BT based artillery tank
![Album image #1 Album image #1](/albums/img/3/4/5/1731345-32239-42-720.jpg)
![Album image #2 Album image #2](/albums/img/3/4/6/1731346-32239-87-720.jpg)
![Album image #3 Album image #3](/albums/img/3/4/7/1731347-32239-75-720.jpg)
![Album image #4 Album image #4](/albums/img/3/6/8/1731368-32239-36-720.jpg)
The fitting of side panels is tricky, they seem to be a fraction to long. So some sanding was needed. Stil some pressure is needed to get them straight.
Also one of them came warped and with some nasty sinkmarks
Also one of them came warped and with some nasty sinkmarks
![Album image #5 Album image #5](/albums/img/1/9/2/1746192-32239-21-720.jpg)
![Album image #6 Album image #6](/albums/img/1/9/1/1746191-32239-84-720.jpg)
I F'd up, but is was luckily easily fixable. As Jean-Christophe pointed out the direction of the central stearingwheel hub is fixed as the wheel turns around it. I missed that and had to correct it.
![Album image #7 Album image #7](/albums/img/1/9/5/1750195-32239-43-720.jpg)
I used 48 links, but you have to be careful not to push them to much into eachother. Mine are under some tension because of it, well see how they hold up.
![Album image #8 Album image #8](/albums/img/2/1/5/1750215-32239-49-720.jpg)
The tracks are quite a chore, the easiest way I figured was cutting them with a stump of sprue attached.
![Album image #9 Album image #9](/albums/img/2/1/4/1750214-32239-50-720.jpg)
This is the easiest way I figured.
![Album image #10 Album image #10](/albums/img/2/1/3/1750213-32239-10-720.jpg)
After freeing them I cut the stump of sprue with the same cutter to a near minimum. This saved me some time fiddling with a file or sandpaper.
![Album image #11 Album image #11](/albums/img/1/3/2/1774132-32239-74-720.jpg)
![Album image #12 Album image #12](/albums/img/1/3/4/1774134-32239-97-720.jpg)
Komentáre
9 18 May, 08:11
![](/profiles/img/74842-817-s.jpg)
Nice! Watch out for the orientation of the steerable (front-most) road wheels. The hubs didn't rotate with the wheels - the flat bit should be horizontal.
7 June, 08:04
![](/profiles/img/32239-189-s.jpg)
Thank you Jean-Christophe! You saved me just in time, I had already glued the wheels together but with a bit of force could tear them apart again. Luckily they weren't glued to the model yet.
As you suggested the two bolt on the central hub should be pointed upwards!
Its a fun to build model, not to big, not to small. Overall fit and detail is good. There is room for some tweaking of details, but it's not mandatory
9 June, 12:49
![](/profiles/img/74842-817-s.jpg)
Glad to help! What you wrote is a better way of saying it.
I just noticed the box art is wrong in this respect.
Thanks for the tip, I think I'll build one too someday. One of my planned projects is a BT-7 from Tamiya, converted to the BT-7M (the Diesel variant) with the conversion kit from MR Modellbau.
10 June, 07:21
![](/profiles/img/32239-189-s.jpg)
Haha the boxart was the first thing I too checked, after reading your comment. Luckily the internet had the answers.
I can recommend to build the hobby Boss kit, it's fun. I'm now working on the tracks, less fun more repetition. But I'll get there, one link at the time.
I have the Tamiya BT too, but haven't build or compared it to this one. My plan was to convert it to a BT-7a with the help of a russian aftermarket kit. Mr. Modellbau has some great aftermarket sets, always tempting when I see them on a fair. Looking forward to see your take on the BT tank Jean!
14 June, 13:17
![](/profiles/img/32239-189-s.jpg)
I used Tamiya extra thin, just lined them up against a metal ruler in pairs of three. Till I had about twelve together, then fixed the pairs together and plied them over the wheels. Glue stuck perfectly and I had enough time to fold them with some sag.
They aren't glued to the wheels yet, for painting purposes.
16 June, 12:33