Макетарска база података | Менаџер залиха
RoggyCGD
Dmitriy Andreeshchev (RoggyCGD)
RU

Ictineo II

Коментари

11 January 2019, 11:06
Dmitriy Andreeshchev
Hello, everyone! Started another wooden kit. This time it's a model of pioneering submarine of Narcís Monturiol. The kit is very nice and well detailed, though it should be assembled carefully and slowly. Many parts require heavy pre-shaping due to the flat laser-cut nature. Also, I'm using 0.7mm brass nails from Amati. As you can see, I've installed porthole edgings using them - it was a long process, as it has required the amount of 176 nails 🙂 Still, the assembly is very enjoyable! Also, finished the planking yesterday. The upper part of the tail is rough, cause it will be covered with copper plate.
11 January 2019, 11:15
Jean Pierre CULIS-FERY
Bonjour, Ton travail est absolument superbe. Bravo.
11 January 2019, 12:48
Bart Goesaert
looking good, do they have the same model, but with interior too? Name rings a bell somehow.
11 January 2019, 13:03
Dmitriy Andreeshchev
Bret, there was another model, with interior, but from different manufacturer - Anfora, if I remember right.

Jean, merci beaucoup!
11 January 2019, 13:10
Acki
Great Job! Like it very much!
11 January 2019, 16:40
Neuling
I fully agree with Acki! Will have to google this submarine.
11 January 2019, 16:53
Dmitriy Andreeshchev
Thank you, mates!
12 January 2019, 12:05
Dmitriy Andreeshchev
An update: The Ictineo II has received several shiny metal parts! Although those look beautiful and really contribute to the overall look, they are a pain, especially that copper tail plate. The problem, you see, is that metal parts here are very thick (it seems, that all metal parts are pre-cut, not PE) and therefore quite rigid. Yep, they are nailed just fine, but only there, where are structural ribs inside - obviously, thin hull planks just can't hold the nails, while the metal part is being stressed by it's own rigid nature. I've pre-bent them as much as I could, but, still, some cyano was required and few nails here and there tend to drop from holes, so I glue them into their places, when I see another one starting to fall out. Also, I've washed the hull with Tamiya brown panel accent color.
12 January 2019, 12:05
René "Lord Bilbo" Bartholemy
Looking very nice! I'm looking forward for the next steps.
12 January 2019, 13:20
Bernhard Schrock
Very interesting object and unusual kit & material. Please a front row seat🙂
12 January 2019, 20:23
Acki
You nailed it!
13 January 2019, 10:42
Alexander Grivonev
Now this is what you don't see every day 👍
13 January 2019, 11:12
Ben M
Watching this, very interesting kit and build.
13 January 2019, 15:25
Spanjaard
going really well!
16 January 2019, 20:34
Dmitriy Andreeshchev
Thank you, mates!
22 January 2019, 21:21
Dmitriy Andreeshchev
An update: addes several details, including the side hatches and frontal lamps. Continuing to work on a propulsion system - made a screw.
22 January 2019, 21:22
René "Lord Bilbo" Bartholemy
Comming along very nicely!
22 January 2019, 22:11
Miquel Morell Mañé
I often step by the side of the real thing when I walk through my city: Barcelona! cityseeker.com/es/barcelona/379863-ictineo-ii
23 January 2019, 15:13
Spanjaard
certainly a nice thing to see Miquel, but unfortunately it is a replica 🙁..... the real one had a rather ignominious end as it was scrapped after creditors took it from Monturiol when his company run out of money 🙁 🙁
with its air independent propulsion for underwater navigation it was so way ahead of its time..... what a pity
23 January 2019, 16:44
Ben M
One of the things I enjoy about this site is when an unusual subject pops up like this, there is an opportunity to read about a history that I did not know.
23 January 2019, 19:21
Dmitriy Andreeshchev
Thanks for your attention towards project, mates! By the way, another update: finally, I've installed the whole propulsion & rudder system on the model - rather sophisticated and difficult to build sub-assembly, but it's surely a gem of the build. Now, the only thing left are the railings!
24 January 2019, 21:19
Dmitriy Andreeshchev
Added photos of the DIY railings, made from brass tubes with the soldering iron
25 January 2019, 11:46
Dmitriy Andreeshchev
Hello everyone! The model is complete!
25 January 2019, 12:00
Alexander Grivonev
Отличная работа!👍
25 January 2019, 14:31
Ben M
That is a beautiful and unusual build! Thank you for sharing it with us.
25 January 2019, 20:24
Spanjaard
beautiful!
30 January 2019, 22:36
René "Lord Bilbo" Bartholemy
This submarine could have come straight out of a Jules Vernes novel. The strangest feature in my humble opinion, is the double bladed propeller. Weird! But overall, this is one of a heck of a nice job!
31 January 2019, 14:51

Album info

Edit project
My second attempt at wooden ship-building, though this time, it's a pioneering submarine of Narcís Monturiol

51 слике
1:46
Завршено
1:46 Ictineo II (Wooden Kit 108WK)

Сви албуми

Прикажи све албуме »