Најважније вести

Spanjaard
interesting, I am in

J35J
Me 2!👍🏻

Ben M
👀

Jennifer Franklin
following

Peter Wu
Thanks for sharing the pic

Thomas Kolb
Super cool! I love projects with Viggen wearing the "leaves and meadows" camo. Your masks seem just perfect.

J35J
Great paintjob!

Ekki
Fantastic work!

Thomas Kolb
That looks amazing! The colors seem pretty accurate too, very difficult to balance.

Glynn Jacobs
BEAUTIFUL!

This is one of my projects. I have the kit, some resin goodies, and the decals ready!

Which paint brand did you use?

Vicente Sánchez Navarro
Thanks! I have put the color references in one of the photos.

Spanjaard
wow, fantastic paintjob!!!

Duster_d
Very impressive work with tricky camo! 👍

Michael Kohl
Nice

Jennifer Franklin
The camo looks amazing; I agree with everyone.

Sy Bar
OOB build of a great looking plane

Sy Bar
To add detail to cockpit I used the new "Real Colors Markers" they work well with great coverage and so far the "brush" tip makes the job easy and natural

Bruce Huxtable
Very neat and tidy cockpit, Sy. You must have a very steady hand!

DerMattes
Nice cockpit! Folowing 👍

Sy Bar
Cheers for coments peeps, as I said the tips of the markers do all the work but not having too much coffee before also helps 😁

Sy Bar
The Hunter is just about the best looking jet to have flown

Nicolas
Great start.

Sy Bar
The instruction in step 16 confused me for awhile. I got the cutout bit (seams the large extra fuel tanks interfered with the flaps!) but it took some time to workout the fill instructions.
It's only when you put the newly clipped flaps on you see the gap left on the wing, creating too much drag and the fill becomes obvious 🤪

Thomas Kolb
Looks great already!

Ekki
Watching!

Rando
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.

I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.

Oleg Bogolei
Nice idea and intersiting projeact. Also have two of them in a stash)

Freak
Great idea for a double build. Following!

Rando
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.

Urban Gardini
Now this seems like a build that I've to follow!

Rando
Welcome Urban, happy to have you! "It's only a model!"

Sergej I
Following 🙂 👍

Rando
Hi Sergej! I'm very very excited to get started on this one

Casey Beckett
Following - got 3 of those nice new Sword RF's in the stash.

Jos Jansen
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...

Patrick Hagelstein
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!

Rando
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...

Rando
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.

David Fuller
Following

Rando
Welcome David!

I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well

Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.

Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.

J35J
Great attention to details Rando! Following👍🏻

Rando
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.

Rando
All the interior parts are in, soon time to put the fuselages together 👍

Guy Rump
Looking good, following. 👍

Rando
Hello Guy, welcome 😊

Fuselages are together. Now getting all the panels and gear bay doors to sit flush.

Calvin Gifford
Very nice! How is the Sword kit so far??

Rando
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison

Calvin Gifford
👍

S M
Double build! Following!

Rando
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.

Casey Beckett
Backup RF-8 inbound Rando ! Shipped Friday!

Rando
You the man Casey! Did some scratchbuilding tonight

Casey Beckett
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.

Rando
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.

Rando
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.

Calvin Gifford
👍

S M
Clear parts look good 👍

Michael Kohl
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.

Rando
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.

Rando
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets

Calvin Gifford
Whoot!

Nicolas
I missed this one, following. I love these side by side builds.
Great progress so far. 👍

Rando
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.

Thomas Kolb
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!

Rando
I've painted the undersides of the CVW-16 birds. Unfortunately I did something stupid, something I even decided against at first--I tried doing a "pour" into the intakes to get them painted. This was a bad idea for the RF-8 in particular. I thought that since they were glued together I could get away with no leaks, but I saw the paint level draining, and I knew the paint would appear inside the camera windows. Lo and behold I saw paint when I peeked under the masks.

Feels horrible that I did this, even if I have some ways I could fix them. I can pop the side windows out and clean the bottom side windows, but putting them back in will be a pain since the side windows are meant to be attached from the inside. UGH. Any clever ideas to fix this mess are welcome, this is definitely one of those "mojo killers."

Rando
Think I fixed the windows. The bottom windows will still be a little smudgy. But I was able to get the sides back in by gluing a toothpick to the mask and rotating it from the inside, then seating it on the frame.

Calvin Gifford
Glad you figured it out!

Rando
After fussing with the white for what seemed like forever, I finally masked to paint the gull grey. Unfortunately this revealed a ghost seam on the spine, so on the plastic putty goes. Hopefully it goes away.

gorby
Very nice. The sea looks particularly good.

Paul Gallagher
thanks Gorby

Sy Bar
Looking nice and neat build 👍
Watching with interest 🙂

Ingo F
Amazing work mate! 👍

Jakub Wiraszka
Thanks Ingo, I must admit it was a little challenge for me but I can't look on what Trumpy just threw into the box. Sadly but as always Trumpy became good base for huge amount of work...

Ingo F
Unfortunately that's true, but on the other hand it's good because you can do a lot on the model yourself. There's nothing interesting about a perfect model out of the box. I also have this model in my stash. I intend to convert it into the T-84-120 Yatagan (object 478N1).

Jakub Wiraszka
Ingo what I meant was rather huge amount of work with imperfections and a lot of mistakes in T-84 shapes that Trumpy did.... for instance T-80U from RPG also need some work but even if You will decide to make only out of the box model You'll will have quite nice result.
At the very beginning I tried to build T-84U obj.478DU-5 (Turkish tender if I'm not mistaken). Unfortunatelly, to few reference photos made to build DU-9 version. But anyway Yatagan is great idea as well, fingers crossed.

Ingo F
Unfortunately, this is almost always the case with Trumpy when it comes to quality and accuracy. In many cases, parts from other kits are recycled and the whole thing is sold as a new kit. Whether the kit is then really close to the real model is a different matter. Well, it will be interesting to see how the T-80U models from Amusing Hobby and Rye Field Model turn out. I wonder if they will also bring out the other versions of the T-80. I'm still considering whether to get it with or without the interior.

Jakub Wiraszka
I've seen some photos and it's clear that RFM will release the T-80UK right after the T-80U. But I have already seen some shortcomings, some details are not in scale, but overall I think this could be an example of a model with a good price-quality ratio. Anyway, I really like the rubber RPG parts...

Ingo F
I'm thinking about getting the interior version from Amusing. Assemble it and then i will draw the area that is visible with open hatches in 3D. I can then print this out if necessary and add it to the model. You don't need the complete interior, 95% of which will not be visible. That's what I intend to do with the T-72 and T-90 models from Amusing.

Jakub Wiraszka
That's great idea. With interior maybe someday🙂 recently I dont have time even to build without it....

MythialEn
If you don't mind, could you list some of the inaccuracy about this kit? I also wants to build this kit with accuracy but not sure where to start.

Cortex
Wow, extreme detailing. Excited for this build!

Jakub Wiraszka
MythialEn
modelwork.pl/topic/5..-9-trumpeterscratch/ here You can find full build with details it ia in polish but I think you can easily translate this to english. It is better to follow the thread in forum than listing all corrections and changes, simply there are to many of them. I hope it will help You

Jakub Wiraszka
thanks Cortex, I don't know when i'll finish. Simply dont have enough time... nevertheles the time sooner than later will come 🙂

Michael Kohl
Fantastic multimedia show. Almost too beautiful to put color on.

Ekki
Following

Finn
Me too

Guy Rump
Me as well. 👍

DerMattes
Following as well.

Glynn Jacobs
VERY nice work!

Cristian A
Excellent project, watching. The Argentine Étendard aircraft were effective in causing significant damage during the Falklands/Malvinas conflict.

Michael Kohl
Following

Guy Rump
Looking good, following. 👍 What do you use the Novus scratch remover for? Is it any good?

Will Dossel
I use it as a final step before priming to polish out tiny scratches. Also use it on clear parts - I think it gives a more realistic shine to clear parts than Pledge floor wax. First found out about it when I had to polish out a canopy that required a good bit of sanding.

Cuajete
Following.

Ekki
Watching.

Cuajete
Well done so far 👍

Finn
Looking good

Nicolas
Looking good so far, I will follow for the final leg.

Roland Sachsenhofer
Quite interesting! Well done, great work on an not so often seen subject.

Alexander
Looks nice, following.

Cuajete
Looking so good 👍

Thomas Kolb
What an absolute beast! Really beautiful. I will definitely look into the Novus scratch remover set. Does it leave some kind of residue on the plastic (like the Tamiya polishing compounds)?

Will Dossel
Thomas - easily cleaned with a lightly dampened cotton ear bud - I use the anti-static/dust/fog prep from the blue bottle as a final for the canopies. Overall, this process leaves a finish better and more natural looking than what I've seen from dipping in Future.

Nicolas
Nice result.👍

Thomas Kolb
It definitely looks intimidating. Great paintjob too, I like the subtle variation of the gray livery!

Ekki
Very good work!

Guy Rump
Great job! 👍

Mark de Boer
Looks very nice indeed!!!

Cuajete
Very nice. Congrats!

Cristian A
Wonderful job!

Michael Kohl
Well done

Villiers de Vos
Very nice.

Andrew Horton
Nice. How did you add the astro dome? That doesn't come with the kit from what I can tell, which is too bad.

Steve Brun
It was in my kit but wasn't listed on the instructions. My guess is for a later release of additin variants. Glad it was there because, like you, I didn't know how I was going to pull that one off😉

Paul Moore
Very nice presentation. Congratulations on a great build.

Steve Brun
Thanks Paul, One of my favorite books and what a great story that I can pass on when anyone looks at my shelf.

C.R. Boss 429
Well, that's a like and a follow from me. This is actually one of my favorite stories from the war.