Heinkel He 177
Komentáre
29 13 January, 15:52
Живко ДжаковI'm watching! Front row seat please. I'm warning you that I'm stealing ideas 😉 I'm planning to start the same one very soon. I doubt I'll achieve such results, but dreams are free. 🙂
1 18 January, 16:21
AndreasKThanks for your kind comments. Probably most of the effort will not be visible in the end. 🤷🏼♂️
Especially since the quality of the clear parts is very bad. They are really thick and blurry.
@Живко Джаков: could you please check your kit if the quality of the clear parts is also bad? I was considering to buy a replacement sprue from Revell, but I read in some other reviews as well about this issue. So I am not sure if a replacement will be any better...
1 19 January, 12:41
Живко ДжаковMine are at a satisfactory level and are definitely better than what you have. He 177 | Album by JivkoDjakov (1:72) [img1]
19 January, 13:51
AndreasKThanks for your feedback. I guess in this case, I will reach out to Revell for a replacement first. Maybe they will grant it for free because it is clearly a quality issue.
@Jivko: which release of the kit do you have? A newer one or also the 2000 version?
20 January, 10:11
SkyhikerAndreasK, you should try vacuforming a new canopy using the kit parts as a form to wrap a clear styrene sheet around. Just look in your garbage for a clear food container such a salad box. You can use your household appliances to do vacuforming. A sweeper and a toaster is all you need.
20 January, 10:26
Живко ДжаковI have a package from 2018. As far as I understand, I'm lucky. It's common for the clear parts to go bad. Call Revel for a replacement. It would be helpful to know what they will do. Heinkel He-177 A-5 "Greif" (Revell 03913, 1:72)
20 January, 10:33
SkyhikerMake sure to dry fit your canopies. Revell is notorious for making canopies that don't fit. I have the same kit as Живко Джаков but I haven't opened it yet.
1 20 January, 10:39
CuajeteThose interiors look fantastic. It would be a shame if you couldn't see them properly through a poor quality canopy. I think I have the same problem, because I have the 2000 box.
20 January, 19:56
Живко ДжаковI would recommend a few things. First, use a powerful vacuum cleaner. A good vacuum is very important. Second, test with something else. A metal cart or even just a large nut is a good place to start. Third, wait for the mold to cool down before trying again. Polystyrene is a very good molding material, but it is not a good mold. I have never done this before. I have only done large commercials with vacuum molding. This video explains well how to make a molding press. Youtube Video
1 20 January, 19:56
GaryAmazing work. might inspire me to restart my paused build of same Kit (on pause since 2020)
20 January, 20:38
