Најважније вести

Nicolas
I got mine 3 weeks ago. Following with great interest. Looks good so far. 👍

Guy Rump
Looking good, following. 👍

DerMattes
Following, looking very good so far!

Cuajete
I got D version this week. I also follow it with interest.
Fantastic job so far!

Oliver
Following with interest. Got mine in stash. Looks good, by the the way 😊

Ferenc Sarka
What a precise work!

Vincent
Thanks!! It's a pretty fun build and great to see that more of you will build this one.

Ekki
Following too

Cuajete
Very nice painting job 👍

Nicolas
Great result. 👍

Mark Sherwood
Liking the cockpit Vincent, great detail and finish.

Rando
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.

I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.

Oleg Bogolei
Nice idea and intersiting projeact. Also have two of them in a stash)

Freak
Great idea for a double build. Following!

Rando
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.

Urban Gardini
Now this seems like a build that I've to follow!

Rando
Welcome Urban, happy to have you! "It's only a model!"

Sergej I
Following 🙂 👍

Rando
Hi Sergej! I'm very very excited to get started on this one

Casey Beckett
Following - got 3 of those nice new Sword RF's in the stash.

Jos Jansen
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...

Patrick Hagelstein
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!

Rando
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...

Rando
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.

David Fuller
Following

Rando
Welcome David!

I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well

Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.

Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.

J35J
Great attention to details Rando! Following👍🏻

Rando
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.

Rando
All the interior parts are in, soon time to put the fuselages together 👍

Guy Rump
Looking good, following. 👍

Rando
Hello Guy, welcome 😊

Fuselages are together. Now getting all the panels and gear bay doors to sit flush.

Calvin Gifford
Very nice! How is the Sword kit so far??

Rando
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison

Calvin Gifford
👍

S M
Double build! Following!

Rando
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.

Casey Beckett
Backup RF-8 inbound Rando ! Shipped Friday!

Rando
You the man Casey! Did some scratchbuilding tonight

Casey Beckett
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.

Rando
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.

Rando
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.

Calvin Gifford
👍

S M
Clear parts look good 👍

Michael Kohl
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.

Rando
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.

Rando
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets

Calvin Gifford
Whoot!

Nicolas
I missed this one, following. I love these side by side builds.
Great progress so far. 👍

Rando
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.

Thomas Kolb
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!

Rando
I've painted the undersides of the CVW-16 birds. Unfortunately I did something stupid, something I even decided against at first--I tried doing a "pour" into the intakes to get them painted. This was a bad idea for the RF-8 in particular. I thought that since they were glued together I could get away with no leaks, but I saw the paint level draining, and I knew the paint would appear inside the camera windows. Lo and behold I saw paint when I peeked under the masks.

Feels horrible that I did this, even if I have some ways I could fix them. I can pop the side windows out and clean the bottom side windows, but putting them back in will be a pain since the side windows are meant to be attached from the inside. UGH. Any clever ideas to fix this mess are welcome, this is definitely one of those "mojo killers."

Rando
Think I fixed the windows. The bottom windows will still be a little smudgy. But I was able to get the sides back in by gluing a toothpick to the mask and rotating it from the inside, then seating it on the frame.

Neuling
Interesting vehicle. Well done!

Ken Chitose
Thanks 〜

Cortex
beautiful work, I like this line of kits from Hobby Boss

Sy Bar
A builds of firsts, my first Helicopter and first use of 3D decals. Turns out the kit was originally a HobbyBoss kit and looks great nice details and combination of fine panel lines and rivets where need, I have high hopes for this build. 🤞

Villiers de Vos
Coming along nicely. That 3D interior set looks beautiful.

Sy Bar
Cheers #Villiers, the 3d decals are fantastic and really elevate the tubs to a new level.

First real issue with the kit is the fit of the main body, it does not want to join easily and I can find a cause but most can be fixed by gluing a small section at a time and working down the body.
However the bottom section is far too narrow for the kit bottom part, creating large hangovers. This may suggest the bandy has a warp in it but this is modelling not assembly.
I've added a stretcher of sprue to force the side apart hopefully this will help and not cause more issues later.

Sy Bar
Another sort of issue although a little troublesome rather than true issue.
The instruction contain a couple of templates for both inner and outer glass masks (a great idea I wish more kits had). However they are way under scale, I resorted to old skool and used Tamiya tape and fresh blade with bright light behind (phone light 😁) and cut my own.
While right this it occurs to me they may be 1/72 scale and were not rescaled to 1/48 will check later.

Jens J.
It was not a Hobbyboss kit. It was a Special Hobby kit.

Sy Bar
Great spot #Jens J it is indeed Special Hobby plastic, my apologies to both Special Hobby and HobbyBoss for the confusion.
Just completed a HobbyBoss and had them on my mind, this would be an excuse if the sprues where not so well labeled and on the Quinta 3D decals 🤪

Sy Bar
The decals have been interesting. The look great and are nice and thin. I normally apply a gloss coat then decals but reading/watching so much about how this is not necessary I tested this out on an un-required decal and it appeared to be true so I pressed on without a gloss coat. They went down fine however for the first time ever I got some silvering and I'm not sure if I did something to cause it or not. So I glossed coated them and the rear tail half then applied the remainder and not issue of silvering, guess I'll be continuing with a gloss coat 🙄

The hardest decal was the shark mouth very tricky but going slowly I just about made it

Sy Bar
I thought the decal shark mouth was the hardest thing on this build, wow was I wrong…
It's the open canopy's they are but jointed and there not that much surface to but them either added to that the struts are so finicky to place makes the whole process a right royal pain in the butt. In the process of fitting the pilots front canopy strut it pinked off to another dimension. I did my best to make something similar but I sort of wished I'd buttoned it all up 🤔

Sy Bar
Decided to leave heavy weathering until/if I combine with other vehicles and figures in a diorama to ensure the weathering is consistent with in the scene.

Miguel Vaquero
Beautiful model mate!!

Villiers de Vos
Very nice work.