Bulgarian Prime Movers during WWII:Fiat TL.37 with 75 mm. Schneider-Canet M1904 Field Gun
Test line-up of gun, gun portee and tractor
Weathering applied
Weathering applied
The gun on the one axle trailer
One axle trailer
Basecollor
Gun almost ready
Gun almost ready
Gun almost ready
Elevation and traverse wheels ready
Shield on
Frontal view
Test fit of wheels
Test fit of wheels
Test fit
Elevation and traverse mechanism
Elevation andf traverse mechanisms in gun cradle
Elevation gear on barrel
Proportions check
Proportions check
Proportions check
Schneider-Canet Barrel and Lock
Schneider-Canet Barrel
Scetch of barrel dimensions
Fiat TL.37 in Sofia
75 mm Schneider-Canet Field Gun M1904 at Musina memorial,Veliko Tarnovo County.Wheels are not original-they seem to come from either Soviet 152 mm ML-20 howitzer or Soviet 122 mm A-19 gun.
Коментари
17 March 2018, 08:41
Alec K
Sweet. It looks like the historical specimens are not in the best of environs to secure their long-term survival. On the other hand, getting close to take measurements should be a snap 😉 👍
Sweet. It looks like the historical specimens are not in the best of environs to secure their long-term survival. On the other hand, getting close to take measurements should be a snap 😉 👍
26 March 2018, 00:11
Angel Yovtshev
It is troika actually-the gun, an one axle trailer(something like Sd.Anh.3, but domestic design) and the tractor 🙂
Thanks, Olly!
It is troika actually-the gun, an one axle trailer(something like Sd.Anh.3, but domestic design) and the tractor 🙂
Thanks, Olly!
9 April 2018, 17:24
Alec K
Wow, just excellent scratchbuilding Angel. The elevation wheels... did you make those?
Wow, just excellent scratchbuilding Angel. The elevation wheels... did you make those?
11 April 2018, 11:21
Angel Yovtshev
Yep!
0,01 mm copper sheet(cut like cross to form the struts) and 0,6 mm copper wire( soldered on both ends to form the wheel, then pressed sideways in a vise). Both parts joined by soldering.
Thanks Alec K!
Yep!
0,01 mm copper sheet(cut like cross to form the struts) and 0,6 mm copper wire( soldered on both ends to form the wheel, then pressed sideways in a vise). Both parts joined by soldering.
Thanks Alec K!
11 April 2018, 13:17
Alec K
Thanks for the info Angel. I admire your crafting skills, simply excellent. Thanks for sharing your builds on Scalemates 👍
Thanks for the info Angel. I admire your crafting skills, simply excellent. Thanks for sharing your builds on Scalemates 👍
12 April 2018, 11:53
Angel Yovtshev
Thanks Timothy!
I've started construction on the FIAT TL.37 tractor last weekend.
Intend to detail the chassy as much as possible.
Thanks Timothy!
I've started construction on the FIAT TL.37 tractor last weekend.
Intend to detail the chassy as much as possible.
18 April 2018, 08:00
Project info
41 слике