Најважније вести
Rui Costa
је власник овог предмета
је власник овог предмета
painting mask
V-2 / Erector Meillerwagen + Hanomag SS100 for Takom KV Models 1:72
72331 2019 Нови алат 8 October, 13:42
Paul Gallagher
довршили ову ставку
довршили ову ставку
Kyushu J7W1 18-shi Intercepter Fighter Shinden (Japanese Navy Intercepter Fighter)
Hasegawa 1:72
00450 (D20) 2000 Нова кутија 8 October, 13:42
Paul Gallagher
додао је нови фотоалбум.
додао је нови фотоалбум.
15 слике
Kyushu J7W1 ShindenНов: 8 October, 13:41 1:72
The Kyūshū J7W Shinden 震電, as used by Kōichi Shikishima in Godzilla Minus One to deliver the final, fatal blow!
Пројекат: Kyushu J7W1 Shinden
8 October, 13:36
schecter87
додао је нови фотоалбум.
додао је нови фотоалбум.
8 October, 13:28
schecter87
I bought this kit about four years ago. At the time, I wanted to try car modeling, but with Revell, the experience wasn't successful. Now it's time to take it out of the box and finish it. After buying this kit, I decided I'll never buy Revell again 🙁
I bought this kit about four years ago. At the time, I wanted to try car modeling, but with Revell, the experience wasn't successful. Now it's time to take it out of the box and finish it. After buying this kit, I decided I'll never buy Revell again 🙁
8 October, 13:37
schecter87
To improve the body a bit, it would take around eight hours, but I gave up and will paint it as it is.
To improve the body a bit, it would take around eight hours, but I gave up and will paint it as it is.
8 October, 13:40
Tony May
жели овај предмет
жели овај предмет
Supermarine Spitfire C wing - Hispano 20mm cannons in fairings (two versions)
Master 1:72
AM-72-004 201x Нови алат 8 October, 13:39
Tony May
жели овај предмет
жели овај предмет
Supermarine Spitfire C wing - Hispano 20mm cannons in fairings (two versions)
Master 1:72
AM-72-004 201x Нови алат 8 October, 13:39
bughunter@scalemates
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and његов posts and agree or disagree with this user being a spammer: Go to vote page
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and његов posts and agree or disagree with this user being a spammer: Go to vote page
8 October, 13:38
Neil
додао је нови фотоалбум.
додао је нови фотоалбум.
39 слике
Italeri | No. 2703 | 1:48 | Republic F-84F Thunderstreak "i Diavoli Rossi" (WIP)Нов: 8 October, 13:35 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Пројекат: Republic F-84F Thunderstreak
50 1 February 2023, 11:58
Stefan Fraundorfer
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
5 December 2023, 16:09
Mark Sherwood
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
12 December 2023, 08:01
Neil
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
6 January, 11:14
John
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
9 February, 16:31
Neil
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
14 February, 20:54
Donald Dickson II
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
8 July, 15:14
Neil
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
8 July, 15:45
Donald Dickson II
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
8 July, 17:28
Francky
Metalisers require a certain sense of masochism 🙂 I always try to paint the metaliser last, although mskign the red in this case is challenging, I admit. In general, the sequence of paints is very important in all cases and is certainly important with pesky colors such as yellow
Metalisers require a certain sense of masochism 🙂 I always try to paint the metaliser last, although mskign the red in this case is challenging, I admit. In general, the sequence of paints is very important in all cases and is certainly important with pesky colors such as yellow
16 July, 16:19
Bill Gilman
Added a new review for:
Added a new review for:
TIE Advanced x1 Sienar Fleet Systems TIE Advanced x1 Prototype
Bandai 1:72
0191407 (2259074) 2014 Нови алат 8 October, 13:34
Neil
додао је нови фотоалбум.
додао је нови фотоалбум.
20 слике
ESCI/Humbrol | No. 4060 | 1:48 | Aermacchi MB-326K Impala (WIP)Нов: 8 October, 13:34 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Пројекат: Aermacchi MB-326K IMPALA
20 4 December 2023, 11:03
Neil
додао је нови фотоалбум.
додао је нови фотоалбум.
9 слике
Special Hobby | No. SH48017 | 1:48 | Gloster E.28/39 Pioneer (Squirt) "First British Jet"Нов: 8 October, 13:29 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Пројекат: Gloster E.28/39
4 27 August, 11:16
Neil
додао је нови фотоалбум.
додао је нови фотоалбум.
21 слике
Monogram | No. 85-5497 | 1:48 | F9F-5P Panther | Reconnaissance (WIP)1:48
WORK IN PROGRESS. UPDATED: 26/6/24...
Пројекат: Grumman F9F Panther
22 24 July 2023, 09:07
John
Watching, nice progress. I love the old Monograms, lots of work but they look pretty good.
Watching, nice progress. I love the old Monograms, lots of work but they look pretty good.
25 July 2023, 11:45
Neil
Hello John and Villiers, thanks for stopping by 🙂 and thanks for your comments and also others for likes too. I'm with you John, I like these old Monogram kits 👍 - well you know I have a penchant for vintage builds anyway! 🙂 I've never built a Panther before - such a lovely shaped airframe, I think I'm gonna enjoy.
Hello John and Villiers, thanks for stopping by 🙂 and thanks for your comments and also others for likes too. I'm with you John, I like these old Monogram kits 👍 - well you know I have a penchant for vintage builds anyway! 🙂 I've never built a Panther before - such a lovely shaped airframe, I think I'm gonna enjoy.
26 July 2023, 16:06
Mr D
додао је нови фотоалбум.
додао је нови фотоалбум.
66 слике
Romanian lAR-80 Fighter Нов: 8 October, 13:32 1:48
Decals and clear finshed
Пројекат: Hobbyboss IAR-80
26 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
18 September, 19:29
Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
18 September, 19:59
Mr D
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
6 October, 19:34
Neil
додао је нови фотоалбум.
додао је нови фотоалбум.
15 слике
Monogram | No. 5445 | 1:48 | Northrop F-20 Tigershark (WIP)Нов: 8 October, 13:32 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Пројекат: Northrop F-20 Tigershark
9 10 July, 13:14
Josafat
жели овај предмет
жели овај предмет
Porsche 911 RSR 2018 LM GTE Class Winner 991 RSR "Pink Pig"
NuNu Model Kit 1:24
PN24040 2024 Нови алат 8 October, 13:31
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sr
35
35
/sr/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo