Најважније вести

Roland Sachsenhofer
These pictures are the start of a model project that I had long shied away from with respect: the kit parts promised a lot of fun and a highly interesting aircraft as a result, but also a lot of 'toil and trouble'. On the other hand: the adventure simply beckons.... 🙂
Here you can see the parts in almost raw condition, I only started to detail a little with round and flat wire. The tricky question was how to treat the sensitive and already somewhat battered transparent part of the unusual cockpit glazing. I decided to cut off the two side parts, mask the inside and outside of the windows and only attach the central clear part at the very end. I like the pictures with the over-designed radial engine: what a power-to-weight ratio for these racing machines!
The last two pictures show the current state of construction and detailing.... Well, we'll see...

Robert Podkoński
Taking a first row seat!

Roland Sachsenhofer
Feel very welcome of course! 🙂

Roland Sachsenhofer
There she is now - at least on her own two feet, even if the appearance with engine and mighty cowling - not to mention the upper wing - will change a lot. The construction steps up to this point were accompanied by a lot of sanding, but the accuracy of fit turned out to be surprisingly good.

Skyhiker
Ok now that's one interesting plane. Certainly not a Laird a**. What a huge engine!

Roland Sachsenhofer
You're right!
A friend asked if I was building a flying washing machine - in fact, the empty mount for the huge motor still reminds me of it. All the more so now that everything is white: it went well with all the white that Martin Mars is currently applying and forms a good basis for the following 'lemon yellow'.

Skyhiker
Looks a bit like a cement mixer to me, but I can see a washing machine in there.

Roland Sachsenhofer
Thank you Skyhiker, Cement mixer - I'm laughing my arse off, the Solution is obviously an inspiring sight: how apt!
It's probably time for the massive cowling with the mighty radial engine to go on the front end. One step towards this is the colour yellow, which will remain on the wings and tailplane. I would like to use Gunze's 'Emerald Green' for the fuselage colour.

Roland Sachsenhofer
From this morning with freshly applied decals: everything seems to shimmer and shine appropriately - but it turned out that the decals are absolute 'self-destructors'. The ones you can see here on the model fortunately went reasonably well, but the large markings on the wings and fuselage were beyond repair: just crumbs. Now I'm looking for someone who might be able to make me some painting masks on a PC. Luckily I scanned the decal sheet beforehand.

Skyhiker
Gosh that's lovely.

Lex Jassies
I always enjoy the surprise you reveal to us. Often with a type of aircraft that I had never seen before. Please keep it up! 👍

Robert Podkoński
The colours are just psychodelic... I love it!

Ben M
Beautiful paintwork!

I don't know if this helps but I've sent scans of decals to stsdecals before and they were able to make replacements for the ones that shattered.

Lex Jassies
By the way, I really like that "Skyways Inc." logo

Roland Sachsenhofer
Hi mates, I'm sure you can imagine how motivating your reactions are - thank you very much! I'll try that, Ben, thanks for that too!

Juergen Klinglhuber
Looking gorgeous !! let me know if you are succesful with stsdecals, I might have other contacts too.

Roland Sachsenhofer
Thank you Jürgen! I've just returned from the 'Bavarian Modelling Days' in Erding - a most enjoyable modelling weekend! 🙂 STS really doesn't look bad, but I may have found a quicker way: A modelling colleague has taken on the task of creating adhesive masks for the outstanding identifiers on his PC. The way things are going, it should be possible to spray soon.
This morning I was able to brace the Super Solution using what I think is a good method: The flat wire is stapled into one hole with cyanoacrylate, the other end is drilled through so that the wire is fixed in place with a drop of super glue while one end is pulled hard. Once everything has hardened - with a spray from the 'activator' in seconds - you can let go - the wire tightens perfectly and all is well. Now all that remains to be done is to sand the excess wire and glue flat before applying a new coat of paint.

Ben M
Oh it's looking so good!

I use a similar approach to wires but I use fine rubber string. I learned from Elias K on here to drill the holes and then patch the finish like you're doing.

Roland Sachsenhofer
Thanks Ben! That sounds very interesting with the rubber strings! Can you explain that in more detail? I would be interested!

Ben M
I use a product called "ez line" - maybe the best example is on my tiger moth or deperdussin builds. It is a very fine rubber string. This makes it easy to stretch tight. I drill holes and use a drop of super glue with accelerator as you do. I can do one end, stretch it tight, then do the other. The only drawback is the kind I use isn't perfectly round which is visible when it's twisted. Maybe some other modeler can comment on a better (round) brand of fine rubber line.

Roland Sachsenhofer
Thank you very much for this explanation - it helps a lot and puts me on the right track: well, to my surprise, I'm already using the material! 🙂 I know it under a different name from "Uschi van der Rosten". Excellent when it comes to depicting round wire. You have already described the shortcoming of the material. Many thanks for this tip!

Roland Sachsenhofer
A couple of new pictures show the surfaces that have been sanded smooth again in the places where I fed the tensioning wire through the holes yesterday. Now it's time to paint and touch up again - then nothing stands in the way of applying the final markings!

Roland Sachsenhofer
There are also a few new features on the Laird Super Solution - especially the huge engine changes the appearance! But it looks good on the little thing, no more traces of 'egg-plane', but pure power!

Roland Sachsenhofer
Now it's almost done! I was able to paint the missing markings on the fuselage and the upper and lower wings after a friend generously created exact masks for me on his PC and cutting plotter - thank you very much!
I drilled out the headlights on the leading edge of the upper wing once, the pitot tube on the left strut is improvised from two pieces of silver wire and the peculiar cockpit canopy is mounted - now a few small touch-ups will follow, but the Super Solution is close to the finish line!

Ben M
It's looking great so far.

Roland Sachsenhofer
Thank you Ben!

Skyhiker
That's a cool idea using a car sponge to hold the model. I think I will have to get one.

John
Regarding the Gnat, use white or pink (really!) as a base coat for yellow and it covers in fewer coats. Tamiya's yellow is probably better than most but it's still a difficult color to work with.

Mr D
Great 👍 thanks for letting me know, l been a bit confused when I've seen people spraying pink 🤔?? Then paint over. Now it makes sense will try it next time. Cheers 😀

Johne 69
Some very nice Modells and a lot of fun 👍

bughunter
What a nice RC-bird 👍 But it is an Albatros 😉

Neuling
Nice collection!

Mr D
Thanks Neuling...👍👍

Jay Dubya
Keen to understand your technique with these 1/700 ships, after a clean start - watching & learning Mick.

Christian Abraham
Looks like a great project

Tom B.
Looks veeery promising! These Japanese gunboats are interesting subjects which a nice little "brown water"-scene with that small boat should do really nice justice 👍 Looking forward to the final result!

Villiers de Vos
Fantastic detailed work.

Christian Abraham
Awesome build

Alberto
Wow, it's fantastic! Considering the scale you must razor sharp vision 🙂

Robert Podkoński
Awesome indeed! And there are sailors...it is beyond an ordinary man skills...

Shar Dipree
Fantastic work! 👍

Zbynek Honzik
Just as Alberto wrote! Unbelievably awesome!

Michael Schubert
That is incredible! I honestly can't fathom how you can get that much detail in that scale!!!

Alexander Grivonev
Incredible, the scale, the detail, the water. Magnificent 👍

Any chance of getting even closer with the camera?

Curatorm
Very fine; nice atmospheric vignet...

Neuling
A masterpiece.

Mick Markiewicz
Thanks a lot. I'm glad you like it 😉
I think there's no point going any closer, MACRO is enemy of modeler ;D

Alexander Grivonev
Come on, I am sure you gave each sailor an individual face expression 😉

Bruce Huxtable
Very impressive work, for sure! Liking the variety, as well as your neat workmanship 🙂

gorby
Excellent scratch-building!

Ben M
Very cool!

Spanjaard
really impressive!!

Skyhiker
Now, this is impressive. Bravo.

Villiers de Vos
Very nice work. Thank you for sharing.

Lochsa River
amazing.....

David Taylor
Brill.

Curatorm
Wonderfull!

Alexander Grivonev
That is amazing 👍

Robert Podkoński
I am just speechless! Awesome job! I particularly love Polish Trzmiel (the original still resides in Krakow) and HZ-1 Aerocycle (imagine flying that with such "chopper blades" below you...)

Nicolas
Impressive work. 👍

Neuling
Stunning! 👍👍

Alexander Grivonev
How did you even get the blueprints and reference material for these obscure birds..

Anatolii Smyshliaiev
Mainly on various aviation websites - aviastar.org, airwar, secretprojects and the like. There are often diagrams or drawings and basic dimensions.
Various diagrams are on drawingdatabase.com.
And just searching the Internet has not been canceled yet.
When creating the JK-1, I used paper model patterns. For the H-3 Colibri, I found a brochure from the manufacturer from 1958.
Plus, working from a photo.
With the Kellet KH-15 Stable mable, it is more difficult. To determine the dimensions, I had to work from frames of video footage of helicopter tests. And so on.