LCS-2 Project (700)
1010116 LCS-2 (1/700-scale CyberHobby) with epoxy ballast. Tube is for securing nut.
The evolution of Naval Ships: USS Jarvis (DD-393), USS O. H. Perry (FFG-7), USS Independence (LCS-2) in 1/700
101017 LCS-2 dry-fit on pedestal
101017 LCS-2 Resin ballast (5-min epoxy)
101018 LCS-2 fully assembled and primed for hand-painting.
101024 LCS-2 in primer (WM Rattlecan grey primer)
101024 LCS-2 in primer (WM Rattlecan grey primer)
101027 LCS-2 Hull plating effect: lines are #2 pencil
101027 LCS-2 Hull plating effect: graphite from #2 pencil, rubbed in by hand, then patterned with pencil eraser.
101027 LCS-2 Hull plating effect: graphite from #2 pencil, rubbed in by hand, then patterned with pencil eraser.
101104 LCS-2 Hull plating effect: graphite from #2 pencil, rubbed in by hand, then patterned with pencil eraser.
101106: Masked for red anti-fouling.
101107: Unmasking.
101107: Hull after unmasking.
101108: Painted and gloss-coated, ready for decals.
101108: Painted and gloss-coated, ready for decals.
101107 LCS-2, decal application. I appreciate the individual elements of the flight deck decal, but it is time consuming!
101109 LCS-2, more decal application. The flight deck markings take time, if they are to look respectable.
101109 LCS-2, more decal application.
101122: Rigging the flight deck safety netting.
101122: Rigging the flight deck safety netting.
101122: Rigging the flight deck safety netting.
1011202: Mast and upperworks.
1011202: Mast and upperworks.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
1011202: Complete.
Komentáre
11 11 October 2022, 21:02
Robert PodkońskiGood work! (and instructive... I have this kit in my stash too 😉 )
12 October 2022, 06:20
