Најважније вести

Guy Rump
Following with interest. 👍

David Taylor
As above.

Alec K
Me 3 👍

Живко Джаков
Guys, thanks for your interest. The model is great and I hope it doesn't take too long to build.

Ben M
👀

Duster_d
A cool model, it's very interesting to watch the build! I have an old Stirling from Airfix in my stash. Someday I will decide to build it 🙂

gorby
I love the Stirling so I'll follow as well. 🙂

Ben M
I just finished a book on shorts aircraft, very interesting.

Живко Джаков
I hope he becomes a good model. I'm starting to think about his stash. B-29 is ready. C-130 Hercules, He 177 and Catalina are waiting for me. Everyone wants a lot of space.

Nagy-Meszler Csaba
I'll be watching 🤩

Finn
Looking good, will follow

NLAWScametovisit
love it. following

Живко Джаков
And Edward are not without fault. Sterling's masks are missing shark fin pieces.

Живко Джаков
Oops. It's my fault. I'm working with the wrong kit. I will order new ones. The project will be put on hold for some time. Guys, I'll signal as I continue.

Graf
Youtube Video не той масштаб,але можливо в дрібницях допоможе

Живко Джаков
Apart from the scale and the plane, it is different. If I make one I'll need a hangar for him and me when we get evicted from home.

Nicolas
I'm joining the fun.

Graf
Рано чи пізно, це станеться. Отримуйте задоволення від хобі, але майте шляхи відступу.

Живко Джаков
I have a backup option. I'll just wait a bit to order the correct masks.

boywellum
Hi thanks for this, great work.I have one myself (I have almost every RAF aircraft from WW2), I only started in September though, so the PE on this I find confusing in some circumstances. When I build mine would you mind if I asked you a couple of questions? Cheers R

Łukasz Gliński
Cool project 👍

Живко Джаков
No problem, boywellum. Thanks Łukasz.

J35J
Great progress!👍🏻

Torsten
Some progress

Michael Kohl
Pics are a bit blurry but still hint at a more than decent figure painting job.

Torsten
That's right, my typical wip pictures on the side. Thanks for your compliment

Nicolas
Oh, I loved MacBest. eems like a freat work.

James C
Nice looking builds 👍

Villiers de Vos
A nice collection. Thank you for sharing.

Mathias Decommere
Very nice collection indeed!

Guy Rump
Very nice collection. 👍

Recce 4-6
Thank you.
When I first started looking into the Vietnam War, I didn't think tanks played a big role. But there was more to it than „taking long walks, and always looking for a guy named "Charlie"

Lost_Erik
Great collection 👍

Neuling
Very interesting theme park with good builds!

Thomas Kolb
This Fulcrum looks great! Keep it coming! Did you find out what was the reason for the problem with your airbrush? Have you tried replacing the silicone seals in the nozzle? If they leak in even just a very small amount of air, everything goes wrong.

Cristian A
Good morning Thomas!

Thanks, I hope I will finish the Aggressor Mig-29 over the following days, it has a very nice decal design.

The airbrush problem was complicated, it was initially clogged (I'm blaming Humbrol acrylics for that, I always take good care of the airbrush and clean it after each spray) and while trying to clean the nozzle with a needle I enlarged the nozzle head bu mistake. I changed the nozzle and needle and the airbrush sprays beautifully now, decided on using Tamiya/MRP and Vallejo paints for the new projects.

To get to the root cause of the problem I still need to use the old needle in the new nozzle and the old nozzle with the nee needle, as a needle can be bended without easily noticing.

Nicolas
Nice progress so far, following.

Cristian A
Thanks Nicolas, welcome!

André Silva
Outstanding job on the fuel lines. I made them a few times but now I use aftermarket ones, yours are perfect.

hiveloc
Thanks André! Lots of bending and testing as you know. I'm getting myself ready for the slat armor construction, and will definitely go with your tip of making a jig. I've been following YOUR T-62 build, and your anti-radiation cladding on the turret is awesome!

André Silva
Thank you hiveloc. I'm now (with a pinch of salt) placing the turret slat armor supports. When it's done (hopefuly correctly), i'll share their detailed placement locations by lenght and height, so anyone trying the same build won't have the same trial, error and elbow grease experience. Also following your build.

hiveloc
The turret slat mounting is going to the top of my NOT FUN list! I had a sheet of paper full of measurements and helpful tips from @André Silva, but I still ended up spending too much time testing and fitting everything in place. An unfortunate tip-over during construction had me re-attaching some of the parts- sigh.

John
That slat armor looks cool, but also like a heck of a lot of work.

Cortex
First time seeing the Voyager Slat Armour set being built, truly daring build and also inspiring.

hiveloc
Thank you Cortex! The slats were a real pain- Voyager's instructions are lacking and just plain wrong in spots, and I have a long list of gripes on the construction. I'm hoping that the side panels will mount up without too much trouble since I had to get well into the paint stage before I can do that. Keep an eye on André Silva's build, I think his slat armor is going to end up way better than mine!

André Silva
Thank you for the kind works about my slat armour @hiveloc but it wont be better, you nailed yours, I fumbled mine,. @Cortex in that respect should follow your build which is looking better and better, it's going to be a doozie!

André Silva
Fantastic work, the slat armor and supports are perfect, the camo is spot-on.

hiveloc
Thanks for your always-kind words @André Silva! I should be finishing up here soon, this one has been a ton of work for me.

hiveloc
done! (?)

Neuling
Done. Well done. Very well done. Everything just fine. It really looks like a ton of work.

gorby
Fantastic dio!

Rui S
Great work allround 👍

hiveloc
Thank you all! Definitely a ton of work @Neuling as you know from your dioramas- it was an exercise in patience for myself. There are a few flaws, but I am happy with the results.

EnsignExpendabl
Following. I built one of these (from the set with three ships in it) a very long time ago.

Torsten
Thank you for your interest 🙂

Donald Dickson II
A kit I once had and never got around to building. Interested in seeing how it comes out.

Torsten
Thank you Donald, I will do my best to give it a vintage look 😉

Torsten
The shell is finished, next step will be add some putty

Marcel Klemmer
Very interesting Torsten I am in.

Torsten
Thank you Marcel 🙂

Ben M
I built the kit with 3 when I was a kid. I remember being happy how the romulan decal came out on mine. Hope you have fun with it too!

Torsten
Thank You Ben 🙂

Torsten
Next step, gap filling, my first contact with Perfect Plasty Putty. I really like it 😎

Torsten
THX for the like Villiers 🙂

Torsten
THX for the likes Peppy and JD 🙂

John Hughes
Had one of these years ago. If I ever do it again, I'd be very tempted to light it.

Ben M
Perfect plastic putty is a lifestyle for me.

John Hughes
Correction to above post: Now I have one of these again, I'm very tempted to light it. (Just grabbed one from Timeless Hobbies for £19.95)

Torsten
@John: I look forward to your project and thanks for the like and the tip for the glider

Torsten
I love Perfect Plastic Putty Ben 😄

Robin (WhiteGlint)
Super smooth surface. Always interesting to see some vintage kits popping up. 👍

John Hughes
I'm not a fan of the new style stand as it required punching a hole in the bird decal. At least the old style stand is still included. It might have been a better idea to redo the old one in transparent plastic.

Torsten
Welcome White 🙂

Torsten
About the stand I have not yet thought John, let's see

Torsten
THX for the like Michael 🙂

Torsten
THX for the like James 🙂

Torsten
THX for the like Dietmar 🙂

Torsten
THX for the like Christian 🙂

Torsten
More progress, putty, putty, putty ....

Ben M
👍

Nicolas
Joining