Најважније вести
Wouter
ову ставку је означио као робу која се може продати / продати
ову ставку је означио као робу која се може продати / продати
Yokosuka E14Y Type Zero Small Reconnaissance Seaplane 6th Fleet
Fujimi 1:72
72054 (C-26) 1997 Нови алат 21 July, 08:09
Wouter
ову ставку је означио као робу која се може продати / продати
ову ставку је означио као робу која се може продати / продати
B-24J Liberator America's Most Widely-Built Wartime Bomber
Airfix 1:72
05006-3 1975 Нови декали/налепнице 21 July, 08:08
Johan van Meerloo
додао је нови фотоалбум.
додао је нови фотоалбум.
16 9 May 2023, 21:16
Johan van Meerloo
both are interesting, this one is total crap but will try to make the best of it
both are interesting, this one is total crap but will try to make the best of it
28 April, 17:11
Johan van Meerloo
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
20 July, 07:12
Skyhiker
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
20 July, 19:52
Simon
додао је нови фотоалбум.
додао је нови фотоалбум.
2 слике
Spitfire F Mk.IXНов: 21 July, 07:58 1:72
Cockpit schwarz grundiert.
Пројекат: Spitfire F Mk.IX (Group Build)
1 20 July, 21:04
joolsienl
је власник овог предмета
је власник овог предмета
F-35 Lightning II (A Version) `65th Aggressor Squadron´ Limited Edition
Hasegawa 1:72
02420 2022 Нови декали/налепнице 21 July, 07:58
Andrej Bassich
жели овај предмет
жели овај предмет
PzKpfw III / IV Tank Tracks - Type 3a PZ III E-J, Pz IV F-H, StuG IIIB, Nashorn, Hummel after 1941
T-Rex Studio 1:35
TR85018 2021 Мултитема (5)21 July, 07:53
Alberto
додао је нови фотоалбум.
додао је нови фотоалбум.
14 слике
Su-85 3d printed 1/72Нов: 20 July, 21:27 1:72
My first attempt with fired shot
Пројекат: Su-85 3d printed
Scratchbuilt
6 20 July, 16:44
Andrej Bassich
жели овај предмет
жели овај предмет
WWII German
Pz.III / Stug.III Extra stowage box setDef.Model 1:35
DM35113 2021 Нови алат Мултитема (2)21 July, 07:49
Miroslav Vochomůrka
је власник овог предмета
је власник овог предмета
Mi-17 Painting Masks for 1/72 IBG Models and Hobby Boss kits
IBG Models 1:72
IBG72M006 2024 Нови алат 21 July, 07:48
Roland Sachsenhofer
додао је нови фотоалбум.
додао је нови фотоалбум.
29 7 July, 08:59
Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
11 July, 07:09
bughunter
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
12 July, 16:49
Roland Sachsenhofer
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
14 July, 08:57
Roland Sachsenhofer
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
18 July, 11:56
bughunter
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.
18 July, 14:53
Roland Sachsenhofer
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
18 July, 18:15
Ludvík Kružík
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
20 July, 14:02
Roland Sachsenhofer
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!
21 July, 06:54
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo