SCM Aggressor Group Build Fall 2019
![Album image #1 Album image #1](/albums/img/3/2/8/647328-52499-69-720.png)
Bird1: 86-0295, USAF 18 AGRS 'AK', F-16C Block 30D
![Album image #2 Album image #2](/albums/img/2/9/2/657292-52499-85-720.jpg)
Bird2: 85-1373, USNavy NFWS, F-16N Block 30C
![Album image #3 Album image #3](/albums/img/1/1/2/647112-52499-67-720.jpg)
This is it! Stash for both Aggressors accounted for and ready for October. 🙂
![Album image #4 Album image #4](/albums/img/1/1/4/647114-52499-95-720.jpg)
And one daylight photo...
![Album image #5 Album image #5](/albums/img/2/9/3/657293-52499-17-720.jpg)
These gray tones are going to be a challenge to match! And not so many decent photos available...
![Album image #6 Album image #6](/albums/img/7/6/7/658767-52499-12-720.jpg)
Carpetry and masonry hath begun...
![Album image #7 Album image #7](/albums/img/7/6/9/658769-52499-46-720.jpg)
Aires resin cockpit. Cleaning it was... I ought to be rescued by Greta, breathing so much plastics...
![Album image #8 Album image #8](/albums/img/7/6/8/658768-52499-67-720.jpg)
Dryfitting...
![Album image #9 Album image #9](/albums/img/7/7/0/658770-52499-56-720.jpg)
Cleaned the main wheel bays and nozzles...
![Album image #10 Album image #10](/albums/img/7/7/1/658771-52499-65-720.jpg)
F-16N's fifty shades of gray test...
![Album image #11 Album image #11](/albums/img/0/1/5/659015-52499-55-720.jpg)
F-16N's updated gray shades. I think this is much closer now...
![Album image #12 Album image #12](/albums/img/6/9/9/665699-52499-11-720.jpg)
Well I haven't been sleeping... just slow over life
![Album image #13 Album image #13](/albums/img/7/0/0/665700-52499-37-720.jpg)
My eyesight is fubar after this...
![Album image #14 Album image #14](/albums/img/7/0/1/665701-52499-85-720.jpg)
But it does look decent tho.
![Album image #15 Album image #15](/albums/img/7/0/2/665702-52499-87-720.jpg)
IP surface still work to do
![Album image #16 Album image #16](/albums/img/7/0/3/665703-52499-44-720.jpg)
This ought to do it...
![Album image #17 Album image #17](/albums/img/4/9/8/669498-52499-76-720.jpg)
Putty time, my least preferred part of modeling :/
![Album image #18 Album image #18](/albums/img/4/9/9/669499-52499-91-720.jpg)
...because it is never OK enough 😄
![Album image #19 Album image #19](/albums/img/5/0/0/669500-52499-23-720.jpg)
Resin... my first time.
![Album image #20 Album image #20](/albums/img/5/0/1/669501-52499-57-720.jpg)
This is better 😄
![Album image #21 Album image #21](/albums/img/5/0/2/669502-52499-23-720.jpg)
Ordnance for both birds
![Album image #22 Album image #22](/albums/img/5/0/3/669503-52499-40-720.jpg)
F-16N will not have anything under wings.
![Album image #23 Album image #23](/albums/img/5/0/4/669504-52499-58-720.jpg)
First time pre-cut masks... don't want to do it any other way ever again, this is pleasure 🙂
![Album image #24 Album image #24](/albums/img/5/0/5/669505-52499-78-720.jpg)
...and drying
![Album image #25 Album image #25](/albums/img/5/3/5/669535-52499-13-720.jpg)
The official scheme for the N-bird
![Album image #26 Album image #26](/albums/img/5/0/6/669506-52499-70-720.jpg)
Mr Surfacer 1500... this stuff rocks.
![Album image #27 Album image #27](/albums/img/5/0/7/669507-52499-31-720.jpg)
And that is it for this weekend 🙂
![Album image #28 Album image #28](/albums/img/3/2/8/676328-52499-63-720.jpg)
Nozzles insides in bourbon vanilla cream 😄
![Album image #29 Album image #29](/albums/img/3/2/9/676329-52499-37-720.jpg)
Had fun with preshading 😄
![Album image #30 Album image #30](/albums/img/3/3/0/676330-52499-76-720.jpg)
Will be pity to cover it with paint
![Album image #31 Album image #31](/albums/img/3/3/1/676331-52499-21-720.jpg)
from below
![Album image #32 Album image #32](/albums/img/3/3/2/676332-52499-58-720.jpg)
and bits and bobs...
![Album image #33 Album image #33](/albums/img/3/3/4/676334-52499-43-720.jpg)
Alaskan Viper waiting primed..
![Album image #34 Album image #34](/albums/img/3/3/3/676333-52499-33-720.jpg)
first shade of gray
![Album image #35 Album image #35](/albums/img/3/3/5/676335-52499-17-720.jpg)
putty over first
![Album image #36 Album image #36](/albums/img/3/3/6/676336-52499-50-720.jpg)
putty over second
![Album image #37 Album image #37](/albums/img/3/3/7/676337-52499-27-720.jpg)
from below
![Album image #38 Album image #38](/albums/img/3/3/8/676338-52499-46-720.jpg)
...aaand last of the three grays
![Album image #39 Album image #39](/albums/img/3/3/9/676339-52499-78-720.jpg)
with radome painted
![Album image #40 Album image #40](/albums/img/3/4/0/676340-52499-14-720.jpg)
closeup, manually rolled rivets... go count them 😄
![Album image #41 Album image #41](/albums/img/3/4/1/676341-52499-88-720.jpg)
left wing
![Album image #42 Album image #42](/albums/img/3/4/2/676342-52499-27-720.jpg)
...looks really massacred from close, but that's just technology, eyes don't see...
![Album image #43 Album image #43](/albums/img/3/4/3/676343-52499-60-720.jpg)
F-16N with fifty shades of gray. Seems about right, check reference photo, feedback most welcome.
![Album image #44 Album image #44](/albums/img/3/6/3/680363-52499-69-720.jpg)
163272 Glazed for decals and paneling
![Album image #45 Album image #45](/albums/img/3/6/4/680364-52499-83-720.jpg)
Front
![Album image #46 Album image #46](/albums/img/3/6/5/680365-52499-22-720.jpg)
Looks beat up like an averge MiG 😄
![Album image #47 Album image #47](/albums/img/3/6/6/680366-52499-56-720.jpg)
Nozzle AKI steel with transparent Tamiya red and green for variation
![Album image #48 Album image #48](/albums/img/3/6/7/680367-52499-16-720.jpg)
Decals mostly on, will not be adding stencils as they were overpainted on the original aswel...
![Album image #49 Album image #49](/albums/img/2/7/7/688277-52499-83-720.jpg)
Paneled, weathered, matt lacquered, main part done. Now small bits...
![Album image #50 Album image #50](/albums/img/3/5/1/698351-52499-77-720.jpg)
Minus the ordnance, I deem this one complete! ACME pod and Sidewinder and better pix, when I am home for daylignt
![Album image #51 Album image #51](/albums/img/7/0/9/700709-52499-67-720.jpg)
Meanwhile, the Alaskan Aggressor is standing by for the paint job...
![Album image #52 Album image #52](/albums/img/7/1/0/700710-52499-72-720.jpg)
Using Aero Masks is easy peasy...
![Album image #53 Album image #53](/albums/img/7/1/1/700711-52499-82-720.jpg)
Maybe its comparable to e-bike v. bike arguements...
![Album image #54 Album image #54](/albums/img/7/1/2/700712-52499-95-720.jpg)
...but since this is for my soul...
![Album image #55 Album image #55](/albums/img/7/1/3/700713-52499-37-720.jpg)
...masks FTW! 😄...
![Album image #56 Album image #56](/albums/img/7/1/4/700714-52499-79-720.jpg)
green, mask, brown, mask, black, mask...
![Album image #57 Album image #57](/albums/img/7/1/5/700715-52499-24-720.jpg)
final green, and....
![Album image #58 Album image #58](/albums/img/7/1/6/700716-52499-13-720.jpg)
...unmasking!
![Album image #59 Album image #59](/albums/img/7/1/7/700717-52499-16-720.jpg)
Took me five hours for all the masking and painting. I'm sold, ordering more!
![Album image #60 Album image #60](/albums/img/1/0/2/701102-52499-15-720.jpg)
Propperly glazed for decals! 2 layers of GX then twice over with Mr Leveling Thinner to get that shine.
![Album image #61 Album image #61](/albums/img/9/3/7/733937-52499-41-720.jpg)
![Album image #62 Album image #62](/albums/img/9/3/8/733938-52499-31-720.jpg)
![Album image #63 Album image #63](/albums/img/9/3/9/733939-52499-71-720.jpg)
![Album image #64 Album image #64](/albums/img/9/4/0/733940-52499-31-720.jpg)
![Album image #65 Album image #65](/albums/img/9/4/1/733941-52499-24-720.jpg)
![Album image #66 Album image #66](/albums/img/9/4/2/733942-52499-61-720.jpg)
![Album image #67 Album image #67](/albums/img/9/4/3/733943-52499-95-720.jpg)
![Album image #68 Album image #68](/albums/img/9/4/4/733944-52499-22-720.jpg)
![Album image #69 Album image #69](/albums/img/9/4/5/733945-52499-42-720.jpg)
![Album image #70 Album image #70](/albums/img/9/4/6/733946-52499-86-720.jpg)
![Album image #71 Album image #71](/albums/img/9/4/7/733947-52499-51-720.jpg)
![Album image #72 Album image #72](/albums/img/9/4/8/733948-52499-88-720.jpg)
![Album image #73 Album image #73](/albums/img/9/4/9/733949-52499-21-720.jpg)
![Album image #74 Album image #74](/albums/img/9/5/0/733950-52499-82-720.jpg)
![Album image #75 Album image #75](/albums/img/9/5/1/733951-52499-63-720.jpg)
![Album image #76 Album image #76](/albums/img/9/5/2/733952-52499-37-720.jpg)
![Album image #77 Album image #77](/albums/img/9/5/3/733953-52499-21-720.jpg)
Komentáre
1 8 August 2019, 14:00
![](/profiles/img/35457-839-s.jpg)
Nice Sergej I...looking forward to this GB, excellent choice by the way...👍
8 August 2019, 15:08
![](/profiles/img/52499-702-s.jpg)
Good story of the Viper here:
thedrive.com/the-war..uns-legendary-hotrod
8 August 2019, 20:44
![](/profiles/img/35457-839-s.jpg)
Good and interesting story about the history of the F-16N series, thanks for sharing this...
8 August 2019, 22:04
![](/profiles/img/23842-243-s.jpg)
Great subject and a great article too. In the article I like the one painted tan and black.
8 August 2019, 23:26
![](/profiles/img/23842-243-s.jpg)
@Daniel: Right? I almost want to buy one just to try and build that bird. I did buy and F-5F and will try and complete this one for the group build as well. Love those Florida aggressors from VFC-111.
9 August 2019, 19:04
![](/profiles/img/17422-305-s.jpg)
A difficult one, especially with the walkways. I love it nonetheless.
27 August 2019, 13:49
![](/profiles/img/52499-702-s.jpg)
Thanks, Hans.
Maciej, I haven't decided entirely on the walkways method, this being a 1:72, decals are still an option... but AK RC paints are a pleasure to work with, can take heavy taping and weathering without the lacquer protection so... let's see 🙂
27 August 2019, 14:01
![](/profiles/img/16620-772-s.jpg)
Hello Sergej.. Just a heads up. If You intend to build BDU splinter keep in mind that is USAF Blk 30 bird and not USN F-16N. N version had small intake mouth, u will need big one for Blk 30. Any chance both intakes are in kit?
27 August 2019, 19:50
![](/profiles/img/17422-305-s.jpg)
I concur. Block 30s got the big mouth intake after 86-0262. Before that, all F-16s had the same intake later called NSI.
27 August 2019, 20:21
![](/profiles/img/52499-702-s.jpg)
Thanks for the heads up, Dejan. Indeed the Hasegawa kit only includes the small intake, but for the Splinter F-16C I got the CMK 7053 Exterior set with large resin intake and some other parts.
I will also use the other parts for the F-16N, except the intake.
Have to study the nozzle aswel. The wa I understood is, that F-16N already had a stronger engine and nozzle like F-16C. Is that about right?
27 August 2019, 20:28
![](/profiles/img/16620-772-s.jpg)
Nozzle is ok for Blk30 General Electric F110 and 18th Aggressor squadron (AK). 64th Aggressors (WA) Block 32 F-16C's have the P&W F100-PW-220 engine and different nozzle.
27 August 2019, 21:12
![](/profiles/img/52499-702-s.jpg)
Just dumping both airframes to be built:
f-16.net/aircraft-da..rframe-profile/1744/
f-16.net/aircraft-da..rframe-profile/2078/
Also found out I will need to scratch improvise the RWR "beer can" antennas on the splinter aswel, Hasegawa model is a Block30C with antennas on the fuselage. Might rework the RWR's from intake and position them on front wing where the Block30D have them...
20 September 2019, 23:17
![](/profiles/img/25429-812-s.png)
Dejan, both birds are GE F110 powered Block 30s. The only difference I can distinguish is in the intake as you described. The Exhausts should be the same though.
2 October 2019, 18:13
![](/profiles/img/52499-702-s.jpg)
Thanks all 🙂
The blue-gray is still a bit too blue... going to wait for daylight then play between FS35237 and FS35450
2 October 2019, 18:52
![](/profiles/img/52499-702-s.jpg)
Patrick, next to air intake, the differences are also RWR antennas on wings/intake and gear design, the 30D is supposed to have reinforced design and 30C normal. Still finding what that means 😄
Decals wise, Hasegawa missed a bit, F-16N #163272 had much lighter NAVY inscription (see photos) than decals (almost black) and tail-number was 45 (see photos) not 46 (Hategawa)... but minor inconvenience, I anyway need standard navy numbers and letters 😛 already in transit...
2 October 2019, 19:38
![](/profiles/img/25429-812-s.png)
Sergej, I once posted a link to a very detailed overview of all the Block details somewhere here on Scalemates but I can't seem to find it anymore... Should be something like Hyperscale or any other forum...
3 October 2019, 13:48
![](/profiles/img/25429-812-s.png)
cybermodeler.com/air../viperversions.shtml
Not the one I meant but also quite informative.
3 October 2019, 13:53
![](/profiles/img/52499-702-s.jpg)
Thanks Patrick for this. The page lacks differences of different Block 30 models. Like Block 30 C (F-16N) and D (F-16C of 18 AGRS).
That is better described on "F-16.net" site: f-16.net/f-16_versions_article6.html
3 October 2019, 14:14
![](/profiles/img/52499-702-s.jpg)
Thanks Patrick. I found Gunze to be better matching than Real Colours from AKI. So going with them on F-16N.
24 October 2019, 04:31
![](/profiles/img/33356-330-s.png)
Nice work on those cockpits.
I just noticed your comment "the 30D is supposed to have reinforced design and 30C normal", from what I gathered from pictures for my build, this means reinforced block 40/50 gear+landing lights on the front gear door, but block 30 wheels and non-bulged MLG doors (with corresponding actuators). This is just my observations on the airframe I'm modelling, so not to be taken as gospel 🙂
24 October 2019, 06:55
![](/profiles/img/52499-702-s.jpg)
Oops, Patrick, missed your comment. Here are the grays:
1. The lightest is FS36307 in instructions, used Mr Color C334
2. The bluish is supposed to be FS35237, I am using MrColor C73, it's spot on...
3. The medium gray is supposed to be FS36251, this one is a tough mix. I'm using 50/50 C317 and C334
But it seems the colors were fading fast on these birds...
3 November 2019, 17:38
![](/profiles/img/25429-812-s.png)
Great! Thanks Sergej! These come in handy for both Aggressor and Greek F-16s as they basically use the same paint scheme in the same harsh environment.
3 November 2019, 18:39
![](/profiles/img/52499-702-s.jpg)
Yaaay, work-life-modeling balance finally allowed some modelling this weekend 😄
24 November 2019, 20:59
![](/profiles/img/48987-587-s.jpg)
looking really good, very neat camo pattern Sergej! Might be the photo, but it looks maybe just a little tad too bright? But after a wash&some weathering it may as well just come out photo-realistic 🙂 Just my 2c, enjoying your build! 👍
24 November 2019, 21:22
![](/profiles/img/52499-702-s.jpg)
Thanks Daniel, my perception is the same. Luckily it's much easier to darken than it is to brighten...
24 November 2019, 21:26
![](/profiles/img/25429-812-s.png)
As the real aircraft is sun bleached, it's not that bad that the colors are a little light. Adding a wash and some grime will darken it up enough. I think it looks great already! 👍
25 November 2019, 00:40
![](/profiles/img/25429-812-s.png)
Really looking good! It darkened up a bit, right? Curious to the final flat coat.
8 December 2019, 19:47
![](/profiles/img/52499-702-s.jpg)
Thanks Patrick! I hope to finish it in this decade still. I'm heavily procrastinating gears and other small bits...
8 December 2019, 20:13
![](/profiles/img/52499-702-s.jpg)
I think I will not finish by deadline, but I had much fun weathering this one with oils... I spent a full weekend on it 🙂
25 December 2019, 22:00
![](/profiles/img/52499-702-s.jpg)
Merci, Laurent. It did turn out quite well, panel lines a bit too strong but I do like scale 72nd a bit cartooney 🙂
26 December 2019, 16:07
![](/profiles/img/52499-702-s.jpg)
Thanks Holger, I hope this is not the british version of interesting 😄.
Patrick, now I am off to check on Ronan's work 👍
27 December 2019, 18:16
![](/profiles/img/52499-702-s.jpg)
Oh wow. That mate is a helicopter god. Even hinting that my wallpainting resembles his technique is both blasphemic yet so motivating 👍
27 December 2019, 18:33
![](/profiles/img/52499-702-s.jpg)
DUNN! It's been my first resin parts, my first PE parts and some other firsts... details show that there is still potential, but in general I am happy with the outcome. Please share your observations, not necessary only good, I like to learn. Better pix coming up in a week or so.
19 January 2020, 16:35
![](/profiles/img/25429-812-s.png)
Hi Sergej, the Viper looks awesome! Thinking of ways to improve I come up idle. There's been a discussion about colors above but you nailed that perfectly! Nothing comes to mind right now, keep up the good work! 👍
20 January 2020, 14:32
![](/profiles/img/48987-587-s.jpg)
I agree, looks cool in the bleached "cartoonish" look you gave it 👍 and I also agree: nothing as fun as to get carried away in a nice all day oil weathering session😉
21 January 2020, 15:14
![](/profiles/img/52499-702-s.jpg)
Photo phinish 🙂
F-16N Num. 85-1373 NSFW Aggressor | Album by Vargbrujo (1:72)
26 January 2020, 12:07
![](/profiles/img/52499-702-s.jpg)
Thanks James, it's really more tools than skill... but allinall, it was FUN to mask and paint 🙂
26 January 2020, 17:56
![](/profiles/img/33356-330-s.png)
Man I wish I had gone for those masks for my arctic viper. Great looking results on both planes Sergej 👍
26 January 2020, 20:49
![](/profiles/img/52499-702-s.jpg)
Done! Complete! Took a pandemic to finish it, but here we are 😄
Two Tamiya Vipers already waiting in stash for black/gray and blue/gray Alaskan Splinters... we need another Aggressor Group build haha...
7 April 2020, 13:56
![](/profiles/img/52499-702-s.jpg)
Thank you all, the two have been pain and pleasure to build,
now I have a brief R&R with two F9 Panthers, then back to Vipers 🙂
7 April 2020, 18:55
![](/profiles/img/25429-812-s.png)
Beautiful!!! It reminds me that I joined that group build as well with a Hornet. I do not only need a face mask for this pandemic, but to protect me from the collected dust on that one too. 😉
7 April 2020, 20:28
![](/profiles/img/52499-702-s.jpg)
Thank you Patrick and Stefan. Indeed I was the smart one in the family who was already equiped with PPF2 masks while the rest of the town are wearing scarfs to the shop 😄 But yeah, resin is teh lung destroyer of the model builders 😄
Stefan this was my first real attempt in oil weathering. I would say I overdid a little, next challenges will be in more subtle way... thank you though, I am glad you like it.
7 April 2020, 21:01
![](/profiles/img/48987-587-s.jpg)
Those are looking very good, nice crisp work and a unique, interesting post effect - even looks a bit like hoarfrost after a cold Eielson night, very nice 👍
8 April 2020, 06:10
![](/profiles/img/48665-446-s.jpg)
Very nice couple there in 2 very different finishes 👍. Really cool treatment for the camo version too!
The Aggressor GB really brought some creative action 🙂
8 April 2020, 08:05
Project info
Group Build
![SCM Aggressor Group Build Fall 2019 in](/events/img/11528-48987-14-p.jpg)
SCM Aggressor Group Build Fall 2019
1. október
1. október