Најважније вести

Vincent CATALAN
Hi Very nice Job
What colors and brand did you use for the camo of the hind and the under fuselage ?
Thank you.

Vetle Fosse
Hello, and thank you for your comment. I learned a lot from the build, so am looking forward to building my next Mi24 soon. I use Mr. Hobby in general, both H27 tan, and H80 Khaki green. The blue was initially painted in H45, but I had to tone it down quite a lot. You can probably go by a much lighter blue

Matti Thomaes
Nice work on this wacky herman flying contraption 👍

Robin (WhiteGlint)
A F-20! 👀
Count me in. Cheers!

Neil
Welcome Robin! 👍

Maciej Bellos
Missed it!!! Looking good!

Nicolas
Following

Skyhiker
I'm in!

Dave Flitton
Watching!!

Skyhiker
Please let us know when you upload new photos. I don't want to miss anything.

Ogre-Trombone
I found some time to work on these kits, so here are some new photos. Thanks for following!

Nicolas
The instruction isn't mentioning the stand at all. As the torpedo is under the COG I would try to fix it to the torpedo.
Very nice progres so far. 👍

Ogre-Trombone
Leaning that way, Nicolas. I don't like it, but that's probably what I'll need to do.

Mr D
Nice model 👌
Was the Devastator similar to the Dauntless??
Like the subject....will be watching 😃👍

Ogre-Trombone
@Mr D, the Devastator was a pre-War torpedo bomber that was one of the most advanced aircraft of its time. Unfortunately. it was already obsolete at the start of the war. It was slow and underpowered, and early-War tactics left its crews extremely vulnerable.

Skyhiker
The Douglas TBD Devastator, was the U.S. Navy's main torpedo bomber. It was introduced in 1935, but was obsolete by 1939. They were replaced with the Grumman TBF Avenger.

Mr D
Thanks for the info
Ogre & Skyhiker 👍👍
I didn't know much about them, the pre-war yellow wings are smart scheme 👌

Mid Franconian
Great project!

Guy Rump
Looking great, following. 👍

Casey Beckett
Great idea, the foam/tape /white glue - I'm stealing this!

Mr D
Both coming along really nicely now, the flap lines look a lot better now.
Looking like all the build updates.
Good luck with next steps 👌😁👍👍

Ogre-Trombone
Thanks, Mr D. I'm trying not to let the asymmetry bother me on the black-primed model. I wish I'd made a template or measured them instead of trying to follow the old panel lines. Still, I'm glad I made the effort.

Pure improvisation, Casey! It seems to be holding up so far. I want to do open or partially-opened canopies, so it didn't make sense to glue them in place, which is what I usually would have done.

Ogre-Trombone
It's very hot and dry where I am right now, and the paint isn't responding the way I'd like. I'll have to come back when conditions are better.

Mr D
Your doing a 👍 job, All the hard work will pay off, nice project 👍👍

Ogre-Trombone
Painting is done. Now it's on to clear coat and decals.

Guy Rump
Coming along very nicely! 👍

Skyhiker
Wow looks great

Mr D
Looks good 👌
Nice colours, the wing surface doesn't look to easy to mask.
Coming along nicely 👍👍

Gary Victory
Lovely work Orge.

Mid Franconian
They look sooo cool!

Skyhiker
I'm impressed on how well you work even with those raised elements. They look fantastic.

John
Nice start Maciej! I have this kit in the stash and following along to see how it turns out.

CaptGPF
Don't see this built very much - following!

Guy Rump
Looking good, following. 👍

Doubtingmango
Following

Mr D
Nice choice of kit, like the way your clock's/ instruments have turned out.
Was each clock individual??
Good stuff, my next kit is a Tamiya, was good quality.
Thanks for uploading 👍👍

John
Thanks Mr D. You can't go wrong with a Tamiya, at least in terms of fit. Sometimes their details get simplified and supposedly a few kits have accuracy issues, but for assembly they are great. Had to do this one after the A-20G since it was so painfully fussy to fit together. This is a nice change!

I thought about punching out each instrument individually but it's so small it would have driven me mad. Fortunately, the decal is sized perfectly to the panel so if you align it carefully, it turns out fine.

This kit doesn't specifically say it, but you can do both open and closed engine panel. Since the engine fits with pins and poly caps, you can change them out, which I intend to do. It's a nice touch and the kit is fairly cheap. Pick one up if you haven't already.

Mark Sherwood
I agree,after a frustrating build. You can go to a Tamiya kit and get back to what the hobby is about. . . Enjoyment, satisfaction, reasonable accuracy and a decent finish. Good interior John, looks like the 162 is on track as I would expect from your good self. 🤘🥸🤟🥸👍

Mr D
Brilliant thanks for the Advice John..😃👍👍. Appreciate it.
Good luck with rest of build ...nice subject 👌

Doubtingmango
Fantastic work on the instruments! Nothing like a nice Tamiya kit to keep the blood pressure down to acceptable levels

bughunter
Yep, nice work 👍

Sebastian Meyner
👍 Following 🙂

Mr D
Like the engine n wiring work ... coming along nicely 👌👍

Mr James
A really good modeller at work. Lovely work so far

John
Thanks Mr James. This is a fun little build. These recent Tamiyas are a treat to put together.

Rui S
Great work allround 👍

Mr D
Very nice 👌 some nice shading showing .
Smart n interesting model 👍👍💯%

Mark Sherwood
That's a nice representation of the162. I do like that engine, 'ar la The Fast Show ' BRILLIANT!

Alberto
It looks great 👍. Very interesting pre-shading

John
Thanks for the comments and likes everyone 👍

Doubtingmango
Great idea and beautiful execution!

John
Thanks Doubtingmango! 👍

Neil
Fantastic work indeed John!

Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.

Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.

Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼

Skyhiker
I really hate Revell conopys.

Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.

Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.

Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?

Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.

Ben M
What a terrible canopy

Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.

Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!

Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.

Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!

J35J
Great effort and progress! 👍🏻

Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.

Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.

Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍

Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.

Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.

Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.

Alexander Grivonev
Built one too back in the day, the nightfighter version. Speaking of the canopy, I like how the rear part of it is just molded to the fuselage 😄. Used some other canopy I found in my spares because the one from the kit was entirely unusable.

Mr D
Looking good 👍👍
It's a nice model when it's finished once you sort the shortcomings out.
I did get my prop to spin in the end....had to do alot of work to the cooling fan to make it run smoothly.
Good luck on next steps 😃👍

Skyhiker
If I had thought it would have been a problem I would have dry fitted everything first. But I wanted to keep the parts on the sprue for painting. It wasn't worth messing up the paint job just to get the propeller to spin. Especially since the contact points were so fragile. So in the end I glued it together so it will be stable.

Skyhiker
Working out the fuselage patterns today.