Најважније вести
bughunter@scalemates
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and његов posts and agree or disagree with this user being a spammer: Go to vote page
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and његов posts and agree or disagree with this user being a spammer: Go to vote page
17 October, 16:53
Andrea Brenco
додао је нови фотоалбум.
додао је нови фотоалбум.
68 31 May 2023, 15:48
David Januska
Nice start, cockpit is perfect. This is new Eduard tooling? How it fits, and what about overall engineering?
Nice start, cockpit is perfect. This is new Eduard tooling? How it fits, and what about overall engineering?
11 June 2023, 17:39
Łukasz Gliński
Following. I used to be sure both Gollob brothers used to be the Polish speedway stars, not the German pilots 😉
Following. I used to be sure both Gollob brothers used to be the Polish speedway stars, not the German pilots 😉
13 June 2023, 20:47
Andrea Brenco
@David: thank you very much for your comment! Fit is nearly perfect everywhere, I wrote in the note of the photo the only point where I had to use a file, hope you will find it useful! Engeneering is really good and quite revolutionary in some points, instructions MUST be read carefully, better read the Eduard June Info too.
Guy and Lukasz, happy to have you on board!
@David: thank you very much for your comment! Fit is nearly perfect everywhere, I wrote in the note of the photo the only point where I had to use a file, hope you will find it useful! Engeneering is really good and quite revolutionary in some points, instructions MUST be read carefully, better read the Eduard June Info too.
Guy and Lukasz, happy to have you on board!
13 June 2023, 22:40
Andrea Brenco
Thanks Victor and Bernd! i am close to the painting stage, hopefully...
Thanks Victor and Bernd! i am close to the painting stage, hopefully...
19 June 2023, 21:35
Neil Patrick
Hi Andrea. I have been keenly waiting to see this built up since it was announced. Delighted that it seems you will be the first to post a full build report! It's looking magnificent already! I shall follow eagerly of course!
Hi Andrea. I have been keenly waiting to see this built up since it was announced. Delighted that it seems you will be the first to post a full build report! It's looking magnificent already! I shall follow eagerly of course!
24 June 2023, 20:17
Andrea Brenco
Thanks Thomas and Dave, approaching the finish line hopefully, I am itching to start another one!!!
Thanks Thomas and Dave, approaching the finish line hopefully, I am itching to start another one!!!
4 July 2023, 21:41
Neil Patrick
Looks wonderful Andrea and I'm looking forward to reading your post build notes. More F's to come I hope?
Looks wonderful Andrea and I'm looking forward to reading your post build notes. More F's to come I hope?
14 July 2023, 19:45
Andrea Brenco
Thank you all for your kind comments! I posted a few more photos, post build notes in a day or two: I am currently building a F-2 and I am gathering more data.... this kit is addictive...
Thank you all for your kind comments! I posted a few more photos, post build notes in a day or two: I am currently building a F-2 and I am gathering more data.... this kit is addictive...
16 July 2023, 23:05
Patrick Hagelstein
Thanks for your posts Andrea! Very helpful! And I can only imagine how addictive that kit can be. 😅
Thanks for your posts Andrea! Very helpful! And I can only imagine how addictive that kit can be. 😅
17 July 2023, 10:15
Andrea Brenco
Again, thank you everybody for your appreciations!!!
I added my latest notes in the last two photos, I hope you will find them useful!
Again, thank you everybody for your appreciations!!!
I added my latest notes in the last two photos, I hope you will find them useful!
18 July 2023, 11:35
Neil Patrick
Another beautiful build Andrea and thank you for the post-build construction notes. Hope we don't have to wait too long now for the Gs and Ks from Eduard....
Another beautiful build Andrea and thank you for the post-build construction notes. Hope we don't have to wait too long now for the Gs and Ks from Eduard....
19 July 2023, 09:48
Andrea Brenco
I'm terribly sorry for the late response!!!
Thank you a lot to all of you who took the time for your appreciation to my little model!!
@Neil: we will have the G in November, Eduard will have me go broken....
I'm terribly sorry for the late response!!!
Thank you a lot to all of you who took the time for your appreciation to my little model!!
@Neil: we will have the G in November, Eduard will have me go broken....
5 October 2023, 21:08
Andrea Brenco
додао је нови фотоалбум.
додао је нови фотоалбум.
79 18 November 2021, 16:19
Moreno Baruffini
I was hoping to see the "Uniposca technique" in action!
Thank you Andrea, an excellent work so far!
I was hoping to see the "Uniposca technique" in action!
Thank you Andrea, an excellent work so far!
5 December 2021, 07:24
Simon Nagorsnik
I agree, very nice winter camo!
if it doesn't work then I don't know anymore either ...😄
I agree, very nice winter camo!
if it doesn't work then I don't know anymore either ...😄
5 December 2021, 07:29
Thomas Kolb
What a weird camo, but a great idea to represent it! I would never have the guts to even try.
What a weird camo, but a great idea to represent it! I would never have the guts to even try.
5 December 2021, 10:07
Andrea Brenco
Thanks everybody for your kind appreciation! I wanted to try this since I bought the Hobby 2000 boxing, but later on I discovered that this particular a/c was a G-1 and no other info was available, I decided then to use the Hobby Boss kit I had in my stash with the minimal modification required to calm my modeling consciousness...
I used a UNI-POSCA pen, is water based paint available from stationery and hardware stores in Italy. This is what is wrote on it that it may be useful for a search
www.posca.com
PC-1MR
pin type
0,7 mm
MITSUBISHI PENCIL CO. LTD
HTH
Thanks everybody for your kind appreciation! I wanted to try this since I bought the Hobby 2000 boxing, but later on I discovered that this particular a/c was a G-1 and no other info was available, I decided then to use the Hobby Boss kit I had in my stash with the minimal modification required to calm my modeling consciousness...
I used a UNI-POSCA pen, is water based paint available from stationery and hardware stores in Italy. This is what is wrote on it that it may be useful for a search
www.posca.com
PC-1MR
pin type
0,7 mm
MITSUBISHI PENCIL CO. LTD
HTH
5 December 2021, 10:29
Neil Patrick
Brilliant work Andrea. I bought a paint pen like this months ago thinking it would be ideal for Lutfwaffe squiggles. I haven't yet got round to using it, but your example shows it works brilliantly. That and your talent of course!
Brilliant work Andrea. I bought a paint pen like this months ago thinking it would be ideal for Lutfwaffe squiggles. I haven't yet got round to using it, but your example shows it works brilliantly. That and your talent of course!
5 December 2021, 10:37
Andrea Brenco
Thank you all, much appreciated! it has been a really carefree fun build for me, now on to the third one waiting.
Thank you all, much appreciated! it has been a really carefree fun build for me, now on to the third one waiting.
8 December 2021, 13:10
Jan Peters
Very nice stuka, and the best bit is the fact you really enjoyed this project 👍🏻
Very nice stuka, and the best bit is the fact you really enjoyed this project 👍🏻
8 December 2021, 17:57
Andrea Brenco
Thank you very much to all of you, I appreciate every single comment,
Happy modeling everybody!
Andrea
Thank you very much to all of you, I appreciate every single comment,
Happy modeling everybody!
Andrea
9 December 2021, 10:53
Andrea Brenco
Sold this one too, to someone who loves winter camouflage and bought my Ju 88C-6 too!
Sold this one too, to someone who loves winter camouflage and bought my Ju 88C-6 too!
27 March, 22:08
Denis Dogadov
Great job!
But why was the Hobby Boss kit chosen?
Immediately we see a very thin fuselage.
Great job!
But why was the Hobby Boss kit chosen?
Immediately we see a very thin fuselage.
28 March, 16:09
Andrea Brenco
Thanks a lot David and Denis!
To be honest, I didn't notice the thin fuselage but accuracy wasn't my goal with this build , with hypothetical code markings.
Good to know anyway, thanks for pointing it out!
Thanks a lot David and Denis!
To be honest, I didn't notice the thin fuselage but accuracy wasn't my goal with this build , with hypothetical code markings.
Good to know anyway, thanks for pointing it out!
2 April, 21:30
Mr James
Now thats some great winter camo... What a great build that is. I like it a lot.
Now thats some great winter camo... What a great build that is. I like it a lot.
2 April, 21:57
Andrea Brenco
додао је нови фотоалбум.
додао је нови фотоалбум.
57 13 April 2023, 10:52
bughunter
Pic 10 could be bigger scale - only the thicker struts in pic 11 shows the real scale. Top work!
Pic 10 could be bigger scale - only the thicker struts in pic 11 shows the real scale. Top work!
11 September 2023, 17:55
Andrea Brenco
Thx a lot @ David, James and Andy, and to bughunter too: you are right, Eduard struts are thicker than Roden's ones, but the kit in its whole is better... it will be nice if someone will 3D print them in a more to-scale thickness!
Thx a lot @ David, James and Andy, and to bughunter too: you are right, Eduard struts are thicker than Roden's ones, but the kit in its whole is better... it will be nice if someone will 3D print them in a more to-scale thickness!
12 September 2023, 16:54
David R. Meizoso
One of the finest works in 1/72 I've ever come across, congrats!
One of the finest works in 1/72 I've ever come across, congrats!
13 September 2023, 14:38
Andrea Brenco
Thx Michael, Finn and David!
Finished!!! This was a really enjoyable and fun build, I really liked every stages of it, thanks to Eduard's great kit engineering, Aviattic and Eduard decals, Gaspatch 3D Spandau 08/15,oil colours, Uniposca oil pastels and Tamiya pigment and last but not least, Uschi Superfine elastic thread for the few rigging needed.
Thanks for following me in this build, now time to finish that second Fokker waiting in the queue!
Thx Michael, Finn and David!
Finished!!! This was a really enjoyable and fun build, I really liked every stages of it, thanks to Eduard's great kit engineering, Aviattic and Eduard decals, Gaspatch 3D Spandau 08/15,oil colours, Uniposca oil pastels and Tamiya pigment and last but not least, Uschi Superfine elastic thread for the few rigging needed.
Thanks for following me in this build, now time to finish that second Fokker waiting in the queue!
13 September 2023, 15:13
Andrea Brenco
Thank you very much, Michael Robert and Marcin!!! Your comments are really appreciated!
Thank you very much, Michael Robert and Marcin!!! Your comments are really appreciated!
13 September 2023, 23:25
Andrea Brenco
...and OTTO is gone to France too, to rejoice with Kirschstein's "optische Täuschung"!!!
...and OTTO is gone to France too, to rejoice with Kirschstein's "optische Täuschung"!!!
4 March, 22:43
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo