Најважније вести

Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.

gorby
Nice work so far. Looking forward to this. 🙂

Michael Kohl
Auch da bin ich dabei.

Roland Sachsenhofer
I'm very pleased - appreciated!

bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.

Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.

Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.

Villiers de Vos
Very nice progress.

Roland Sachsenhofer
Thank you for your words, appreciated!

Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.

Roland Sachsenhofer
Now it worked with the upload of the pictures!

István Szücs
My favourite plane from the Great War-era, I'm watching!

bughunter
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂

Roland Sachsenhofer
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....

Roland Sachsenhofer
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.

Robert Podkoński
A little late, but joining the party!

bughunter
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.

Christian Abraham
Great build so far

Roland Sachsenhofer
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!

Guy Rump
Following. 👍

David Taylor
Watching.

Roland Sachsenhofer
That is appreciated as well! 🙂

Villiers de Vos
Very nice detailed work.

Roland Sachsenhofer
Thank you for your comment!

Ludvík Kružík
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍

Roland Sachsenhofer
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!

Dietmar Bogatzki
Wieder ein Meisterwerk von Roland 👍 hau rein 😉

Roland Sachsenhofer
Ich sage herzlich dank für den ermutigenden Kommentar! 🙂

Roland Sachsenhofer
A few steps closer to a finish: working with Roden decals is always an adventure, happy end not guaranteed! The whole thing is spiced up by the corrugated metal nature.... Well, this is the result; I will of touch up up the unclean parts with a brush, but on the whole it will stay like this - now for the signs of use and wear!

bughunter
Brave, brave - with good results 👍
I hadn't even tried those.

Roland Sachsenhofer
Thank you! 🙂
The Junkers D.1 is slowly approaching its final appearance - and that didn't work out quite as well as I had imagined! But what the heck, there are some nice things, like the turnbuckles or the two MGs from Gespatch; I'm also happy with the solution for the typical Junkers handles and footrests: a thin, glued-on metal rod was covered with finely cut Tamiya tape as a ridge. Well. I am satisfied with this overall impression.

J35J
Found this gem on the web. Time for another vacu kit!

Torsten
WOW, very exciting and challenging, I'll be watching

Duster_d
Oh, it's super interesting! I'm taking a seat

Skyhiker
Fun...fun.

J35J
Welcome to the project mates!👍🏻

Alex K
... joining the gallery...

Gordon Sørensen
Following!

J35J
Thanks Alex & Gordon for your intrest!

gorby
Looks like an interesting and challenging project.

J35J
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.

Łukasz Gliński
Brave idea

Robert Podkoński
You're a brave man, indeed! I will follow this thread with pleasure, for sure.

Michael Kohl
Me too

J35J
Thank you everyone for you supporting words! 👍🏻

gorby
Nice diorama.

Oleksii
Thank you)))

CaptGPF
Lovely dio

Oleksii
Thank you 🙂

Palo M
Looks great! One nit: it was still Czechoslovakia in 1990 🙂

Oleksii
Thank you very much, i have corrected

Michael Kohl
Nice. Leaving the surface texture of the foam board for the apron makes it look quite east european indeed. Nice twist. Adding a frame would give this nice dio a bit more of a professional appearance. Just a thought.

Oleksii
Thank you, on my next diorama i would try to find a frame or make it.Do you have any advice for frames?

Michael Kohl
You can make a simple cover for your dio with veneer or plasticcard just cut to size and glued blunt. Quite a few use readymade picture frames. This is convenient. In my opinion two aspects can make it look a bit off: first if the dio is made to fit the frame and not vice versa. And second if the level of the frame is higher than the level of the dio. This can easily be avoided by putting in a higher foam board. Wooden profiles can be cut at 45° angle and fit around the foam. This allows you to fashion any size you want. I have covered irregular shapes with veneer and with simple card board that I varnished afterwards.
Have a look around here. There are plenty of excellent solutions to be found - and a few which show possible pitfalls.
Half a dozen techniques you will find at my stuff (including not so good ones 😉 ).

Guy Rump
Very nice build! 👍

Oleksii
Thanks you very much Michael for this advices.I would give my best and show next on my diorama.( Probaly in 2-3 weaks)

Oleksii
Thank you Guy Rump🙂

Ekki
Beautiful!

Oleksii
Thanks, guys, for your words and likes. I really appreciate it

Roland Sachsenhofer
Yesterday the A.90 Orlyonok thundered in front, here are a couple of pictures of this event! 🙂 I added a few things to the kit, such as the prominent framework in front of the cockpit, which I built "on sight" with suitable wire. I haven't been able to find out what it's for - aerials, windscreen wipers/cleaning? - but I know that it contributes quite prominently to the appearance. I also added the various aerials on the fuselage and engine.
Thanks again for the hint about the 'ironed' water behind and under the engine, that was an important tip and came in time, thanks to Robert!

Robert Podkoński
Looks absolutely perfect, Roland! Chapeau bas! (I am happy that I have contributed a bit to this effect 😉 )

gorby
WOW! Fantastic display!

Neuling
WOW! Fantastic display! 2

Roland Sachsenhofer
Thank you for your appreciated comments - it is of course very motivating to receive such feedback!

Guy Rump
Excellent as usual! 👍

Skyhiker
Did you use magnets to make it float?

Villiers de Vos
Beautiful work and effects.

Roland Sachsenhofer
Thank you very much mates! In fact, the A.90 'floats' on two fine metal rods; I apologise for taking the freedom to wipe them away with the image processing.

macopter
Sieht sensationell aus! Die Wassernachbildung ist ... whow!!!

bughunter
What a beast! Great display.

Martin Oostrom
Gorgeous build Roland. Magnificent result.

jan zumack
Cool, i build the big brother, your water Looks realy good. Nice work

Roland Sachsenhofer
Thank you for your motivating and positive comments! Makes me, well, mighty proud! 🙂

Mr D
It's good 👍👍 looks inaction n right 👌

Roland Sachsenhofer
Thank you mate!

Roland Sachsenhofer
.....and thank you all for your "likes"!