce you to my first and ONLY attempt to model a tank with a full interior. | Album by gorby (1:48)
Outstanding. I always laugh and enjoy reading your comments.
As to the fenders I think we both have that improvisation in common, right? So Thx again.

@ Miloss, I think you should ask gorby about his project's on his albums. Please don't get me wrong. I don't mind you doing it here, but I thing it's fare enough if you you do it in Gorby albums, they surely deserve it.
Btw I never was able to remove 1/72 figures seam lines
So thank you both.

gorby
Hi Miloss, the Panzer soldiers set is my first experience of Orion figures and I was quite impressed with them, they are the best 1/72 figures I've tried. Mine only had a faint seam line on most of them although there was a few which needed trimming. I found a sharp scalpel used with a sawing action worked well enough and then, if that left a rough patch I used Tamiya Extra Thin. Do you know that you should prime the figures before painting with diluted PVA glue? I used plastic primer on top of that as well. I hope that helps.
Thanks you for your kind words Rui. It's particularly pleasing as I had to re-learn to speak and write after a stroke 18 years ago.
Isn't Scalemates a lovely place? 🙂

miloss
Hi guis, thank you very much for your answers and sorry for my question placed on not correct place. I'm really not a fan of social medias and my knoleadge of the manners there are really poor. I felt the post similar to Room of discussing people and I wanted to use opportunity to ask someone who is present there.But you are right, no doubts, and I know how to do it correctly, next time. 😁🤔👍 Thanks.
Cheers!

P S.: I tried Extra Thin glue and scalpel, but with poor success. But I didn't know anything about diluted PVA. Thanks!

Rui S autor
@Gorby, I'm sorry to know about your misfortune but very Glad that you recover very well from that stroke Mate.
I'm 100% with you, scalemates it's a lovely place 👍
So Keep safe.
@Miloss, I'm sure, no harm done. 🙂
Cheers

Neil Patrick
Great craftsmanship Rui. Two major projects in one build! The Zundapp looks wonderful and I am sure the ZIS will too very soon. Looking forward to seeing the next steps.

Rui S autor
@Neil thank you very much for your kind words and for stopping by and comment. Yah I'm back from holidays and I've to restart working on this project. It will be a long one as all my other work but hopefully I will manage to do something that will make me proud.
P.s. it's a BMW 😉

Thank you Tom Harris (MHBeergeek) for the 53 like. Much Apreciated

Neil Patrick
You're welcome Rui. Duh, How did I make that mistake? I think I was probably just too distracted by the fine detailing! 🙂

Rui S autor
Thank you very much Neil.
No harm done 😄 on the contrary.

Thank you tom svk-atfor the 54 like. Much Apreciated

Rui S autor
Thank you Jac Fleming for another 54 like on this album. And Hang Li fot the 55...or should I say the 56 🤔
Much Apreciated

Simon Nagorsnik
Fantastic scratch build elements!
Really like them, they´re looking great 👍
I'm already curious how it will look finished.

Pietro De Angelis
Remarkable work,
congratulations for the detail work on the vehicles.

John
Is that a water pump in the back of the ZiS? Amazing level of detail and scratchbuilding Rui!

Villiers de Vos
Over the top scratch building skills.

James C
Coming along nicely Rui 👍

Kerry COX
Will this give us frost bite Rui. ? 😉
I can imagine all kinds of scenarios and blood in the snow is one of them, if a field ambulance is required. 👍
What are you using for the bolts that will be holding all your timber add on's. ?
Brass pin nails like the naval modellers use for their planking are good. :-/
Love your work mate. 'No covid blues here' obviously. 🙂 👍
Cheerz .😉

Rui S autor
@Simon, thank you for your comment and vote of confidence. I'm also very curious how it will end 😉
@Pietro, thank you for stopping by and your kind words. Appreciated.
@John, thank you very much, I can say that you nailed it.
@Villiers, you are to kind Mate. Thank you.
@James thx Mate .I'm really glad you like it.
@Kezza, my friend, thank you for stopping by and comment. I'm really glad to hear from you Mate. Hope everything is good now.
Well, I'm trying to keep some secret about this one, but I can say that, yes it will have blood (but not on the snow), and that John as raised the tip of the veil 😉 😄
You know I'm not a rivet counter, so I think this will not need any visible bolts.

I also would like to thank all the 60 mates that pressed the like in this one and also on my other albums. Appreciated

Kerry COX
Sweet as mate. !! 🙂 (y_

Rui S autor
Start working again on this project, and the mojo comeback 🙂
Also thanks for the new likes. (thx to all 63 mates).

Villiers de Vos
Rui, it simply stated work of the highest standard. I am glad you have your mojo back.
What is the kind of tape that you used to make the hoses please?

Rui S autor
Hi Villiers, thank you for your kind words Mate. I've used it before in my project
Outono / Autumn 1944 | Album by mig (1:35)
To simulate zimmerit.
It is used by wall painters when they have to mask out circled areas. it allows you to extend (straighten) one side while keeping the other side short and rough.
And yes, I'm such a slow modeler that I also really enjoy when I'm motivated.

@ ribellinu, Thank you for the 64 like. Appreciated

Villiers de Vos
Thanks Rui. I agree with your feelings.

Rui S autor
Starting the bodywork, paintjob. Complitely noob on shiny paint work... The only gloss kit I have is a 1/72 Kubelwagen from centurys ago when I only had some clossy paints and brushes.
Some dry fiting test also.
Getting ready for the marriage.
@ Villiers de Vos 👍
@ DaveTheGun, Thank you for the 65 like. Appreciated

Kyle DeHart
Very cool!

Rui S autor
Thank you Kyle, I'm glad you like it and comment. Apreciated
Also, thank you and to David (DaveTheGun), and Robert Hessler (RobCol)
for the 3 new likes, 68.

Kyle DeHart
I do like it. Most impressive!!

Mathias Decommere
Your building proces is really mind blowing... Perfection in the smallest detail.

Villiers de Vos
Phenomenal.

Rui S autor
@ Kyle thx again, you are to kind.
@ Mathias, thank you very much for your kind comment. Don't we all seek that impossible aim 😄. ? Much appreciated comment.
@ Villiers de Vos, thx for your support & motivating comments Mate, you are so kind.

And thank, Viacheslav (touristTula) & Dmitry Melnikov (Ditrich) for the 2 new likes, 70.

Riho Sakrits
Will be watching that project!
Boa Sorte!

James C
Looks to be progressing nicely Rui 👍

Rui S autor
@ Riho, Thank you for your interest and comment. I hope you will find this interesting till the end. Obrigado 😄
@ James, Thank you for your comment. Apreciated. My redemption from ZIS - 11 or PMZ - 1, is nearing completion.
And thank you Dmitry Melnikov (Ditrich); Raditz; Neil (djferrisbueller) and Mark K (Ladislas) for the new Likes. (74).
I've uploaded some more scratch detail work on the kit. I Hope you find it interesting, I sure enjoyed doing it a lot.

Villiers de Vos
Very nice work so far. It is a joy studying the small details in each photograph.

Kerry COX
As always. It's a trip back in time and a great rendition of that moment in time. Then, there is the detail. Thanks for the pleasure you give us all when admiring your skills.
None better. 👍 🙂

Rui S autor
@ Villiers de Vos, thank you for your kind comment and continuous suport, very apreciated. I'm really glad you like the detailing.

@ Kezza, thank you my friend. you are without a doubt one of my main mentors here. It was with you and through your albums that I learned a lot, and I even tried to use your sharing methods in my Albums. It is fair and deserves my respect and public recognition for what I am saying. I am far from reaching your heels but your support from the beginning was one of the reasons that led me to try to do more and better. so thanks for your support. for me it means a lot and I am always proud of your comments. Thank you for your unconditional friendship, without it I would not be what I am in scalemates.
P.S. if I'm something at all. One thing I'm sure, I'm for ever grateful to you.

Rui S autor
Now lifting one more edge of the veil, reveling a little more about this project, I leave you with Sturmbannführer Kurt Meyer (nicknamed "Steel Fist") , commander of the motorized reconnaissance battalion "SS Leibstandarte" memories, about that noon on Wednesday, October 8, 1941:

(...)- My armored car drove into a round city square. Trams were moving in our direction, and trucks, horse-drawn carts and hundreds of people were spinning around. My armored car almost ran into a fire truck, the driver of which stopped in confusion. The second armored vehicle, which was following mine, suddenly opened up with a whole hail of fragmentation shells, and the fire truck, frozen in front of me, was literally torn in half!
Next, the machine guns of our motorcyclists rumbled, echoing with an eerie echo somewhere in the courtyards of the houses surrounding us. (...)

Robert Podkoński
Your skills and perseverance are simply impressive, Rui. Keep it up!

Rui S autor
Thank you very much for your comment and encouragement Robert, much appreciated.
The clean and shiny version (Diecast type with a little accident) of the fire truck is almost finished.
I just need to take more photos.

Rui S autor
Now I can start to concentrate on the dio and figures.

Kerry COX
As always. Your skills and attention to the details have shon through mate. Well planned and executed. 👍 👍 🙂
What will next year bring I wonder. ? hehehe
More surprises no doubt. 😉
Happy New Years too mate.

Rui S autor
Hi Kezza, thanks for your nice comment. Apreciated.
You Know mate, I realy fell proud doing this original, never saw one built, so... 😉
Anyway, at the start of the new year I want to finish this dio, so let's see how long it will take 😄
Best wishes to you and a Great and Healthy New Year 👍

Villiers de Vos
Rui, outstanding and inspiring. Best wishes for 2023.

Kyle DeHart
Really great Rui!

gorby
WOW! The fire truck is fantastic Rui! Up there with the best modelling I've seen on Scalemates.

Mathias Decommere
Just... Superb!

Rui S autor
@ Villiers, thank you very much for your comment and kind support. Happy 2023, Mate.
@ Kyle, thank you for your comment, glad you like it.
@Gorby, thx a lot for stoping by and comment. You are to kind mate. I know very well your scratch skills and originals, and I also know I'm still some miles away from the best modelling here, but always learning on each project and so, improving.
@ Mathias, thank you very much for your kind comment. Apreciated, and it means a lot.

Thank you also for the new likes and to all, Happy 2023.

Rui S autor
Frankenstein at work. This was easy the poor guy was already dead. Last figure worked out.

John
Nice work Dr. Frankenstein! Very realistic pose of an unfortunate participant.

Rui S autor
Thx a lot John. Apreciated.
Yap, obviously some work still to be done, but I'm also quite happy with the pose.

Rui S autor
Started the new challenge. Making a good interesting scratched base.
For those interested in this historic events or If someone wants to know more about this episode, you can translate from this interesting UKRAINE site:

dniprovsky-project.b..om/2021/07/1941.html

It also has a video, but unfortunately without subtitle's.

Villiers de Vos
I am still nailed to my chair. Following each development, big and small with great interest.

Rui S autor
Thank you very much Villiers de Vos, I realy apreciate your resiliance 😄 and the endeless suport. Thx a lot.
I've finished the scratched Tram Pole, it's ready for painting 😉
Another small detail but one less to do in all the scratch work I've been doing in this project.
They sure take double time, old fashion work, from finding the right pieces and work them to a viable result, at least for my hapiness.

Rui S autor
Start the work on the dio base.
I also want to thank all the new likes on this album. Apreciated.

Alec K
Amazing build 👍

James C
That cobble stone road looks fantastic! The manhole cover and tram lines are a nice touch as well 👍

Robert Podkoński
Soo realistic... You're a wizard, Rui!

gorby
The base is stunning! Remarkable.

John
Incredible base Rui! 👍

Mathias Decommere
Just perfect!

Rui S autor
Well mates, I love this hobby yes, but with the kind words of support from such talented friends, I enjoy it even more.
Thank you all, I really fell great with such comments, they help me endure any hardship I encouter. Let's see if I can keep up with the standards.
Thank you also for the new likes.

Pietro De Angelis
Besutiful base!

Kerry COX
Rui. I do hope that all those cobble stones came in a packet mate. But knowing how enthusiastic and fussy you are about your work. I wouldn't be at all surprised if you hand picked them from some construction site. 🙂 🙂 But as always. Your the best. 👍 👍 😉

Neil Patrick
Just catching up with your amazing project Rui. Quite apart from the fantastic modelling, it was great to see the photos from this event all in one place. I think most of us have seen some of them before, but the books I have seen them in do not give much context or info about the actual events they depict.. Your extra research makes the whole project historically fascinating too. Great work!

Tierra del Fuego Alejandro
1. in my little opinion, as a rule, there is always a puddle from the inner thread of the rail of the tramway, or it dries up or has just formed 2. too clean street too clean path. although I myself love cleanliness, it's hard to achieve cleanliness on the street for a number of reasons independent of each other

Rui S autor
Some progress done, I've start painting figures and weathering the tram pole, truck, and a bit more on the bike.
@ Pietro, Thank you, glad you like the base. Still work to be done but I'm happy the way its going,
@Kezza, Thx Mate. The cobble stones had already appeared in this album (photo 18). They came from a beach in Algarve.
@Neil, Thx mate. Yap this events are very well documented, as i discovered with the progress in my research.
I also would like to thank Austin Steenkamp; Lothar29 and all the new mates that pressed the like botton. Apreciated.
Still a lot of work to finish the dio, but I've now a glyinps of the final result.

Pepe
😲😍

Mathias Decommere
It sure will be a beauty!

Robert Podkoński
Faces are just perfect, Rui (as everything else 😉 )

Guy Rump
Looking better and better. 👍

Shar Dipree
Great work and a phantastic overall impression. 👍 👍 👍

Villiers de Vos
The motorbike and crew is a beautiful little gem. The wear and tear on the backrest of the sidecar is a nice touch.

Olivier
I fully agree with Villiers. Your motorcycle crew look almost real.

Pietro De Angelis
Amazing crew and motorbike Rui!
I'm so sorry, from the bottom of my miserable modeling and cultural historical skills I would never allow myself to give advice but if the scene is set in Mariupol during the Battle of the Sea of ​​Azov in 1941 the BMW R75 if I'm not mistaken was not yet available for the German Army, the model available at the time was the R12.
Anyway great work, congrats!

James C
Those figures look fantastic. Awesome job on the paintwork! 👍

Rui S autor
@Pepe, thx
@Mathias, thank you for your support, I hope you are right.
@Robert, thanks for your kind comment. I was nicely surprised on how fast they got into this result. I think they are well sculpt and has they say, when you have that one's "they paint themselves easily"?
@Guy, I'm glad you think so. Thank you for that
@Shar, welcome and thank you for your comment and like. I'm also hoping in the end, to have that nice overall impression to be satisfied with all the effort applied on it.
@Villiers de Vos, what to say to your always motivating comments, thx a lot? I'm glad you noticed that soft weathering too. Apreciated
@Pietro, thank you. I'm pleased you like the R75 and crew. Has to the historical accuracy I will respond next.
@James, your comment is always very apreciated. I know and recognize the high quality of your work, so it's most rewarding to see you stopping by. Thx

Rui S autor
Now Pietro, you probably right, that it should be a R12, but has you can see the matter was already discussed up in this album with Oliver early in 23 November 2021.
When I started the BMW I only had the idea of making something different from what I had been doing, than I thought about Poland invasion but that was a blunder has Oliver pointed out. So I changed plans and look for a date when the BMW was already running. And 1941 was the beginning of that.
In BMW Group Archive, I found that:

In 1941 the production of civilian motorcycles was stopped. Germany was at war and production was adjusted to the needs of the Wehrmacht. BMW motorcycles have always been popular with authorities - and thus also with the military. Single-cylinder models were used as light courier and training machines, and the R 12 was delivered to the Wehrmacht as a side car.
However, the war policy of the Germans required a motorcycle Side car that could be safely mastered on any surface - mud, ice, gravel, desert sand - and that required only little maintenance even at extreme temperatures and heavy loads. In addition, the motorcycle should also be able to cope with longer distances at low marching speeds without any problems.
No German motorcycle manufacturer had such a machine in their range, which is why a special development order was placed with BMW and Zündapp. In the winter of 1938, BMW began work on this project based on the R 71 engine. The beams of the bolted tubular frame were divided. This enabled the engine to be installed and removed quickly, as the lower frame part could simply be folded away. A rear wheel suspension was omitted for better stability. But while the frame proved itself during the test drives, there were thermal problems with the side-controlled motor in off-road use and on longer trips at walking speed. So BMW developed a new engine.
The result was a 750 cc unit with an output of 26 hp at 4000 rpm. The engine developed an enormous torque and, since it had a very low compression ratio of 5.8:1, it could also easily tolerate poor-quality or synthetically produced fuel. In contrast to the R 71 engine, no heat problems occurred during testing, so that the R 75 could go into series production in 1941.

And

Series production of the R 75 begins
date from07.1941.
Description
In July 1941, the first R 75 sidecars rolled off the assembly line in Munich. However, after production was relocated from Munich to Eisenach in June/July 1942, the majority of the R 75 was manufactured in Thuringia. The R 75, with seven forward and two reverse gears and a powered sidecar, was specially developed and produced for the German Wehrmacht.

Rui S autor
So my conscience his ok with using this kit has eventually a single replacement new side car in October, for the first SS division formed based on the Hitler personal bodyguard regiment ( probably with a great influence) in theory it could be possible?. Has said already above in this album I'm not a rivet counter (I can't read the licence plate in one of the reference photos, the one that looks like a Zundapp?...just joking 😉) and my dioramas don't intend to be historically correct they simply aim to be ideas historically based, with lots of the so called "artistic" liberty.
Anyways Thx again for your comments. I apreciate them all.

Pietro De Angelis
👍

Alec K
Awesome progress Rui, I love the expressions on those motorcyclists' faces 👍

Gary Curling
Motorbkes and bikes are fiddly models to do,so well done on this one

Kerry COX
Hi Rui. 🙂 🙂 🙂 I have just finished browsing through you work using the mosaic view and pulling up the ones I saw that showed the detail you included.
It took a LONG time to do as every image had something of interest and wonderment included.
No need to say your attention to detail is superb, as I have said it every time I see your work, especially with the images of the original scenes in black and white you have used to help you define that moment in time.
It takes a while before the smile on my face goes after seeing what you have accomplished.
It really is hard to separate the final results from the images you used as reference material.
That is some skill you have my friend and there is not one build I have seen of yours that one can find any sub standard workmanship.
Your skills and abilities are truly something special mate.
Thank you for all the years of enjoyment and inspiration. 👍
Cheers good buddy. 🙂 👍

Rui S autor
@Alec k, thank you, glad you think so and like them and yes this figures are well sculpted.
@Gary, thank you for stopping by and comment. Apreciated. Not the best motorcycle kit in the market I think but it was a nice kit to build and improve. Thank you for your like too.
@Kezza, my friend, your words put a big smile on my face. Thx a lot Mate, coming from a Master makes me feel very proud. Also Knowing that my work was interesting enough for you to have all that work and time spent looking at it ... Yap makes me feel Great and motivated for doing better every time.
I know I should be more selective in chosing the lot of photos I upload but as I've a lot of work in improving the old models I find difficult not to share that in here, so I end up uploading more than I should, but hey, that's just one of my disabilities.
I really enjoyed reading your comment. Thx again good Yoda 😉

Kerry COX
Hi Rui. 👍 I am pleased to know you 'rescue' some of your builds. 🙂 I have from time to time pulled a few off death row and repatriated them to their former glory. Just as much fun as unpacking them for the first time. 🙂 Right now, I am eying off the Erickson Sky Crane from ICM in 1/35 scale. But I want to do it as the 'Elvis' fire fighter. Bright orange with a huge tank slung under the rotor and engine assy. Almost $300.00 AU. But with the war in Ukraine, it's understandable. Also. I am eagerly awaiting the 1/35 Mi-28 'Havoc' Russian attack helicopter from Meng. The 1/72 scale was a shit model. Happy Easter my friend. BTW. I meant every word about your skills and abilities. You have given me so many ideas and tips without saying a word. 😉

FTilhonLinden
Excellent work! My deepest respect!

Rui S autor
Hi Kezza, I think I didn't express my self correctly as sometimes occour. I meant old kits and not, my old models. That ones I never go back and touch them, not because i don't fell that urge, it's more because they tell the story of my skills at the moment I built them and so I like to see what progress I'm geting from newer experiences. So I let them stay like they where when I finish them. Also, I've so many kits in stash that I prefer to start a new project from scratch. If not I always consider that a model his never completelly finished, so it would be a never ending process arround the same subject, plus you know I'm a very slow modeler. I always have to enjoy one less on the stash.
Anyway, I'm looking forward to see you Back in Action Mate, I missed that for a long time now, so I'm eager to study your new albums. Please, go for it, you know my scale is 1/35; 1/32 right👍
Happy Easter to you too, my friend and thx again for your kind words, they are always most welcome. I'm really happy to know that my work still has some tips for the interested mates, that makes me try harder to work better, (and ofcourse some abuse in uploading it) 😄.
@ FTilhonLinden, Thank you very much for your kind comment. Much apreciated and I'm really glad you like my work here.

Kerry COX
I did misunderstand, but 'no foul' as they say. hehehehe I am looking around for a display case that will take all my 1/32 scale birds and choppers, those being the 'Super Stallion, the Apache, and four Ju-87's and Skyraider, but with the two future additions, I will be pushing for space to put the case too. :-/ Not long now before I have the confidence to tackle an other big project. It's been a while. 😉

Mark Sherwood
That is a very nice BMW Combination, kudos on your figure painting. The dio' looks pretty nifty too.

Mr James
I know its been mentioned by others, but your attention to detail and the documentation of your process, is very impressive Rui. It inspires me to build the R12 in my stash to your standard. I will be referencing your work when the time comes and for that I thank you. I was really impressed by the painting of the bike riders. They wonderfully painted and the expression on their faces you brought out, is superb. The scratch building of the fire truck is a stand out and the cobbled street is beautifully painted. Bloody good work Rui 🙂

Villiers de Vos
As always, phenomenal detail. Master class.

Neuling
Mr James says it all. - To me picture 313 seems to show the completed diorama. More photos would be more than welcome!

Kerry COX
Rui. Your simply, the best. ! Salute. 😉

Kyle DeHart
This has been great following along with. A really stunning result. The attention to detail has been next level across the board.

Jean-Michel Tilquin
It's all been said above... Superbly detailed and the figures are really realistic.
Like Neuling, suggested, more photos with a cleaner background would make your dio more justice! Congrats, Rui!

Lawrence Landis
Your work is phenomenal. Very enlightening.

Kyrylo
This is a very titanic work ... I am delighted with the realization of this idea! You are an incredible cool modelist because this work is truly difficult. I am pleased that you have chosen the subject of Mariupol because it is the city of my student years. Thank you for it! I will look forward to new works!

Walton
Hi guy !! I'm very impressed by your face painting.. It looks sooo human !!!!! 👍👍👍

Villiers de Vos
All the elements are starting to come together. Fantastic.

Mike Kryza
I like the result! Well done!

Rui S autor
As mentioned some time ago, I would like to respond and thank all the last comments that have been posted here, now that I've resumed this project and hadding it to completion.
I intend to emphasize the great appreciation I have for all of them and so, responding to everyone:

@Kerry COX, Kezza my friend, I hope you are well. Thank you very much for your unconditional support, which was one of the reasons why I always continued to work and present my dios here and always try to do my best to reach your level. I look forward to seeing a new project of yours;
@Mark Sherwood, Thanks for stopping by and commenting. I'm so glad you like this dio. The BMW is a really nice kit, although the Italeri always needs some work, but it's worth it IMHO;
@ Mr. James, Thank you very much for your kind and encouraging comment. Appreciated. The details make the difference as they say, so it makes sense to spend time executing them. I highly recommend making a sidecar, as mentioned above, it is a small piece, but in itself it is worth many larger ones. As for the figures, they almost painted themselves, the molds were so good. I'm glad you liked my scratch work too. As for the street, the stones came from a beach in Algarve;
@Villiers de Vos, Thx a lot for your nice comment. Always appreciated;
@Neuling, Thanks for commenting on this work of mine. Photo 313 is just another one of the work in progress. As I love sharing all my work and details here, you already know that my albums have a lot of photos. But yes, I can say that I will be happy to continue presenting more, until the final result, which by the way, is almost arriving;
@Kyle DeHart, Thanks so much for stopping by. I appreciate that you enjoyed the development of this dio. The final result is to be shared soon. I hope you will like it;
@Jean-Michel Tilquin, Thank you, it is a pleasure to read your words here, as I know the quality of your Dios. The photos still represent WIP, but as mentioned above, this work is in its final stages. Stay tuned;
@Lawrence Landis, I'm really glad you like my work so much. Thank you very much for your comment;
@Kyrylo, Thank you. It was really a leap in the dark for me. I always wanted to make a sidecar with every possible detail and the fire truck came along the way and it was really captivating.
Your words are really kind as they reflect all the effort I put into this work. The fact that you are directly involved with this city makes me even happier, as I intend to make this work a tribute, to all the martyrs of the invasions it suffered.
@Walton, Thx for stoping by and comment. Appreciated
@Villiers de Vos, thank you. Yes, as mentioned above this work is in the final stages. New photos are added:

-New fire truck details and weathering, (including battle damage and the flat tire), as well as street weathering.
- Missing the finalization of the figures and the base corner, and the final weathering on the sidecar.

P.S. Hi Mika, I apreciate your comment. Glad you like it. The final result is shortly in sight 😉

Villiers de Vos
Welcome back at your worktable.

Rui S autor
Thank you Villiers de Vos, but I've been at my wortable finishing two "shelf queens" :
- Outono / Autumn 1944_Jagdpanzer Tiger (P) Elefant;
- Esci sdkfz 10/4.
But yes, now finishing this one and thinking wich one I'm going to pick froms stahsh next 🤔

I´ve finished the base corner.

gorby
The base is looking remarkable! 😮

CaptGPF
A little late to the party, but following! That motorbike looks fantastic!

Rui S autor
@ Gorby, Thanks a lot. I'm so glad you think so, it envolved a lot of commitment 😉
@ CaptGPF, Thank you very much for your comment. As we say "better late than ever" 😄 and always apreciated.

The motorbike and figures are now finished and in place. One big step closer to the finish line.

Lebloge
I'm taking the train on the way,😬 how could I have missed this incredible work...😶‍🌫️ I have no words for it...🤔 except waaaw 🤩🤩

Villiers de Vos
The motorbike and figures came out super.

Marcin Terlikowski
Wow, nice try. I love it. And the kit is awesome as well... built one in winter scheme

Rui S
Beautifully done 👍

gorby
Nice work!

Djordje Nikolic autor
Thank you Lorraine!

Djordje Nikolic autor
Thank you Marcin! I agree, it is a great kit especially due to surface details and rivets, great for weathering. I'll check out your kit if you have it on scalemates

Djordje Nikolic autor
Thank you Rui and Gorby!

Bohrmann
Beautiful captured bird of prey. very nice and original project

Djordje Nikolic autor
Thank you Bohrmann!

Robert Podkoński
Great job!

Neuling
I agree with Robert. 👍

Djordje Nikolic autor
Thank Robert and Neuling!

Kesa Tiho
FINALLY!!! THE GODS HAVE BLESSED US!!!

Jennifer Franklin
Oh, very nice, those pieces will fit!!!

Jakko ‌
"Removing seams from roadwheels the Jakko way." Thanks for the shout-out 🙂

Though TBH, I find it takes about as long as clamping the wheel in a vice and scraping the seam down — the lathe is less effort but not really a timesaver, IMHO. Could be that's down to my lack of lathing skills, though.

Ben M autor
It took a long time but it's fun. Not every day I get to use a lathe.

Lorraine Lin
Wow! Tanks and cafe girls😁

[img1]

Ben M autor
As the kit is missing many parts, l will try 3d printing / scratchbuilding the missing parts. My resin printer isn't a very good one so it can be hard to get things to print correctly.

Jakko ‌
Quick tip: you don't need to take photos of your screen — press ⇧⌘4 instead 🙂

Ben M autor
There is a lot of work to do to remove the supports. I did a quick and dirty pass on one side and it fits perfectly!

I scaled running gear and tracks from a 1:56 stl by 175% to get to 1:32 and it fits properly.

Ben M autor
I got the tracks from here: cults3d.com/en/3d-mo..early-prod-july-1941

Jennifer Franklin
Very neat, love the 3D printing.

Ben M autor
Jakko: Youtube Video

🙂 🙂 🙂

Ben M autor
All missing parts 3d printed by upscaling from 1:56 to 1:32. Suspension and tracks won't be glued on til after painting. Same with radio antenna as I'll just break it off if I add it now.

Marcin Dudek
👀 Wathing

Rui S
I see you manage to do 3d printing 😮 lucky you. The tracks and bogies look wonderful 👍

Jennifer Franklin
Pretty soon, with 3D printing, the only limit will be our imagination.

Jakko ‌
That, and the time and effort you want to put into learning how to use the software and the printer … Both of which are what's kept me from wanting to do this myself 🙂

Ben M autor
Got kind of an acceptable gloss pink outcome. Respect to the car builders I see on here who put down perfect gloss coats!

Guy Rump
Looking good, following. 👍

Ben M autor
Painting the one part track and suspension takes a lot. I have literally worn out one brush so far, scrubbing in all the nooks and crannies.

gorby
Pink tank! Got to follow this build. 😄

Ben M autor
This is more fun than painting everything green.

Guy Rump
Following. 👍

Rodrigo José Barbosa Francisco autor
thank you very much

Villiers de Vos
Very nice work.

Rodrigo José Barbosa Francisco autor

Thank you very much.

Villiers de Vos
Very nice work.

Rodrigo José Barbosa Francisco autor

Thank you very much.

Rui S
Bela colecção e vitrine 👍

Rodrigo José Barbosa Francisco autor
Muito obrigado! As fotos não ficaram muito boas, preciso aperfeiçoar as técnicas de fotografia!

Villiers de Vos
A beautiful collection. Thank you for sharing.

Rodrigo José Barbosa Francisco autor

Thank you very much. There have been updates to the collection, but I haven't taken any photos yet.

Taylor Durbon
Good job on the gearbay. Will follow on👍

DerMattes
What pilot models are these?

Oleg Bogolei
Following)

ZHOU Kun autor
Thank you @Taylor Durbon @Oleg Bogolei

The pilots are 3D printed by my friend. The pilots are wearing HGU-55P helmets which are too modern for an A-6A aircraft, anyway I decided to use them. I dont have better pilots at hand. @DerMattes

Nicolas
Following

Akaidada
Following ：D

Chris T. An
Nice work progress, I will take a seat.

Sergej I
Great stuff, will you be also addressing the wrongly placed inboard fins on top of the wings? Trupeter did a decent mistake there...

Hangming Zhang
大佬牛批！期待成品！

ZHOU Kun autor
@Sergej I I am looking into it. Removing the fences on the kit is easy. The problems comes when one wants to make a fence with plastic sheet accurately🙂

ZHOU Kun autor
@Nicolas @Chris T. An @Akaidada Thank you! I am building with my insufficient spare time. Hope to make more progress as soon as possible!
@Hangming Zhang 过奖了！

Martin
Always excited to watch your in-progress builds!

Lorraine Lin
厉害厉害，那些襟翼是你自己切割的吗？

ZHOU Kun autor
@Martin Thank you!
@Lorraine Lin 脸盆这个细节很丰富 襟翼 扰流板 减速板是自带的 可选择偏转角度

Michael Kohl
Following too

ZHOU Kun autor
@Sergej I Hello! The inboard wing fences are correct for A-6A models. If you want to build an A-6E instead, you may have to move the fences inward.

Oleg Bogolei
Dont you want to bay this?
aliexpress.com/item/..078.1005006374265987

Sergej I
Kun, thank you for this reply. 👍 Now I understand where Trupeter made a shortcut. I have the E version to build... Will need to find a soul to model and print me new ones 🙂

Finn
Following

Patrick Hagelstein
Again, an in flight beauty! 👌🏼

Skyhiker
This is looking pretty nice. How is the kit? Did it give you any trouble?

ZHOU Kun autor
@Skyhiker I have added notes to the photos. May be helpful if you want to make a decent A-6 model out of 72nd scale version of Trumpeter A-6 Intruder

Spanjaard
+1

John Hughes
I'm beginning to think Leif is a member of the modelling mafia, here to make hostile takeover."What a lovely website! It would be a pity if the owner was to meet with an unfortunate... accident."🤣

Leif Hellström autor
Yes, some of the topics look ever so flammable!
But jokes aside, there was another website where people spent untold hours entering data, until one day the site just closed down. The owner apparently got bored and wandered off.

John Hughes
Management here seems to be a team effort, so I would think you're fairly safe here.

Leif Hellström autor
Well, yes, but there is somebody's name on "the lease", and once payments to the web hotel stops, pop goes the site.
As I said, I have been burned.

gorby
A site I was an admin of also ended without notice, just because the person with their name on the lease had a bit of a tantrum one day.
Thousands of hours of members contributions were lost instantly.

scalemates
Instructions and root passwords are in a safe at the bank.

This in case something happens with me.

Protection against me going insane and deleting everything and stopping is not realistic and would just be lying to you all. Even if it would be there I could destroy these mechanisms in place.

Leif Hellström autor
OK, so I assume that somebody will take over if or when you get abducted by aliens.

scalemates
Yes

Vincent
Very nice!!

Rui S
I like it too 👍

Shar Dipree
Very nice Warhawk.👍

Villiers de Vos
A beautiful finish.

Mark K
Superbly done!

builder_squirrel
so much details for the scale, are you using some aftermarket parts? like for the engine? wich ones? Congrats again for the build

Mark K
Very nice indeed!

Marko
Nice little plane and excellently built👍

gorby
I agree, a lovely model!

Łukasz Gliński
Very neat job on this OK plane 👍

Alec K
Nicely done Avka! The engine looks really good 👍

Mark K
Super!

Villiers de Vos
Very nice work.

Robert Podkoński
Good job indeed.

Rui S
Nicelly done 👍

Ben M
A beautiful build.

Mark K
Delightful!

Mr D
Very nice indeed 👍👍 well done

Rui S
I agree 👍

Mr D
Easy to forget about the Soviet lend/lease version, Smart👌 l built the RAF desert version, nice quality kit.👍

Villiers de Vos
Nice paint work and finish.

Finn
Well done

Mark K
Lovely!

scalemates
Done 👍

Leif Hellström autor
It seems you can remove the topic entirely: somebody moved away all the entries.

scalemates
Yes, empty topics are autocleaned after a while

scalemates
Merged