General Chaos

1
June 8, 2023
This is the stance I'm going for. The wheels are swap meet from an old Nascar kit.
2
June 8, 2023
I replaced the firewall with styrene as I didn't like the one included with the kit. The whole engine bay in the kit looks like the mold was melted at one point so I sanded the inner fenders smooth.
3
June 8, 2023
Moving on to the interior, good thing the test fit shows the steering wheel is way too low. More to come soon.
4
June 9, 2023
I shot the body with white primer.
5
June 9, 2023
Here's the body with Createx pearl silver over the white.
6
June 12, 2023
Createx Transparent Green over the silver. I did not like how it laid down but I got 'er done.
7
June 12, 2023
8
June 12, 2023
I design a single color flag and name in Corel Draw, then had vinyl cut on my wife's Cricut machine. Once I applied the vinyl I clear coated with gloss Rust-Oleum.
9
June 12, 2023
Started work on the Hemi. I drilled holes for the spark plug wires and pcv breathers. The pin at the bottom of the picture is from a computer hard drive. You can also see my airplane landing gear re-purposed as an a/c compressor.
10
June 12, 2023
I had to run a belt for the a/c compressor. The pcv breathers are in too.
11
June 16, 2023
After a prime of black, I painted the wheels with silver Createx.
12
June 16, 2023
I want to add details to this engine bay so I'm planning on running heater hoses, a/c lines and brake lines. I started with a test fit. I try to drill all the holes before paint. The heater hoses are tiny, tight springs from spare electronics. I get them from a buddy in the model club.
13
June 16, 2023
More test fitting.
14
June 16, 2023
I ran an A/C cooler and overflow tank.
15
June 16, 2023
Here's the engine bay all painted.
16
June 20, 2023
I've started with the engine details. I made a throttle linkage from spare model parts cut to size.
17
June 20, 2023
I modified the included battery with terminal posts from Model Car Garage.
18
June 20, 2023
After the engine bay was dry, I cut decals out of vinyl and applied them. Then I ran the distributor, from Connkur Model parts. First time I used one, I like it. I also scratch built the brake booster from more spare parts and added brake lines.
19
June 21, 2023
Moving on, I started to detail the interior using thinned out oil paint. I like this method because it makes it real easy to fill the areas of detail on this thin molds. Just dab with the brush and repeat.
20
June 21, 2023
21
June 21, 2023
I gave the dashboard an eerie green light.
22
June 21, 2023
The interior all assembled.
23
June 21, 2023
24
June 21, 2023
The interior tub just doesn't sit right in this body. You can see the difference between the door inner and outer. The key was trimming the front of the interior tub and some of the firewall.
25
June 21, 2023
Getting close. A test fit of the painted parts reveals the chassis has no anchor point in the back of the car. I need to add something here.
26
June 23, 2023
I cut styrene and just glued it at an approximated angle. Fitted the chassis in the way I wanted it to sit, pushing the styrene to an angle that I could glue the two together with.
27
June 23, 2023
Next I used the push bumper included with the kit to bolster the styrene. The angle was just right! I never intended to use the bumper so I'm glad I found a purpose for it!
28
June 23, 2023
Calling it done! Here's the engine bay with the air cleaner.
29
June 23, 2023
Another angle.
30
June 23, 2023
The engine bay with the air cleaner removed.
31
June 23, 2023
32
June 23, 2023
33
June 23, 2023
This is one of my favorite shots!
34
June 23, 2023
35
June 23, 2023
36
June 23, 2023
Thank you so much for taking the time to look at this build. Please let me know if you have any questions!

Komentáre

11 8 June 2023, 02:50

Jv
Looks good
Looks like an old kit what kit is it

8 June 2023, 07:40

Ard S.
Lovely.
I like the wheels

8 June 2023, 08:52

Robert Barkoski
Thank you JV and Ard. It is the MPC Country Charger. It is a little rough so some patience are needed.

8 June 2023, 14:50

Jv
Yes I found mpc kits to be a bit up and down some of them can be very good
I do like the box art on that kit
Got a few 1/16 scale kit from them
Very good value kits
Also very interesting subject's
Love the charger got a few different ones in all sorts of brands
Who dosent love a charger
Yours look cool in the matt black
Looking forward to see what you do whed it

9 June 2023, 02:59

Robert Barkoski
Thanks JV. I'm looking to match the green box art as far as the paint goes. I'm going to prime in white, shoot silver then follow up with transparent green. BTW, I had no idea MPC made 1/16 kits!

9 June 2023, 05:35

Jv
I got the petty charger by mpc in 1/16
Cool car but same as your mold is not the best
I also have the 1979 firebird by mpc
That one I was impressed by
So I bought a second kit
That one is still for sale at my local model shop
The latest 1982 fitebird kit by revell was also boxed as a mpc kit years ago
That kit also looks like a very nice kit
Hens I bugth 2 of them
The Shelby cobra 427
Is boxed by amt/ ertl
Originally an mpc kit
I am sure thay made some more
I found mpc have very well priced large kits
But some are not the best mold
The petty charger is one of the molds that has a bit to wish for
But it is a coll car and a cool kit but sure will be alot of work to make a nice car out of
Your colours sound great looking forward to see how it comes together

9 June 2023, 06:59

István Szücs
Badass! Looking so wild with this red wheels!

9 June 2023, 09:40

Robert Barkoski
Thank you István, I did stop to think about keeping the wheels red. Maybe next time! JV, the candy green was scary to spray with my airbrush. It only pushes 22 Lbs so I have to thin pretty heavy. I made it work though. On to the other stuff. By the way a 1/16 Cobra sounds badass.

12 June 2023, 17:30

Jv
Yes the cobra I a cool kit
But pretty much same as the amt kits in large scale
Same parts count as the 1/24-25 kits
Pretty much same just a bit bigger
Same as the latest 1/8 firebird
Just a big kit
Not like tamiya or fugimi 1/12 kits were parts count is 300-500 parts

13 June 2023, 03:38

Jv
The green came out very nice
I do love the lines of this mpc kit
I got a few charger kits but I think the lines on this kit is a bit better
Sure this will turn out to be a fantastic model

13 June 2023, 04:04

Christian W
The engine bay on this kit (and the older issues) is still not the best part of the kit. But what to so. We have to handle that 😉 I like the idea with this special flag on the roof. Pretty cool. So I'm watching furtheron.

13 June 2023, 04:51

Robert Barkoski
JV, I'm feeling good about the direction this is going in, more to come soon. Thank you Christian. The flag on this car is like a dead horse. Glad I can pull something novel out of it!

13 June 2023, 05:07

Album info

This is the 1969 Dodge Charger I have been working on. I'm going for an aggressive street/strip look.

General Chaos

36 snímky

1:25

Prebieha

Všetky albumy

Zobraziť všetky albumy »