UH-72 A Lakota
Коментари
49 13 May, 18:02
JohnThanks bughunter! I should also add the molded on seatbelts Revell provided are not the best, but I got a case of the lazies and didn't replace them all with tape. To be fair,there are nine seats.
14 May, 02:50
J35JTotally missed this one until now. Really great build, paintwork and weathering 👍🏻👏🏼
7 July, 20:20
QwertzelJup, I will try to use a white primer instead of a light grey. I also want all doors open and dont know how to protect the interiour
20 July, 07:18
bughunter@Qwertzel You can try to put in a layer of foam, e.g. the one Eduard used for safely pack accessories. Cut it little big bigger then the door and squeeze the foam into the door cut out. And/or use moistened pieces of paper handkerchiefs. This is more helpful around smaller openings - I use this for example to mask the engine for painting the cowling. After it dried it gets "stable" and can easily removed after the paint job.
20 July, 10:57
JohnQwertzel, bughunter has it exactly right, that is what I did. Worked perfectly. For the rear doors, I masked the roof and floor parts with tape, then used the foam. Side doors, just a square piece of foam a little oversize as bughunter suggests. For the yellow, white primer can work but believe it or not, pink is also a good color for priming yellow areas.
20 July, 12:39
