Најважније вести
NICOLAS GRANDMONTAGNE
додао је нови фотоалбум.
додао је нови фотоалбум.
21 1 September, 16:49
NICOLAS GRANDMONTAGNE
Rivetage terminé avec les rivets Eduard.
Riveting completed with the Eduard Decals.
Rivetage terminé avec les rivets Eduard.
Riveting completed with the Eduard Decals.
6 October, 17:12
Ferenc Sarka
The tail rotor is a masterpiece! May i ask the brand of the crew? Keep going. It will be a superb Apache.
The tail rotor is a masterpiece! May i ask the brand of the crew? Keep going. It will be a superb Apache.
6 October, 17:24
Bozzer
додао је нови фотоалбум.
додао је нови фотоалбум.
4 11 August, 08:01
Bozzer
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
11 August, 08:07
Bozzer
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
2 October, 07:45
Bozzer
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
5 October, 23:24
Martin Oostrom
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
6 October, 07:16
Nigel Chapman
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
6 October, 08:34
Bozzer
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
6 October, 16:24
Mr D
Looking great 👍
What is it made from??
I've never come across a build like this??
Looking great 👍
What is it made from??
I've never come across a build like this??
6 October, 18:44
Alejandro Vucko
додао је нови пројекат.
додао је нови пројекат.
1 6 October, 18:32
Snake Plissken
One of the best things about this site (scalemates) is that it exposes one to a lot of previously unknown airplanes (cars, tanks, ships, helicopters etc. too). This a pretty sleek looking plane -- thanks for sharing and post plenty of photos! 😎
One of the best things about this site (scalemates) is that it exposes one to a lot of previously unknown airplanes (cars, tanks, ships, helicopters etc. too). This a pretty sleek looking plane -- thanks for sharing and post plenty of photos! 😎
6 October, 18:43
Alex Tomb
је власник овог предмета
је власник овог предмета
1975
Martini Brabham BT44B FIA Formula 1 World Championship 1975 Tamiya 1:12
12042 (TAM12042) 2021 Нови делови 6 October, 18:42
Oliver Peissl
додао је нови фотоалбум.
додао је нови фотоалбум.
30 4 October, 02:00
Gary Victory
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
4 October, 06:36
Tobias Lewandovski
додао је нови фотоалбум.
додао је нови фотоалбум.
6 25 February, 18:16
Snake Plissken
This is a good kit even though it started life as a motorized kit. The real rubber tires and posable front wheels are a definite bonus.
This is a good kit even though it started life as a motorized kit. The real rubber tires and posable front wheels are a definite bonus.
6 October, 18:40
Michael Johnson
је власник овог предмета
је власник овог предмета
US Navy
NC-121K "Connie" Project Magnet "Paisano Dos" Minicraft Model Kits 1:144
14560 2005 Нови декали/налепнице 6 October, 18:40
Paul Gallagher
жели овај предмет
жели овај предмет
Mitsubishi A6M5b Zero Fighter Type 52 Otsu `653rd Flying Group´ Limited Edition
Hasegawa 1:32
08259 2022 Нови делови 6 October, 18:37
Paul Gallagher
жели овај предмет
жели овај предмет
Mitsubishi A6M2b Zero Fighter (Zeke) Includes 8 Marking Options (Limited Edition)
Tamiya 1:72
25170 2014 Нови декали/налепнице 6 October, 18:34
Rui S
додао је нови фотоалбум.
додао је нови фотоалбум.
32 слике
Outono / Autumn 1944_Jagdpanzer Tiger (P) Elefant1:35
WIP. Those Blanket lines Will be corrected.
Пројекат: Jagdpanzer Tiger (P) Elefant
19 9 March 2015, 02:53
Rui S
Thank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...
Thank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...
9 March 2015, 15:53
Rui S
Kim, Coming from an real Expert in the subject like you, is a great complement, Thanks.
Kim, Coming from an real Expert in the subject like you, is a great complement, Thanks.
9 March 2015, 19:06
Kim Branders
I'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.
I'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.
10 March 2015, 07:03
Rui S
HeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.
HeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.
10 March 2015, 14:46
Rui S
Thank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉
Thank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉
22 March 2015, 01:22
Rui S
Thank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...
Thank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...
22 March 2015, 20:22
Tim Heimer
Hey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking
Hey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking
22 March 2015, 22:50
Rui S
Agree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...
Agree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...
22 March 2015, 22:57
Rui S
Some ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...
Some ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...
20 June 2016, 16:17
Wesley De Braekeleir
Ubercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉
Ubercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉
11 December 2016, 20:30
CaptGPF
Damn Rui, that camo pattern is wicked! The mud effects are also impressive!
Damn Rui, that camo pattern is wicked! The mud effects are also impressive!
21 September, 00:14
Mr James
I agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?
I agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?
21 September, 00:42
Rui S
@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated
@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated
21 September, 11:48
Rui S
I'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...
I'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...
29 September, 21:02
Alec K
Nice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍
Nice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍
30 September, 11:52
Doubtingmango
Great job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!
Great job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!
30 September, 12:22
Rui S
@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉
@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉
30 September, 21:37
Desert Marlin
Looks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!
Looks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!
4 October, 00:56
Ben M
I hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.
I hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.
4 October, 01:52
Rui S
@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.
@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.
5 October, 14:11
Andy Glessner@TaigaWutz
Hallo, haben sie noch die Ketten zu verkaufen?
Danke
Andy
Hallo, haben sie noch die Ketten zu verkaufen?
Danke
Andy
2 October, 12:42
TaigaWutz
Hallo Andy, zunächst sorry für meine späte Antwort. Ich war bis heute im Urlaub. Die Kette ist noch in meinem Besitz und auch zu verkaufen.
Viele Grüße
Peter
Hallo Andy, zunächst sorry für meine späte Antwort. Ich war bis heute im Urlaub. Die Kette ist noch in meinem Besitz und auch zu verkaufen.
Viele Grüße
Peter
6 October, 18:29
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo