WIP - 1988 Ford Mustang GT
Komentáre
12 14 November 2022, 13:55
![](/profiles/img/25292-311-s.jpg)
Started , looks chaotic as always 😄.
Build the components together and ready for paint .
14 November 2022, 17:01
![](/profiles/img/18821-901-s.jpg)
Leaning back, grapping my Popcorn and watch you over the shoulder..
16 November 2022, 11:08
![](/profiles/img/25292-311-s.jpg)
Nice to see you 😉👍
Couple days ago, i prepaid the body for painting, after all "undercarriage" parts where painted silver or black.
I scripted the panel lines on the rear lid and some sinkholes filled with superglue. Also the bumpers where mounted and sanded "in line".
So the body is ready for filler and paint.
And the engine is nearly ready for installing.
18 November 2022, 07:21
![](/profiles/img/18039-337-s.jpg)
I had an 88 GT, Cranberry red Metallic, had T- Tops that leaked like a bitch, but man was it fast, I miss that car !
18 November 2022, 22:28
![](/profiles/img/18039-337-s.jpg)
Was just like this, should have kept that car. I read only about 500 were made in T-Top. Looked like this one.
static.cargurus.com/..09572-1600x1200.jpeg
19 November 2022, 19:44
![](/profiles/img/108467-993-s.jpg)
Thanks for the information Bob I dident know the fox body came whef a t top that would have been a cool car
I had a few nissan nx wheed t tops
22 November 2022, 14:19
![](/profiles/img/25292-311-s.jpg)
Jv, the kit has a T-Top and the matching sunvisor molded in. I'll load up a picture soon 😉
22 November 2022, 15:07
![](/profiles/img/25292-311-s.jpg)
The body is painted in silver with two layers of clear coat. Next days, I will sand and polish the roof and the engine hood
I've attached also pictures from the roof inside. Bob , Jv, you can see the molded option for a t-top. I think about to by a second kit like this and build it as a t-top. Like the idea and I think, the model looks nice after it is done.
And btw, i changed the seats. To make them fit, they need to thin them on the bottom.
22 November 2022, 21:25
![](/profiles/img/18039-337-s.jpg)
Looking good, I did this kit in its original MPC issue years ago, but as for T-Tops and convertibles, I'm done with them, too many hassles. My 08 Shelby is a Coupe with no leaking issues.
22 November 2022, 23:44
![](/profiles/img/34342-900-s.jpg)
Is there something on the upper right side of the trunk- C-pillar meeting point? Or just my eyes gone wrong?
23 November 2022, 08:40
![](/profiles/img/25292-311-s.jpg)
Yes Istvan, good Eye - there is a sinkhole from a moldingline i missed
24 November 2022, 10:14
![](/profiles/img/25292-311-s.jpg)
also last update a long time ago. I was very busy and made pictures, but had "no time" for constant updates.
in the meantime i finished the interieur with the chassis. Engine is mounted and all is ready for the body.
the body is always the part that needs more time.
8 December 2022, 19:59
![](/profiles/img/25292-311-s.jpg)
Perhaps, you are wondering about the second body.
the painted body was wrapped , but that was not the case why i took another one.
I glued the sideskirts on the wrong side! stupid idea, i tought - but with that mistake i wont build that buddy ready. so i decided to take a new body (god thanks i had the kit twice) to make that right.
same sanding and work on the blue body, paintjob was fine and now i can start from this point again.
Next will be the trim and tainting windows.
8 December 2022, 20:07
![](/profiles/img/108467-993-s.jpg)
Yes I also like to have dobbels but unfortunately can't always have that but luckily you had a second one
Good progress sofare
8 December 2022, 20:13
![](/profiles/img/25292-311-s.jpg)
Thanks Jv. If i hadn't another kit, i think, i had tried to remove the sideskirts. perhaps. they are really really good glued on.
from this point, the new body is painted and i painting the window frames.
i tainted the windows with thinned tamiya smoke. After couple days of drying i glued in the windows
Also i glued a piece of sheet to the a-pillar where the mirrors will be glued on - the kit has no mountingspot for them.
11 December 2022, 10:57
![](/profiles/img/25292-311-s.jpg)
Last update on this.
It is gone on the finish line. Windows, Interieur and Chassis were mounted and the (silly) headlights i thinned out. they are to thick. If i build this kit again (and i will, because i have the other painted body), i will replicate the headlights from the revell kit. I dont like the chromethings there...
At last, i painted the rear lights and mounted the wheels.
This one is done. hurrah!
26 December 2022, 19:29
![](/profiles/img/28909-839-s.png)
You made a wonderful model of a hideous car. Can't find any angle from which it looks remotely okay (the real one!)
26 December 2022, 21:19
![](/profiles/img/18821-901-s.jpg)
Really cool. When I think 20+ years back, when I did this, it never was one of my favorite kits. Today there is a lot of knowledge and experience on top and that are those results. I can't wait when you start the second. Especially the headlights.
27 December 2022, 22:40
![](/profiles/img/34342-900-s.jpg)
I think, you did your best. I love the Fox Mustangs, somebody should make a better kit...
28 December 2022, 06:40