Најважније вести
Robdog
жели овај предмет
жели овај предмет
BÜCKER BÜ-181 BESTMAN ZLIN Z-181 "BASA"/ZLIN C-6 "BASA" VACUFORM CANOPY CORRECTION SET FOR AZ MODEL KOVOZÁVODY PROSTÊJOV/STRANSKY
MH Models 1:72
K72068 2023 Нови алат 3 August, 08:03
Marc Verlot
је власник овог предмета
је власник овог предмета
Het vliegboek van Majoor-Vlieger Firmin Capon Een bladzijde uit de Belgische luchtvaartgeschiedenis.
Belgie in oorlog No. 19
Freddy Capron
2000 3 August, 08:02
Ko Uchiyama
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Colors and Markings of F-105s, Part One Options for 15 F-105s D/F/G Thunderchiefs
Furball Aero-Design 1:48
F/D&S-4826 2022 Нови алат 3 August, 08:01
Илья Гамазков
додао је нови фотоалбум.
додао је нови фотоалбум.
27 20 April 2021, 17:21
Treehugger
Q: Can you glue all the parts together, and still, the missile bay doors will still open and also raise the missile?
Q: Can you glue all the parts together, and still, the missile bay doors will still open and also raise the missile?
21 April 2021, 13:20
Илья Гамазков
Answer: Trumpeter gives two positions of the rocket compartment doors: open / closed. It didn't suit me. Made working hinges and working rods. The details provided by Trumpeter cannot be used. They must be greatly altered. Now everything is glued together and opens (works) 🙂
Answer: Trumpeter gives two positions of the rocket compartment doors: open / closed. It didn't suit me. Made working hinges and working rods. The details provided by Trumpeter cannot be used. They must be greatly altered. Now everything is glued together and opens (works) 🙂
21 April 2021, 14:42
Spanjaard
Impressive, very realistic, and added the movable parts makes it even better
Impressive, very realistic, and added the movable parts makes it even better
25 July 2023, 16:26
Tony G
означио овај артикал као по наруџби
означио овај артикал као по наруџби
MAYBACH-Motor HL 230 P 30 Engine
Rye Field Model (RFM) 1:35
RM-2070 (RFM2070) 2024 Нови алат Мултитема (6)3 August, 07:58
Tony G
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Panther Ausf.G & Jagdpanther G2 upgrade set
Rye Field Model (RFM) 1:35
RM-2072 (RFM2072) 2024 Нови алат Мултитема (2)3 August, 07:58
Tony G
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Sd.Kfz.171 Panther G w/Night Sights and Air Defense Armor & Steel Wheel
Rye Field Model (RFM) 1:35
RM-5112 (RFM5112) 2024 Нови делови 3 August, 07:58
John Foxx
је власник овог предмета
је власник овог предмета
McDonnell Douglas F-4 Phantom II - (long nose versions) Pitot tube
Master 1:32
AM-32-044 3 August, 07:57
Tony G
означио овај артикал као по наруџби
означио овај артикал као по наруџби
60'~70's Vietnam Saigon Shuttle Tricar w/ The Driver & Passengers
Gecko Models 1:35
35GM0111 2023 Нови алат 3 August, 07:56
Skyhiker
додао је нови фотоалбум.
додао је нови фотоалбум.
12 слике
Foke Wulf 190 F-8 (1997 tooling)Нов: 3 August, 02:10 1:72
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
Пројекат: Focke-Wulf Fw 190 F-8
13 1 August, 17:22
Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
2 August, 04:46
Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
2 August, 11:32
Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
2 August, 20:39
Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
2 August, 20:52
Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
2 August, 21:04
Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
2 August, 21:09
Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
2 August, 21:23
Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
3 August, 02:12
Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
3 August, 05:17
Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
3 August, 05:31
Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
3 August, 07:11
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo