Најважније вести

Alberto
Very nice, great details! Following 👀

ALBERTO ITURBURU HERREROS
Thanks alber

Spanjaard
nice!

Ignacio von Braun
Is from FMM workshop?

Doubtingmango
Just found this. Fantastic work! The painting is beautifully done

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂

Roland Sachsenhofer
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂

Juergen Klinglhuber
Ju86 just left the paint hangar,...

Alec K
The metal finish looks great, has nice variation to it 👍

Thomas Kolb
I agree with Alec, the metal surface looks very realistic in the photos!

Cuajete
I agree with Alec and Thomas. Great metallized! 👍

Juergen Klinglhuber
Thank you Alec, Thomas & Cuajete. When I had finished I thought: "Grab, overdone. This bird was for sure not that worn as it went to the airshow more or less fresh from the manufacturer." But the more looked at it the more I was okay with the result. So your comments are welcome and soothe my concerns. 👍

Nicolas
Don't worry Juergen, even on new airplanes there are sometimes clear visual differences in the sheet metal. For example, some manufacturers deburr the rivet holes with a grinding machine, the sheets are made of different alloys or are applied with different rolling directions, all of which have an influence on the appearance. I like it.

Juergen Klinglhuber
Thx Nicolas !!

Juergen Klinglhuber
DONE.
Uploades some pictures of the final result.

Robert Podkoński
Great job, Juergen!

Guy Rump
Great result! 👍

Duster_d
It looks wonderful! Well done!

J35J
Wow! Great build and paintwork! 👍🏻👍🏻👍🏻

Curatorm
Awesome!

Łukasz Gliński
Brilliant, love that shiny shading 👍

William Joel
Very nice. Neat additions. Thanks for sharing.

Nicolas
Very nice result. 👍

Cuajete
Very nice job. Fantastic result.
Congrats!

Moreno Baruffini
What a beauty! Superb result!

Alec K
Excellent build 👍

Juergen Klinglhuber
A very big "Thank You" to everyone for your positive feedback. My stash still contains of further bare metal birds - this comments give definitively good motivation. 👍
cheers.

gorby
Beautiful work!

Bernd Grün
Very nice result, Jürgen! 👌 I like your paint job very much.

Neuling
Same as Bernd!

Roland Sachsenhofer
A really great and very nice result, Jürgen - I think your whole project is really worth seeing - I also like the photos very much! Congratulations!

Juergen Klinglhuber
Many Thanks gorby, Bernd, Neuling & Roland. Much appriciated comments 🙂

bughunter
Good to see an interesting aircraft finished in a nice livre 👍

Juergen Klinglhuber
Thx bughunter - I am looking forward to bring back on the bench my #2 Ju86 in a camo scheme...

Zbynek Honzik
Beautiful result in unusual livery! Very interesting.👍

Robert Podkoński
Taking a seat, of course!
(Perhaps the transparencies and propellers from this kit would work:
Soviet Tu-2 Bomber (HobbyBoss 80298, 1:72))

Thomas Kolb
Thank you Robert! The three-bladed standard propellers in the kit are actually fine, it is the transparencies I am a bit worried about.

Łukasz Gliński
Me 2, must watch this - wondering how good/bad this kit is

Dave Flitton
Watching!!

J35J
Me 3, this will be another great build to follow.

Cuajete
Me 5!
I still don't understand why they haven't released a more updated tool for this model yet.

Moreno Baruffini
Thomas, you are a specialist in reminding me the models I started and non finished (yet)! Super inspiring, and a great build to follow for sure!

Thomas Kolb
Dear friends, thank you for your interest. I am a bit curious myself how this model will turn out - I have read some pretty nasty things about it in reviews, but I am not sure it's so bad. It certainly looks very intricately designed, not your usual shake 'n' bake kit for sure.

Gergő Takács
Thomas, you are doing always the same project what I want to do in the future with the same kits. 😀 I'm always taking a seat and save your work for motivation.

Finn
I'm in

Łukasz Gliński
Thomas, your tutorial is priceless! 👍

Ludvík Kružík
Description and photos of the model construction can be found here: Avia BH-10, first production run - WIP | Album by KLuK (1:48)

Bruce Huxtable
Skvělá sbírka, Ludvík! Opravdu, jsi šikovný modelář!

gorby
Lovely little model! It's nice to see something different on Scalemates.

Neuling
I agree with gorby.

Ludvík Kružík
Thank you for your kind feedback. I really appreciate it and I'm glad you like the Avia. 🙂

I plan to expand my Avia collection with more models in the future. For now, however, I intend to move closer in time to the present and focus on more modern machines.

Ludvík Kružík
Thank you all for your thumbs.

Alec K
I love it 👍

J35J
Great work and collection 👍🏻

Robert Podkoński
Fantastic job as always, Ludviku! I love the family album!

TH SCALE MODELS (Thomas Haberl)
Nice result my friend! You did a great job on this 👌👌👌

Ludvík Kružík
Friends, I'm glad you like Avia, and thank you for your kind reactions and likes. 🙂

bughunter
As usual, you have brought this project to a good end - a very nice addition to this collection 👍

Ludvík Kružík
bughunter thank you for the kind post, I appreciate it.