Најважније вести

Sergej I
Watching! Top riveting there, looks very exact and well cleaned after 👍

Tony Tonov
Great start, taking a seat 👍

Harald Besold
Impressive start! I'm really looking forward to the following photos.

Neil Patrick
Following. for sure. This looks like it will be epic!

DerMattes
Following 👍

Dave Flitton
Watching!!!!

Romain Sablou
Thank you ! Welcome aboard the Milk Run Special 😉

gorby
Remarkable work so far! Very impressive riveting.

Alec K
Taking a seat in the classroom 👍. What is happening in picture 8?

Живко Джаков
Following

Romain Sablou
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again

Alberto
Very promising start, I'm in!

Fabien
Wow impressionnant. super beau boulot

Alec K
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍

Guy Rump
Looking great, following. 👍

Romain Sablou
Thanks mates !

Et merci Fabien 🙂

Eric Thornton
+1 following

Guy Rump
Watching. 👍

Thomas Bischoff
watching too 👍

Christoph Kunz
Awesome! 👍
Taking also a seat.

Nicolas
Great work so far, following

Gary Victory
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.

Romain Sablou
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌

Jakub Fiala
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.

Romain Sablou
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌

Dietmar Bogatzki
Fantastic riveting job and also the wash 👍

Alec K
Outstanding progress 👍

Romain Sablou
Thanks guys, glad to finally paint something after all this preliminary work !

Pietro De Angelis
Impressive work, congrats!

Bernhard Schrock
Great work especially you very exactly riveting job. Chapeau.

Jakub Fiala
Great progress, beautiful details!

Alec K
Superb work all around 👍

Mike Siemers
I'm in, can't wait to see the finished kit. Great job on the interior.

Romain Sablou
Thank you all for following this project 🙂

CaptGPF
Same with others - looking great!

Finn
Following

Tzonglin Wu
It is so incredible. Following.

Spanjaard
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!

Romain Sablou
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏

Alex Rakhimgulov
Outstanding project!

Dave
Beautiful details, this is looking amazing

Kim Branders
Good work. Grtz Kim.

Es-haq Khosravi
Great job!

Rui S
Thank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...

Rui S
Kim, Coming from an real Expert in the subject like you, is a great complement, Thanks.

Kim Branders
I'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.

Kim Branders
I meant hobby😉

Rui S
HeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.

Marko Paakkanen
Very nice tree !😉

Nice dio coming!

Rui S
Thanks Marko. Yes a small one that also died early...

Donald Medley
Love your base

Rui S
Thank you Donald, the finished one is in the photo19

Tim Heimer
I love the detail work, just awesome!

Rui S
Thank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉

Donald Medley
You'll love working with oils, trust me

Fabian D.
Your solution for the Zimmerit is genious. Nice finish aswell.

Donald Medley
Very nice indeed

Rui S
Thank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...

Tim Heimer
Hey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking

Rui S
Agree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...

Rui S
Some ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...

Wesley De Braekeleir
Ubercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉

Rui S
Thank you very much for your nice comments, mates.
Much appreciated :
)

CaptGPF
Damn Rui, that camo pattern is wicked! The mud effects are also impressive!

Mr James
I agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?

Rui S
@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated

Mr James
Ah, its a Bonsai tree. No wonder it looks so good. 🙂

Rui S
I'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...

Alec K
Nice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍

Doubtingmango
Great job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!

gorby
Good to you back modelling Rui.
The horse looks great.

Rui S
@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉

CaptGPF
wow! you aren't horsing around (pun intended)! They look amazing!

Rui S
Thank you for your comment CaptGPF, Glad you like my hors ing 😄. Apreciated

Landlubber Mike
Nicely done!

Desert Marlin
Looks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!

Ben M
I hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.

Kim Branders
Rui, the horse looks amazing.

Rui S
@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.

bughunter
I'm not really into tanks but that is a great looking horse 👍

Rui S
Wow, this is an unexpected comment. It's always great to receive a compliment from a Master. Thank you so much for stopping by and for those encouraging words. Appreciate it.

Ben M
Did you give the horse a dark wash around the tendons or post shade?

Rui S
Hi Ben, If i reacall corrctely, I gave a little bit of both, sarting with a black primer, overal coats with oils leaving those spots almost unpainted or with less coverage.

Angel Yovtshev
These horses were a nice surprise, Rui!

I'm currently fighting the harnesses of a two-horse team pulling a gun carriage(it's a hard fight- I can tell you!).
Your reins look splendid!

Cheers,
Angel

Pietro De Angelis
Damn, what a gestation this work has had,
it gives me hope that sooner or later I too will finish something!😅
Congratulations for the scene and for what you managed to do with that old Elefant, the horse is wonderful!
Admiration and respect

Desert Marlin
Very well done! Keep it up!!!

Rui S
@ Angel Yovtshev, Thank you for stoping by. Mate Your comment was also a nice surprise to me. Apreciated. I'm sure that for a master scratch builder like you, the harnesses will be a piece of cake. Looking forward to see it.
@ Pietro De Angelis, Thx a lot for you praise, really Apreciated. But you are right and If you would know the century I started the Italeri kit... 😄 I'm a slow modeller wich fails to keep the Mojo high for long periods, so, it's nice to make a few more steps to conclusion. I'm glad you like my work on the Elefant and horse.
@Desert Marlin, Thx again for your suport, it means a lot to me. I'm sure you noticed that i've followed your advise and gave it a soft overcoat of satin Varnish on the upper or most exposed surfaces 😉

Desert Marlin
I did indeed notice! Bravo!

Gary Victory
Really nice progress Rui. Impressive work on the soldiers camo.

Bohrmann
👀 Front seat.

Nick N
With every photo the model looks more awesome, looking forward to the results 🙂

Maciej T.
Thank you 🙂 I try to show each stage of work - maybe someone will benefit 🙂

Nick N
Btw, did you place the tow hooks/zughaken (Youtube Video) upside down on purpose?

J35J
Great start on the Buc! Following

Villiers de Vos
Very nice work on the cockpit.

Gary Victory
Very nice work.
Looking forward to the rest of your build.

Jennifer Franklin
Nice start. Following

Jungwon Lee
Thanks mates!!!!

Gary Victory
Really nice work on the Buccaneer Jungwon.

Desert Marlin
The REEDOAK 3D Printed Pilots are awesome!

Desert Marlin
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...

Desert Marlin
Have to pause this one until I get the BIG ED kit #33216...

Treehugger
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂

Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.

Desert Marlin
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!

Desert Marlin
Great video of the weapon that goes with this version of the Mirage 2000N

Youtube Video

Desert Marlin
Time to return to the 2000N... Let's Nuke something!

Desert Marlin
I got the ResKit Mirage 2000N Cockpit Set (Detailed Version).

Desert Marlin
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…

Desert Marlin
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.

Desert Marlin
Okay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!

Desert Marlin
I'm back to it!

Treehugger
Oh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.

Desert Marlin
I'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...

Eric Thornton
Looks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.

bam-models.com/produ..2000-corrected-nose/

Desert Marlin
Thanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!

Mr D
Like it 😀👍
Nice when the pilot looks like he's actually doing something and engaged with the craft.

Desert Marlin
Thanks. It's really sad to remove detail from the ejection seat, but that is the only way to get the pilot in place...

Ben M
The pilot looks amazing.

Desert Marlin
The pilot is from REEDOAK. They have several different figures in various poses so the realism can be developed based on the aircraft scenario. This model is being build to represent events just prior to engine start.

Desert Marlin
Remaining cockpit items:
1. Glass
2. Decals on seats
3. A little more weathering
4. Fix pilot's France Flag
5. Add WSO's Right shoulder patch
6. Check that I can get the canopy actuators in after everything is assembled...
7. Add HUD glass

Martin
Cool project! I have my Popcorn ready, so I'll follow closely!

Laurent VILLANUEVA- "HELLER ForEver"
great

Mr James
Great detail

Desert Marlin
The glass and HUD went in great! I had to lightly sand the edge of the glass to get it to fit snugly into the ResKit frame between the front and back seats. I used 1000 grit and lightly buffed all the way around the edge. Fits perfectly!

Desert Marlin
Cockpit is done! Looks like the ResKit cockpit tub fits perfectly! Lots of trimming to get the crew in the proper fit. Right now, I think it's ready for final checks before fuselage join. The forward control panel needs some sanding for fit, but it does work. I have left the seats, pilots and control panels loose until final fuselage join just to have "wiggle room" before closing. I was able to adjust the forward control stick to make it match the pilot's hand more closely. Just need to check a few more things and then join the fuselage halves!

CaptGPF
The pilots are only as good as the paint job - which is AWESOME!

Desert Marlin
Thanks Mate!

Guy Rump
Looking great, pilots are outstanding. 👍

Desert Marlin
Thanks! I can't believe this version of the 2000 is so "old"...

Mr D
Going to be a beauty 👌😃👍

Desert Marlin
Started cleaning the canopies…

Desert Marlin
Got the frames for the canopies!

Laurent VILLANUEVA- "HELLER ForEver"
attention aux couleurs sur les notices kinetic etc , certaines sont fausses!

John
Following with interest! 👍

Desert Marlin
Laurent: Oui Monsieur!

Dave Flitton
The pilots look like they are impatiently waiting for you to finish the aircraft so that they can fly!

Paul Eden
Cockpit and figures are next level. Excellent.

Desert Marlin
I got the canopy frames in the mail. The "detchord" in the forward canopy is perfect!

Mr D
Done a really smart job on cockpit n pilots 😁👍
It will be show peice of the Aircraft so worth the effort,
Did you have decals for the green display screen's ??

Mark Sherwood
Cockpit and pilot and nav/weapons, exquisite.

Desert Marlin
Screens are aluminum paint with clear green over the aluminum.

Gary Victory
Very nice work on the cockpit and pilots.

Gary Victory
Really nice build and finish Shane. Top Job Sir.