Најважније вести
Eddy Marshallдодао је нови фотоалбум.
10 4 October, 12:13
Clair GreenwoodPrecision approach, Im loving it. Is that putty around the bogies to hull fitment? Just curious 🙂
4 October, 15:17
Eddy MarshallCheers Clair... Just for fitting to the hull... The connections between the running gear and hull are extremely loose... Not to mention the rocker arm assemblies have a tendency to be misaligned... Just mocking it up at the moment and see where I need to shore things up... Happy modelling...
5 October, 01:25
Clair GreenwoodAhhh ok, doing it the smart way, thats something I probably wouldn't think to do.
5 October, 01:37
Bozzerје власник овог предмета
5 October, 23:32
Nigel ChapmanYep found it. Well done. It's amazing what you can find but those days are getting fewer
6 October, 08:30
BozzerTotally agree mate. But I've noticed things on eBay are getting cheaper too. Good for buyers, bad news for sellers
6 October, 16:15
Ricardo Reisдодао је нови фотоалбум.
42 1 October, 22:43
Alexander GrivonevOh that looks amazing, so much variety in color and little details, great markings. Beautiful paintjob and subtle weathering as well👍👍
2 October, 06:17
Marc Verlotје власник овог предмета
Luchtgevechten boven Belgie 1941-1942 De Luftwaffejagers tegen de britse en Amerikaanse luchtmacht
Belgie in oorlog No. 5
Cynrik De Decker|Jean-Louis Roba
1994 6 October, 16:13
ICM 1:48
João Mouraдодао је нови фотоалбум.
10 слике
Zvezda 1/72 Soviet Army M4A2
1:72
Пројекат: Zvezda 1/72 Soviet Army M4A2
9 6 October, 00:11
Felix Troschierжели овај предмет
Cockpit for SE 535 Mistral (french version of the DH Vampire)
Azur et Or Miniatures 1:72
72007 2021 Нови алат 6 October, 16:12
Dominik Weitzerдодао је нови фотоалбум.
8 слике
1965 Shelby Mustang GT 350 H (blue)
1:24
Пројекат: 1965 Shelby Mustang GT 350 H (blue)
11 6 October, 10:37
Martin Oostromдодао је нови фотоалбум.
13 слике
WIP - Witch in law mobile
1:32
Assembly underway. Not a lot of parts
Пројекат: VW Beetle for the witch in law
10 9 September, 14:26
Martin OostromAs an in between, hidden behind the Köln truck, build.
Making it for my mother in law, who used to drive one in the 70s.
9 September, 14:31
Dave Ohlerову ставку је означио као робу која се може продати / продати
Цена још није достављена
6 October, 16:10
Paskову ставку је означио као робу која се може продати / продати
MB 339 P.A.N. G-91 P.A.N. F-86 Aerobatic Teams Collection
Italeri 1:72
1297 2010 Нови делови Мултитема (3)Цена још није достављена
6 October, 16:09
J Dдодао је нови фотоалбум.
45 слике
Panzer III Ausf. J (Tropical version with Spaced Armor)
1:35
One more Finished!
Пројекат: Pz.Kpfw. III Ausf. J (Tropical Version)
18 12 June 2022, 14:34
DuperScaleдодао је нови фотоалбум.
38 11 July, 21:06
Chris ParsonsOh ya!
Built a couple of Broplan vac kits, a real challenge but great for the feeling of overcoming a challenge and creative accomplishment
11 July, 23:27
Thomas KolbOMG, what a challenge! 🙂 Those panel lines look quite uneven, will you try to rescribe them or just take them for what they are? In any way, I am super curious how these sheets of plastic can be turned into a model, so I will watch with interest!
12 July, 02:31
DuperScaleWelcome mates, the panellines are aweful but the material is so thin, i'm scarred that i cut right trough it when i try to rescribe them.
12 July, 06:24
NicolasFollowing. Got my first vacu kit this weekend. I hope I can learn something here.
16 July, 14:48
Chris ParsonsHi DuperScale, I built a couple of Broplan vac ATR kits, converting one 72 500 to a 42 300. A few pics of the work in my "albums" if you're interested in the kind of model you can achieve from a Broplan kit with a bit of work…sweat and tears, foul language, alcohol and time….
16 July, 23:24
TreehuggerDuperScale, how about scribing into a layer of primer paint?
This way, scribing should be a lot easier afaik, scribing into the primer layer of paing, and not plastic.
This guy on youtube did this, on regular plastic models though.
20 August, 05:21
TreehuggerAs for the clear parts, I wonder if it could be done this way
1) Cut out a square/rectangle shape, removing the oval form from windows. The larger the hole the better, to create some extra space around the old window shape. Enough space to work with putty later on.
2) Glue in a flat thin strip of transparent styrene on inside of model.
3) Glue in a square/rectangle shape transparent styrene, outside the model, laminated with the existing strip of transparent styrene on inside, so double layered.
If keeping the new window parts larger than the old window shape it should be easier to use some putty after adding masking tape that have the shape of the old windows. The larger these new outer square/rectangle window shapes are, the easier it is to add putty to create a smooth surface, then hopefully the center part is clear enough, to mask off the final shape of the old window shape, before painting.
Afaik a common issue using Mikro Kristal Klear is that you can't sand the clear part afterwards, because the clear part is like rubber iirc. You can iirc easily remove this clear part though, just poke/pull it out. Unsure if there would be any residue left after removing the rubber like liquid clear stuff after it dries.
20 August, 05:25
TreehuggerAnother thing one could do with clear parts an idea:
1) Glue in a long strip of transparent styrene on inside of plane.
2) Add some kind of epoxy or something that can be sanded, without the epoxy damaging the underlying transparent styrene.
3) Idea is to use the liquid stuff to fill in the perfectly shaped holes for the windows, then sand the liquid stuff flush after it dries.
What won't work imo, is doing multiple rounds of adding liquids to create some goo that goes transparent. I think if you sand this stuff multiple times adding more liquid stuff, you get a flawed result I think. I tried something like that with gloss varnish, trying to build up a solid clear shape. Did not work as expected.
20 August, 05:35
TreehuggerIn this thread, and in photo #13, the guy apparently put tape outside, and poured clear resin on the inside to fill the window holes. Unsure if such resin will react and maybe eat up or warp any thin parts ala vacuum kits. I guess this can be tested with some scrap plastic if having some piece left over.
Boeing 737-530 Smart Wings 1:144 | Album by Zbynek (1:144)
20 August, 07:35
Łukasz GlińskiThe UV transparent resin is usually sandable (to some degree), maybe that might help?
Similarly to Treehugger I'd reinforce it with a transparent styrene from the inside of the fuselage anyway.
Or you might leave the windows open and fill them with Kristal Klear after painting - this is what I did on my Jetstream, Avanti & Yak-40. But if you want to seal it with gloss varnish, remember to keep very thin layers (guess how I learned it 🙂).
[img1]
Blue Jetstream (SP-KWN) | Album by Woody (1:72)
Avanti! | Album by Woody (1:72)
20 August, 07:59
DuperScaleHi, thanks for the input mates. I'm quite happy with the kristal clear on the small windows and i think i do it like Lukasz said. After everything is done i do the windows as the last step.
The windscreen window could work but i think i used little to much of the kristal clear.
20 August, 16:10
Mr DLike the cockpit..👍
Lots of work but doing a 👍 job... Be rewarding when done.
17 September, 20:48
J35JThe kit is coming together very good. You are skilled and brave!
Great to follow the journey to see the final result. 👍🏻
30 September, 19:28
DuperScaleThanks for the nice comments, from far away it looks good but the fit, lack of detail and scale problems are really annoying.😅
6 October, 14:37
NicolasThat's the main reason why I've never dared to try a vacu kit before. I've learned a lot from you. Looks good so far.
6 October, 16:08
Erik Torpје власник овог предмета
Figure Conversion set US Special Forces Iraq / Afghanistan
Verlinden Productions 1:35
2473 6 October, 16:06
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo