WIP - SPz Puma on SLT-56 Transporter
Boxes
And content of it
Starting with cab
Building frame - a lot of pin marks
On top I've put an Eduard PE part
First two axles
And cab
And two more axles
Comparing of Real Model wheels with kit rubber one
Not very good product
Cab almost done. Only some pigments left to add
Cabin attached - ugly as hell 😉
Top view
Adding equipment and first fender
Some more equpment with pipes
Adding more pipes and wires
Adding more pipes and wires
Winches with wires
Doing trailer
A lot of huge pin marks
Axles
Goose neck
With axles
Dry fit - long kit - about 55-56cm (22inches)
Got some LEDs for warning lights
Doing winches and rest of piping
Doing winches and rest of piping
Conrete pipe elements to put on base
Painting this terrible resin wheels
Initial fit
Masking wheels
And painting it
Primed Puma
Primed tractor
Preshading
Preshading
First color - free hand painted
trying brown one
Base painted trailer and turret
Base color finished
Different background - different shading
Different background - different shading
Different background - different shading
With decals and wash
With decals and wash
All details added
All details added
All details added
All details added
All details added
Weathering done on Puma
Weathering done on Puma
Weathering done on Puma
Puma with some corrections
Base with first layer
Addisng some dirt and mud
Trailer wheels
Addisng some dirt and mud
Wheels glues
Front view
Trailer with wheels
Rear view
Needed some chains with hooks, so I had to print some hook by myself
Chains and rods
Puma on the trailer, need some painting
Rear side ready
Some chains and rods an the trailed.
Last item added
Last item added
Коментари
1 26 April 2019, 20:10
Michael HickeyI'm in on this one, one tip though be very gentle with the windshield because it will snap.
27 April 2019, 00:45
Przemek PrzybulewskiThanks Micheal for tip, I was not aware of it. Will try to be extra careful.
Thank you Patrick.
It came to my attention that this version of Leo is too heavy. Trailer max load is 56 tons but 2A7 version is way more than 60 tons. I'm wondering if instead of Leopard include new Puma from Rye Field Model.
How do you think?
28 April 2019, 18:15
Michael HickeyWhen I was researching for my build I found that this particular trailer is for on road use and primarily with the German Leopard 2 A6. I have a photo of an updated SLT-56 with the extra storage compartments in Afghanistan with a AFV on the trailer. The problem you'll have is that it uses a different trailer, one that uses the same size wheel as the SLT-56. I have also seen a photo with a SLT-56 with another SLT-56 on the trailer. That was an idea that I had when I bought another kit of eBay but Unfortunatly it never turned up in the mail.
When I get back into mine I plan on putting a MAN 5t mil gl on my trailer, I got that idea when I saw how cool it looked when another Scalemate built the same thing.
29 April 2019, 01:39
Przemek PrzybulewskiI do not have plans for this trailer nor new or updated 🙁 that's why I will stick to Puma.
As for the Man on the trailer I think I know which build this is.
2 May 2019, 16:24
Michael HickeyBeautiful work so far Przemek, I'm going left field with my trailer load, pics to come later today.😄
2 May 2019, 22:33
Przemek PrzybulewskiI've started some piping and wiring. Half work done. Rest will be done after glueing both winches
15 May 2019, 18:39
Przemek PrzybulewskiThanks Micheal - I build Puma, quite easy and straightforward build. I was quite surprised with quality. No pin marks, minimal seam lines, great fit, very nice plastic. High quality parts and details and not expensive. Only disadvantage is not movable or even positionable suspension and wheels which had to be glued (no polycaps or other way of fit). Overall very good model - comparable to Meng (but with less options)
28 May 2019, 11:03
Thomas K.For my taste is the color to light, especally the Brown. What Brand do you need? Is my opinion😉
5 February 2020, 10:55
Przemek PrzybulewskiThanks Michał.
Thomas - you're right. Colors on photo are too bright, even black looks like dark grey. I used Tamiya NATO colours - XF-67, XF-68 and XF-69 so should be proper ones. Anyway this is only base color. Later I will add some highlights, some shading. filter, wash and oils. At the end they will look quite faded and I hope accurate 😉
5 February 2020, 12:32
Thomas K.i am iritate @ Michal; your slt looks darker, espacelly the brown! no problem; it is Przemek decision what color he needed! 😉
6 February 2020, 16:49
Przemek PrzybulewskiI finished the base color painting. I've added some presiding and highlights.
Last there photos were taken with the same vehicles but on different backgrounds. White-grey BG gave the most accurate Colors but still those ant not 100% correct. Brown looks to red.
6 February 2020, 18:57
Przemek PrzybulewskiThank you. Models took most of the space on the base so only some wooden poles, maybe few bushes. Will see 🙂
19 April 2020, 21:36
Przemek PrzybulewskiThank you all. I've added some hooks&chains on the truck, and some fuel stains.
Still thinking about the empty space near the truck - I have to put there something.
25 April 2020, 09:45
