Најважније вести

Bernhard Schrock
Ha! Bughunter will eine Cf-188 Hornet bauen?… das wird besser als Oktoberfest und Weihnachten zusammen!

Rod -
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.

Rod -
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.

István Szücs
Interesting project!

J35J
I'm in for the flash flesta 😅👍🏻

Robert Podkoński
Make yourself comfortable, István and J35J. This will be surely a long party... 😉

István Szücs
Robert, almost you'd build an A-Model kit

Robert Podkoński
Believe me, István, A-model kits are much more modeller-friendly than Mach 2... Take a look here, for example: modelingmadness.com/..korean/us/hammx2.htm

Ben M
Another member of the non-aligned movement.

Marko
That's something to be excited about. Mach2 kits don't have the reputation of being shaking kits. 👍

Martin
As I said on the project, I wish you luck with this, it is something you seldom see, but it looks cool in the end. It is quite a long time ago when I did mine - al the best!

and, so far it does not look that bad for a mach2

S M
Gotta see this! 😄

John Hughes
This looks very Gerry Anderson, so I'm in!

Robert Podkoński
What an audience I have... I feel a bit under pressure now 😉 @Martin - you're right, at least the polistyrene seems to be of a good quality.

Guy Rump
I'm watching as well Robert 🙂 👍

Ekki
And me.

Robert Podkoński
Feel warmly welcomed, Mates!

Mid Franconian
Extra like for the striking project title 😂! I expected an old KP kit first…

Bruce Huxtable
Soo many seams.... Watching this tutorial for sure 😉. OMG, Robert, that's quite a critique of MACH, kits.... Good Luck!

Ben M
It's such a cool subject, I remember seeing it in my dads airplane books when I was young.

Ludvík Kružík
Robert, once again you have chosen a great topic. The French experimental jet powered Leduc aircraft looked really futuristic at the time of its creation.
I wish you strong nerves and a lot of fun building your model!

Robert Podkoński
Now I feel even more pressure 😉 ... @Bruce - I know what I am talking about, I have completed a few models from both producers already 😉 @Ludvik - I was lucky enough to see both Leduc 010 and 022 in Le Bourget museum and they still look futuristic imho 🙂

Palo M
Grabbing a sear

Robert Podkoński
Welcome, Palo!

Ludvík Kružík
He certainly wouldn't be a disgrace as a space fighter in Star Wars. 😄

The photos of the kit parts show that you really have a lot of work ahead of you.

John Hughes
Not Star Wars, more Flash Gordon by the looks of those sprues!

Neil
Hi Robert, Haha! 'da Putty Party'... Love it!... Following with great interest 🙂

Robert Podkoński
Feel welcomed to the party, Neil - every party needs a DJ 😄

Neil
Thanks Robert. I'm there mate! 🎧🤘🎶

Ben M
Those parts look gloriously terrible

Robert Podkoński
Still, the plastic is workable, Ben. As far as I have checked: it can be filed, filled, and glued... So, there is hope... 😄

Ben M
I looked in the stash and I have a mach2 kit I bought when I was young and foolish.

Robert Podkoński
I have five, not counting this one... Hmm...the testimony of what kind of mental disease it is? Nothwithstanding, only Mach 2 offered models of some exotic planes, like X-24.

gorby
I wish you luck Robert. Your going to need it (and probably a stiff drink or four). 😉
Was the kit mould made from soap? 😄

John Hughes
Depends what you're building but usually as follows: Primer, paint(s), gloss coat, decals, gloss coat (to seal decals), then weathering products and finally a matt coat to seal the lot.

Steven Van Dyck
First remark, Tamiya paint is meant for an airbrush. Some colors can also be applied with a brush, but they dry very fast. In that case you wouldn't need to prepare the model with a primer either. I use the primer mostly because the model has building materials with different colors. Only if painting is done and decals are applied over a gloss varnish (if paint wasn't glossy), and with a gloss seal over them, should you use any wash. I mostly use colored wash. Try to remove most of it and only leave it in the panel lines. At last use a dull coat.

Kesa Tiho
Im building a german 75mm anti tank gun and japanese type 97

Kesa Tiho
Well from my experience tamiya paint can be used with a brush very well

Ben M
I think we all come up with processes that work for us. For armor models I normally prime, do preshading, color coat with acrylic, weather with cheap artists oils and pencils/pastels and then a final spray of "dust" with acrylic. Example here: Disston Tractor Tank | Album by uhrwerk (1:35)

Kesa Tiho
Thats helpful

Kesa Tiho
Thanks

John Hughes
YouTube is your friend for modelling videos too. There are many channel devoted to plastic modelling. Some of the one's I watch regularly are

Nigel's Modelling Bench (does a beginners series)

Jeff Donahue Scale Modeling

The Model Shed

Yorkshireman Models

Nostalgic Plastic

There are loads of them.

gorby
As Steven says, Tamiya acrylic paint is intend o be used in airbrushes. If that is the paint you have, the best way to brush paint it is by adding a few drops of Tamiya Paint Retarder. I know that product isn't widely available so alternately, and brand of acrylic paint retarder should work. Again if that's not something you can get your hands on try adding a little bit of Tamiya Thinners (Isopropyl Alcohol is a cheaper alternative. As it's alcohol you might need an adult to buy it for you. Most importantly, don't drink it, it isn't that sort of alcohol).
I haven't tried it personally, there is a way to mix your own paint retarder – quoting form the internet:
most acrylic retarders are just glycerin, glycerin is cheap at the chemist/pharmacy. It has a syrupy consistency so put about 125ml it in a 500ml distilled water then add about 5 drops of washing-up liquid.

Unfortunately model paints aren't as straight forward as just painting from the jar.

Kesa Tiho
I dont use tamiya acrylic i use just plain tamiya paint with no other labels on it

gorby
Plain Tamiya paint is acrylic. 😉
Somewhere on the jar it should say what it is. If it's 'X' or 'XF' then it's acrylic, if it's 'LP' then it's lacquer. I haven't used lacquer paint so I don't know how to use that.
Like I said, model paints aren't straightforward. 😄