MS 410 build processvyhliadka: Prezentácia Mozaika zoznam 1June 1, 2021 2June 1, 2021The exhaust pieces do not look good out of the box. I've filled the hole and will drill new ones with custom exhaust pieces. 3June 4, 2021The front intakes were opened up on both sides. 4June 4, 2021The small ducts were also opened up, though it does not show well on the picture. 5June 4, 2021Very light scratchbuilding done on the interior, as this will be a closed canopy build and any excessive details would not be visible. 6June 4, 2021I decided to model the elevators in the downward position to give the plane a little bit of interest. 7June 4, 2021I modeled the large intake grill and purposefully printed it with a low quality (0,2mm layer lines). This way I achieved a convincing grill look and I don't need to worry about cleaning up the kit piece or glue residue. 8June 10, 2021Scratchbuilt exhaust tips in place 9June 10, 2021scratchbuilt exhaust tips 10June 10, 2021coming together 11February 17, 2022 12February 17, 2022 13February 17, 2022 14February 17, 2022 15February 17, 2022 16February 17, 2022 17February 17, 2022 18February 17, 2022 19February 17, 2022 20February 17, 2022 Komentáre 8 1 June 2021, 08:25CuajeteFollowing.1 June 2021, 20:42Alec KSame. Nice progress so far 👍4 June 2021, 13:22Dave FlittonWatching4 June 2021, 16:21Project infoMorane Saulnier M.S.41023 snímky1:72dokončenýVšetky albumyZobraziť všetky albumy »