122mm Howitzer 1938 M-30

1
August 18, 2017
2
August 18, 2017
3
August 18, 2017
4
August 18, 2017
5
August 18, 2017
6
August 18, 2017
This (very) little piece has no less than 14 plastic parts and 2 PE pieces
7
August 30, 2017
8
August 30, 2017
Not sure I bent that small PE wire correctly but it's so small you need a magnifying glass to see it properly so I'm pleased I managed to put it at all
9
August 30, 2017
Yeah, those two cross-like plastic pieces in the front had to be glued separately, and yes they are 2mm each
10
August 30, 2017
The metal barrelis included in the kit and it's actually rifled. Too bad the hole is too shallow but nothing a little black paint won't fix
11
August 30, 2017
The shield is supposed to be a smooth rounded piece but since it's made out of multiple pieces you get a very ugly seam in the middle. Will have to fix this later somehow
12
August 30, 2017
13
August 30, 2017
14
August 30, 2017
15
August 30, 2017
16
August 30, 2017
17
August 30, 2017
18
August 30, 2017
19
August 30, 2017
Two ammo boxes included with the kit. The wood texture on the exterior is quite nice. There are also different types of projectiles included with the boxes
20
August 31, 2017
21
August 31, 2017
22
August 31, 2017
23
August 31, 2017
After all the trouble with the PE inner structure they're not even gonna be visible once this is closed up
24
August 31, 2017
25
August 31, 2017
26
September 1, 2017
27
September 1, 2017
28
September 1, 2017
29
September 1, 2017
30
September 1, 2017
31
September 1, 2017
32
September 1, 2017
33
September 1, 2017
34
September 1, 2017
35
September 1, 2017
36
September 3, 2017

Komentáre

1 18 August 2017, 21:43

Ingo F
Nice, i am in.

18 August 2017, 21:53

Dan M
Started building the howitzer and ... wow ... I've built some Trumpeter kits before but never one with so many small pieces. Sometimes it's hard to figure out where each piece needs to go and I'm amazed the carpet monster was not hungry these days. Hopefully it will stay this way till the end 🙂
For example: the fire-aiming telescope in pic 6 is composed of 14 plastic parts and two PE parts and it's less than 2cm!!! Crazy!!!

18 August 2017, 21:53

Dan M
Welcome aboard Ingo

18 August 2017, 21:55

EnsignExpendabl
Looks good, sadly Soviet artillery is very underrepresented in 1:35th scale.

21 August 2017, 14:11

Vitek Vrog
This is a howitzer! Great one, lets make another one😉 Im interested in😉

21 August 2017, 20:06

Alexey Leontev
Looks good!

21 August 2017, 20:29

Dan M
Thank you James, EnsignExpendabl, Vitek and Alexey! And welcome aboard!

22 August 2017, 06:50

Dan M
More progress on the build; not as fast as I would've liked due to the huge amount of (very) small pieces and PE. It truly is an eye-straining project 🙂, but I'm actually pleased with it so far.

30 August 2017, 09:19

Dan M
Finally the build is done, including the limber. Despite some hair-pulling moments the built kit is quite lovely.
I think my next build is going to be a Tamiya kit, I need something easy 🙂

1 September 2017, 22:45

Vitek Vrog
Hallo, did you want to have set of Ya-12 + limber + 122 M30? If yes, you have the limber wrong. this drawbar is designed for horse drawn.

3 September 2017, 12:05

Vitek Vrog
It should be short like this: [img1]
But no worry about that! just cut long segment for horses off!

3 September 2017, 12:07

Dan M
Hi Vitek, yes, I know, I wanted to build it fully just for the picture. The limber section designed for horse carriage is detachable, the nail that is holding it is not glued down (even the instructions tell you this), so for YA-12 it will be detached.
I've attached a picture with it detached.

3 September 2017, 17:52

Vitek Vrog
Yes, for photos are longer bether :-P 😄

5 September 2017, 17:42

Project info

YA-12 + 122mm M-30 Mod1938

36 snímky

1:35

Pozastavené

1:35 122 mm Howitzer 1938 M-30 (Trumpeter 02344)

Všetky albumy

Zobraziť všetky albumy »