Најважније вести
Mark
је власник овог предмета
је власник овог предмета
Warpaint Colours and Markings of British Army Vehicles 1903-2003 Volu...
Green No. 4106
Dick Taylor
2009 9 September, 17:28
Martin Støyl@Thomas Wirsching
Hey there, Do you still have this available? I am interested, but never purchased from on here before, and I am uncertain what the shipping would be to Norway? any experiences?
Hey there, Do you still have this available? I am interested, but never purchased from on here before, and I am uncertain what the shipping would be to Norway? any experiences?
8 September, 09:07
Thomas Wirsching
Hello Martin,
I bought and sold some itemes here already and never experienced any problems. Actually I just put this aircraft in for sale yesterday as I got the new one from Quinta with all the 3d printed extra parts for the SM3 version. I will check how much the shipping cost are to Norway and report to you later. If you are interested: I also have the Eduard Brassin wheels (648780) and Quinta´s full version interior 3D decal set (QD48249) for this specific aircraft for sale. These could be easily packed within the kit box
Hello Martin,
I bought and sold some itemes here already and never experienced any problems. Actually I just put this aircraft in for sale yesterday as I got the new one from Quinta with all the 3d printed extra parts for the SM3 version. I will check how much the shipping cost are to Norway and report to you later. If you are interested: I also have the Eduard Brassin wheels (648780) and Quinta´s full version interior 3D decal set (QD48249) for this specific aircraft for sale. These could be easily packed within the kit box
8 September, 13:17
Thomas Wirsching
Hello Martin,
DHL small parcel M seems to be the most economic postal service to Norway (they state shipping costs will be higher to Svalbard, Bouvet Island and JanMeyen). Together with tracking number they ask for the shipping 22,50 €.
Hello Martin,
DHL small parcel M seems to be the most economic postal service to Norway (they state shipping costs will be higher to Svalbard, Bouvet Island and JanMeyen). Together with tracking number they ask for the shipping 22,50 €.
8 September, 13:37
Martin Støyl
I will need to think about it a little, Norway has banned Zvezda kits, so it's not obtainable in norway anymore, and our currency is kinda in tatters so buying from abroad is just really expensive...
Our currency compared to the euro is nearly down by 40% in 4-5 years... I'll get back to you once I had a little think 😉
I will need to think about it a little, Norway has banned Zvezda kits, so it's not obtainable in norway anymore, and our currency is kinda in tatters so buying from abroad is just really expensive...
Our currency compared to the euro is nearly down by 40% in 4-5 years... I'll get back to you once I had a little think 😉
8 September, 14:13
Thomas Wirsching
No problem. Don´t worry about your currency - our complete energy infrastructure is in tatters and our big industrial companies silently begin to withdraw from Germany. Couldn´t be more worse in Norway than here...
No problem. Don´t worry about your currency - our complete energy infrastructure is in tatters and our big industrial companies silently begin to withdraw from Germany. Couldn´t be more worse in Norway than here...
8 September, 14:25
Martin Støyl
I'll take it I think, but how would payment be smoothest? via paypal perhaps?
I feel all of europe has somewhat problems, dunno how it went so tits up but it seems it has somehow.
I am currently waiting for some money to be transfered via my own accounts, and it seems it's taking a little longer then usual, so I would probably not be able to make the payment until tomorrow it seems.
I'll take it I think, but how would payment be smoothest? via paypal perhaps?
I feel all of europe has somewhat problems, dunno how it went so tits up but it seems it has somehow.
I am currently waiting for some money to be transfered via my own accounts, and it seems it's taking a little longer then usual, so I would probably not be able to make the payment until tomorrow it seems.
8 September, 19:12
Thomas Wirsching
My Paypal account is like my email adress: thomas@die-wirschings.de. Please choose the "friends" transaction without fee and please tell me your postal adress when you are ready.
My Paypal account is like my email adress: thomas@die-wirschings.de. Please choose the "friends" transaction without fee and please tell me your postal adress when you are ready.
9 September, 10:44
Thomas Wirsching
If you look at my account´s for sale chapter you can find the items relatet to the Su-25. The Eduard brassin wheels are 4,-- € and Quintas big interior 3e decal set would be 25,-- €.
If you look at my account´s for sale chapter you can find the items relatet to the Su-25. The Eduard brassin wheels are 4,-- € and Quintas big interior 3e decal set would be 25,-- €.
9 September, 17:27
Mark
је власник овог предмета
је власник овог предмета
The Luftwaffe Battle of Britain Fighter Pilots' Kitbag Uniforms & equipment from the summer of 1940 and the human s...
Mark Hillier
2018 9 September, 17:20
Mark
је власник овог предмета
је власник овог предмета
The RAF Battle of Britain Fighter Pilots' Kitbag Uniforms & equipment from the summer of 1940 and the human s...
Mark Hillier
2018 9 September, 17:20
arron parry
жели овај предмет
жели овај предмет
RAF: Post-war Roundels & Fin Flashes - Type D
Modeldecal 1:72
47 9 September, 17:19
Jakub Wiraszka
додао је нови фотоалбум.
додао је нови фотоалбум.
40 5 November 2023, 20:49
Jakub Wiraszka
Thanks Ingo, I must admit it was a little challenge for me but I can't look on what Trumpy just threw into the box. Sadly but as always Trumpy became good base for huge amount of work...
Thanks Ingo, I must admit it was a little challenge for me but I can't look on what Trumpy just threw into the box. Sadly but as always Trumpy became good base for huge amount of work...
14 November 2023, 18:15
Ingo F
Unfortunately that's true, but on the other hand it's good because you can do a lot on the model yourself. There's nothing interesting about a perfect model out of the box. I also have this model in my stash. I intend to convert it into the T-84-120 Yatagan (object 478N1).
Unfortunately that's true, but on the other hand it's good because you can do a lot on the model yourself. There's nothing interesting about a perfect model out of the box. I also have this model in my stash. I intend to convert it into the T-84-120 Yatagan (object 478N1).
14 November 2023, 18:34
Jakub Wiraszka
Ingo what I meant was rather huge amount of work with imperfections and a lot of mistakes in T-84 shapes that Trumpy did.... for instance T-80U from RPG also need some work but even if You will decide to make only out of the box model You'll will have quite nice result.
At the very beginning I tried to build T-84U obj.478DU-5 (Turkish tender if I'm not mistaken). Unfortunatelly, to few reference photos made to build DU-9 version. But anyway Yatagan is great idea as well, fingers crossed.
Ingo what I meant was rather huge amount of work with imperfections and a lot of mistakes in T-84 shapes that Trumpy did.... for instance T-80U from RPG also need some work but even if You will decide to make only out of the box model You'll will have quite nice result.
At the very beginning I tried to build T-84U obj.478DU-5 (Turkish tender if I'm not mistaken). Unfortunatelly, to few reference photos made to build DU-9 version. But anyway Yatagan is great idea as well, fingers crossed.
14 November 2023, 18:52
Ingo F
Unfortunately, this is almost always the case with Trumpy when it comes to quality and accuracy. In many cases, parts from other kits are recycled and the whole thing is sold as a new kit. Whether the kit is then really close to the real model is a different matter. Well, it will be interesting to see how the T-80U models from Amusing Hobby and Rye Field Model turn out. I wonder if they will also bring out the other versions of the T-80. I'm still considering whether to get it with or without the interior.
Unfortunately, this is almost always the case with Trumpy when it comes to quality and accuracy. In many cases, parts from other kits are recycled and the whole thing is sold as a new kit. Whether the kit is then really close to the real model is a different matter. Well, it will be interesting to see how the T-80U models from Amusing Hobby and Rye Field Model turn out. I wonder if they will also bring out the other versions of the T-80. I'm still considering whether to get it with or without the interior.
14 November 2023, 19:02
Jakub Wiraszka
I've seen some photos and it's clear that RFM will release the T-80UK right after the T-80U. But I have already seen some shortcomings, some details are not in scale, but overall I think this could be an example of a model with a good price-quality ratio. Anyway, I really like the rubber RPG parts...
I've seen some photos and it's clear that RFM will release the T-80UK right after the T-80U. But I have already seen some shortcomings, some details are not in scale, but overall I think this could be an example of a model with a good price-quality ratio. Anyway, I really like the rubber RPG parts...
14 November 2023, 19:11
Ingo F
I'm thinking about getting the interior version from Amusing. Assemble it and then i will draw the area that is visible with open hatches in 3D. I can then print this out if necessary and add it to the model. You don't need the complete interior, 95% of which will not be visible. That's what I intend to do with the T-72 and T-90 models from Amusing.
I'm thinking about getting the interior version from Amusing. Assemble it and then i will draw the area that is visible with open hatches in 3D. I can then print this out if necessary and add it to the model. You don't need the complete interior, 95% of which will not be visible. That's what I intend to do with the T-72 and T-90 models from Amusing.
14 November 2023, 19:17
Jakub Wiraszka
That's great idea. With interior maybe someday🙂 recently I dont have time even to build without it....
That's great idea. With interior maybe someday🙂 recently I dont have time even to build without it....
14 November 2023, 19:27
MythialEn
If you don't mind, could you list some of the inaccuracy about this kit? I also wants to build this kit with accuracy but not sure where to start.
If you don't mind, could you list some of the inaccuracy about this kit? I also wants to build this kit with accuracy but not sure where to start.
29 August, 15:18
Jakub Wiraszka
MythialEn
modelwork.pl/topic/5..-9-trumpeterscratch/ here You can find full build with details it ia in polish but I think you can easily translate this to english. It is better to follow the thread in forum than listing all corrections and changes, simply there are to many of them. I hope it will help You
MythialEn
modelwork.pl/topic/5..-9-trumpeterscratch/ here You can find full build with details it ia in polish but I think you can easily translate this to english. It is better to follow the thread in forum than listing all corrections and changes, simply there are to many of them. I hope it will help You
29 August, 21:00
Jakub Wiraszka
thanks Cortex, I don't know when i'll finish. Simply dont have enough time... nevertheles the time sooner than later will come 🙂
thanks Cortex, I don't know when i'll finish. Simply dont have enough time... nevertheles the time sooner than later will come 🙂
29 August, 21:03
MythialEn
Thank you Jakub. If you don't mind me to ask, is the orignal shtora light in the kit too big compared to the real deal and it it why you changed it? The ratio of the turret with the shtora light looks quarky but I can't put finger on what specific part ratio is wrong.
Thank you Jakub. If you don't mind me to ask, is the orignal shtora light in the kit too big compared to the real deal and it it why you changed it? The ratio of the turret with the shtora light looks quarky but I can't put finger on what specific part ratio is wrong.
6 September, 23:57
Jakub Wiraszka
MythialEn
Yes. Not in scale and with very poor details. In my case I also wanted to make them open, without covers, to see black glass inside. I used Shtora copy which I made from the Miniarm set for the T-80UK conversion.
MythialEn
Yes. Not in scale and with very poor details. In my case I also wanted to make them open, without covers, to see black glass inside. I used Shtora copy which I made from the Miniarm set for the T-80UK conversion.
7 September, 19:48
MythialEn
Hi Jakub, Thank you. may i ask how big is the differences of size between the one in the box and one using? like few mm, or is it like few cm?
Hi Jakub, Thank you. may i ask how big is the differences of size between the one in the box and one using? like few mm, or is it like few cm?
9 September, 15:47
Jakub Wiraszka
its rather fraction of mm.... the details of the Shtora heat dissipation housing are very poor as well in the Trumpy version of it
its rather fraction of mm.... the details of the Shtora heat dissipation housing are very poor as well in the Trumpy version of it
9 September, 17:15
Stephane Benoit
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Sd.Kfz. 173 Jagdpanther G1 Early Production w/Zimmerit Limited Edition (Without Interior)
Takom 1:35
2125W (TAK2125W) 2024 Нови делови 9 September, 17:12
Stephane Benoit
означио овај артикал као по наруџби
означио овај артикал као по наруџби
WWII German ammo boxes for KwK/StuK 37
Panzer Art 1:35
RE35-414 9 September, 17:11
Stephane Benoit
означио овај артикал као по наруџби
означио овај артикал као по наруџби
7,5cm KwK 37 & StuK 37 L/24
RB Model 1:35
35P02 9 September, 17:10
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo