Зид
Wall
bossy122
је власник овог предмета
је власник овог предмета
Peugeot 206 WRC "ESSO" MC '00 #9 #10 #17 - Sanremo '00 #9 #10 (Panizzi G/Panizzi H winner) #16
C.B · COM. 1:24
24.110 4 August, 20:01
July 29, 2024
July 28, 2024
July 20, 2024
July 9, 2024
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
3 слике
Peugeot 206 2000 Rally San Remo Panizzi1:24
I thought I could just throw the prepainted pieces of this kit all together and that has not been the case. The body had...
Пројекат: Peugeot 206 2000 Rally San Remo Panizzi
8 5 July, 20:08
Martin Oostrom
Can't you strip the sprues as a whole of the paint? Dip them in a bath of paint stripper? Might be a whole lot easier than sanding each piece
Can't you strip the sprues as a whole of the paint? Dip them in a bath of paint stripper? Might be a whole lot easier than sanding each piece
9 July, 06:15
bossy122
Most of the pieces are under carriage, so they're not that visible......but I stay awake at night knowing there are seams and that they must be eliminated! I think I botched the body paint job and I hadn't noticed on its original project. I just went over the lint - think HAIR - with 600 to 2000 and that took care of it. Mostly, I just thought it was funny that whomever I bought this kit from had gone to that much trouble to paint pieces ON the sprues with a brush, only to be done over with a rattlecan OFF the sprues.
Most of the pieces are under carriage, so they're not that visible......but I stay awake at night knowing there are seams and that they must be eliminated! I think I botched the body paint job and I hadn't noticed on its original project. I just went over the lint - think HAIR - with 600 to 2000 and that took care of it. Mostly, I just thought it was funny that whomever I bought this kit from had gone to that much trouble to paint pieces ON the sprues with a brush, only to be done over with a rattlecan OFF the sprues.
9 July, 06:23
Martin Oostrom
I feel your pain. I'm currently sanding tanks on a truck. Tanks that will never be seen, yet I've spent a few hours already on them.
I feel your pain. I'm currently sanding tanks on a truck. Tanks that will never be seen, yet I've spent a few hours already on them.
9 July, 06:25
July 5, 2024
June 30, 2024
June 29, 2024
June 20, 2024
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
15 слике
Lancia Super Delta Liatti 1992 Rally New Zealand1:24
Even got those tiny PE windshield brackets on. For anyone who hasn't tried a wax pencil for applying microscopic pieces;...
All comments (8) » 28 19 March, 01:54
bossy122
There are a few 3D printed front grilles out there that have separated all the parts to make painting the 3 different colors easier. The problem I had with the foil is that I can never get that stuff to lay down smoothly.
There are a few 3D printed front grilles out there that have separated all the parts to make painting the 3 different colors easier. The problem I had with the foil is that I can never get that stuff to lay down smoothly.
17 June, 16:43
bossy122
One thing that bugged me with this kit is how "shallow" the seam lines are. I wasn't able to fill them all in with Panel Line paint.
One thing that bugged me with this kit is how "shallow" the seam lines are. I wasn't able to fill them all in with Panel Line paint.
19 June, 03:32
June 19, 2024
bossy122
је власник овог предмета
је власник овог предмета
Lancia Delta S4 '86 Monte Carlo Rally Ver.
Beemax Model Kits 1:24
B24020 (Aoshima 098851) 2018 Нови алат 19 June, 05:30
June 14, 2024
June 10, 2024
May 31, 2024
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
11 3 May, 04:07
bossy122
I hope my ADD doesn't strike! So many models, so hard to focus on one. It'll be tackling the rear wing that will be the hurtle on this one. Four wings to try and get to remain together until completion. OR....I can cheat and use the 99 rear wing, which has different sized end plates, but I have some Museum Collection JPS markings to correct for that. Still debating.....
I hope my ADD doesn't strike! So many models, so hard to focus on one. It'll be tackling the rear wing that will be the hurtle on this one. Four wings to try and get to remain together until completion. OR....I can cheat and use the 99 rear wing, which has different sized end plates, but I have some Museum Collection JPS markings to correct for that. Still debating.....
18 May, 06:42
May 26, 2024
May 17, 2024
May 15, 2024
May 14, 2024
May 13, 2024
August 10, 2024
April 29, 2024
April 27, 2024
April 16, 2024
April 13, 2024
April 4, 2024
bossy122
је власник овог предмета
је власник овог предмета
Brabham BT58 GP of Japan (1989)
Studio27 1:20
ST27-HP2025 4 April, 01:54
March 31, 2024
March 30, 2024
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Brabham BT58 GP of Japan (1989)
Studio27 1:20
ST27-HP2025 30 March, 04:54
March 19, 2024
March 4, 2024
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
All comments (28) » 36 5 April 2022, 00:14
Rui S
Great result indeed. Beautiful model 👍
Hope your lungs recover to 100%. I have had great difficulty recovering mine.
Great result indeed. Beautiful model 👍
Hope your lungs recover to 100%. I have had great difficulty recovering mine.
4 March, 01:33
February 29, 2024
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
1 слике
Porsche 917K 1970 Le Mans1:24
Getting those decals lined up correctly turned out WAY more challenging than anticipated. For whatever reason, Museum Co...
Пројекат: Porsche 917K 1970 Le Mans
7 29 February, 04:44
bossy122
Thanks. Only wish it hadn't taken two attempts. On the first attempt, I couldnt get the 2 outer stripes to line up correctly at all. This time around, I applied the BIG three pronged forward decal and then quickly did the aft decal and had to adjust the 2 at the same time.
Thanks. Only wish it hadn't taken two attempts. On the first attempt, I couldnt get the 2 outer stripes to line up correctly at all. This time around, I applied the BIG three pronged forward decal and then quickly did the aft decal and had to adjust the 2 at the same time.
29 February, 17:25
February 26, 2024
February 5, 2024
bossy122
је власник овог предмета
је власник овог предмета
Porsche 917K '70 LM Win (for Fujimi)
Museum collection 1:24
D961 5 February, 23:21
January 31, 2024
bossy122
је власник овог предмета
је власник овог предмета
Porsche 917 K #023 "Shell" Winner Le Mans´70 #23 Herrmann/Attwood
Fujimi 1:24
12173 (HR-5) 2003 Нови алат 31 January, 07:30
January 28, 2024
January 23, 2024
January 20, 2024
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Porsche 917 K #023 "Shell" Winner Le Mans´70 #23 Herrmann/Attwood
Fujimi 1:24
12173 (HR-5) 2003 Нови алат 20 January, 06:49
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Porsche 917K '70 LM Win (for Fujimi)
Museum collection 1:24
D961 20 January, 06:49
January 17, 2024
January 15, 2024
January 13, 2024
January 6, 2024
August 10, 2024
January 3, 2024
December 28, 2023
bossy122
је власник овог предмета
је власник овог предмета
Porsche 917 K #023 "Shell" Winner Le Mans´70 #23 Herrmann/Attwood
Fujimi 1:24
12173 (HR-5) 2003 Нови алат 28 December 2023, 02:56
bossy122
је власник овог предмета
је власник овог предмета
Porsche 917K '70 LM Win (for Fujimi)
Museum collection 1:24
D961 28 December 2023, 02:55
December 26, 2023
December 24, 2023
bossy122
је власник овог предмета
је власник овог предмета
Ferrari F399 Tobacco Decal
Tabu Design 1:20
TABU20025 24 December 2023, 04:12
December 23, 2023
December 20, 2023
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Porsche 917 K #023 "Shell" Winner Le Mans´70 #23 Herrmann/Attwood
Fujimi 1:24
12173 (HR-5) 2003 Нови алат 19 December 2023, 18:37
December 19, 2023
December 14, 2023
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Ferrari F399 Tobacco Decal
Tabu Design 1:20
TABU20025 14 December 2023, 05:30
December 11, 2023
December 7, 2023
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
3 слике
Lotus 1011:20
Out of mothballs, see if I can get anywhere with it. Got the wheels mocked in place, that's a start...
Пројекат: Lotus 101
4 31 August 2019, 01:30
bossy122
Despite S27s CLEAR black and white photo, I got the rear suspension assembled. Note:the pieces for the drive sgafts they gave me are easily 2-3 cm too short. I have some spare brass rod that, while not the correct diameter, will be the correct length.
Despite S27s CLEAR black and white photo, I got the rear suspension assembled. Note:the pieces for the drive sgafts they gave me are easily 2-3 cm too short. I have some spare brass rod that, while not the correct diameter, will be the correct length.
29 November 2020, 02:19
November 20, 2023
November 12, 2023
November 9, 2023
November 8, 2023
bossy122
I am new to this GB thing on this site and am unclear on where the #group-build channel is. Is that on this site or a social media site, in which case I will have to excuse myself as I avoid social media like the plague.....yuck!
I am new to this GB thing on this site and am unclear on where the #group-build channel is. Is that on this site or a social media site, in which case I will have to excuse myself as I avoid social media like the plague.....yuck!
Pro Race Car Group Build
8. Август 2023 до 31. Јануар 2024
8. Август 2023 до 31. Јануар 2024
8 November 2023, 03:49
Matteo Pescarin
Hey Bossy, the voting will happen on a dedicated Discord server, essentially a text chat with several topic-specific channels. The server is entirely dedicated to scale modelling for cars and trucks, plus a few others for off-topic chats and other hobbies. Think of it like a forum, but realtime 🙂 The link I shared in the description of the event will allow you to join the server itself and register within it.
Hey Bossy, the voting will happen on a dedicated Discord server, essentially a text chat with several topic-specific channels. The server is entirely dedicated to scale modelling for cars and trucks, plus a few others for off-topic chats and other hobbies. Think of it like a forum, but realtime 🙂 The link I shared in the description of the event will allow you to join the server itself and register within it.
8 November 2023, 20:53
bossy122
је власник овог предмета
је власник овог предмета
Mitsubishi Lancer Evo. VI Rally '1999 Option
Decalpool 1:24
DP074 8 November 2023, 03:39
November 7, 2023
October 31, 2023
bossy122
означио овај артикал као по наруџби
означио овај артикал као по наруџби
Mitsubishi Lancer Evo. VI Rally '1999 Option
Decalpool 1:24
DP074 31 October 2023, 05:19
October 28, 2023
October 27, 2023
October 16, 2023
October 15, 2023
bossy122
додао је нови фотоалбум.
додао је нови фотоалбум.
21 слике
G C Martini Ferrari 312T 19761:20
For the life of me, I could not get the cowling to fit flush with the sidepod panels, but here it is....."done'.
Пројекат: Ferrari 312T G C Martini
All comments (7) » 20 5 August 2017, 08:06
bossy122
Thanks.
A little heads up for anyone building this kit: the brackets that go under the front wing don't fit properly. I had to sand down the edges to get them in. And I suggest attaching them prior to any work on the front wing so as to handle the wing as little as possible.
Thanks.
A little heads up for anyone building this kit: the brackets that go under the front wing don't fit properly. I had to sand down the edges to get them in. And I suggest attaching them prior to any work on the front wing so as to handle the wing as little as possible.
15 October 2023, 22:06
October 9, 2023
October 8, 2023
September 20, 2023
September 17, 2023
September 15, 2023
wnolder.php?lang=sr
2023-09-15 10:34:56
2017-03-10 08:20:20
30719
/ajax/wnolder.php?lang=sr&sd=2023-09-15 10:34:56&md=2017-03-10 08:20:20&filter=&w=30719
todo