Макетарска база података | Менаџер залиха
whiteladder
Mark Broughton (whiteladder)
GB

Supermarine Walrus

Коментари

142 25 May 2021, 08:10
David Taylor
Got my seat.
25 May 2021, 14:10
Daniel Klink
Following too!! Hi David
25 May 2021, 16:10
Steve Desarzens
Crazy project ! This is going to look superb !!!
25 May 2021, 16:24
Dietmar Bogatzki
Fantastic idea and a great start following 👍
25 May 2021, 16:38
David Taylor
Hi Daniel,one of these days I will figure out how to upload my paltry offerings to you masters.
25 May 2021, 18:17
David Taylor
Pic 21 looks fantastic.
25 May 2021, 18:18
Olaf Voigt
Wow what a build...you got my attention for sure
25 May 2021, 19:32
Jens
a great project and what you can see is absolutely great 👍 👍 👍
26 May 2021, 09:59
Vincent
This is great. looking forward to this one.
26 May 2021, 12:17
Peppy
Whoa. Mark, this is a show stopper right here.
26 May 2021, 17:20
David Taylor
If you build a Kingfisher you could swap over occaisonally.
26 May 2021, 17:30
Mark Broughton
Thanks for all your kind comments, its a lot of fun doing this build and the airfix kits is brilliant.
26 May 2021, 17:50
David Taylor
Will you be printing the rest of the ship or are you staying with the turret hehe.
26 May 2021, 17:55
Mark Broughton
David, I think my wife might have something to say about that🙂, but hey maybe when the kids leave home.
26 May 2021, 17:59
David Taylor
i was a modelling nomad at home until my daughter left
26 May 2021, 19:39
David Taylor
Which ship is this based on Mark.
15 June 2021, 20:31
Mark Broughton
HMS Resolution
15 June 2021, 20:40
Gary Kitchen
Outstanding and inspirational. Great build gallery. Thanks for sharing Mark. Two 3D printers must be a game-changer?
15 June 2021, 20:51
Mark Broughton
Hi Gary, because they print using 2 different methods they compliment each other really well. The fda printer is great for larger models, that don't need such high resolution. The sla printer is ideal for small high res items, but is much slower.
15 June 2021, 22:15
Nathan Dempsey
Epic build! The interior on your Walrus looks great.
20 June 2021, 22:05
Alexander
Astonishing work, really inspirational and a great depiction of true (and very modern) craftmanship - awesome! 👍👍👍
21 June 2021, 11:22
Thomas Bischoff
awesome work! 👍 👍 👍
21 June 2021, 12:03
Mark Broughton
Thanks you gents for taking the time to comment. Cheers
21 June 2021, 12:14
bughunter
Good use of 3d printer, not to replace a (Walrus) kit but adding nice parts around for a unique display. Fantastic project!
You should mention the ship name somewhere 😉
21 June 2021, 12:42
Mark Broughton
Bughunter I have already started making some covers for the foam, in grey acrylic using image transfer paste to put the name on the front. I will post some pics when I get home from work.
21 June 2021, 13:20
David Taylor
Catapult looks brill.
21 June 2021, 16:51
David Taylor
Been a while looking good.
24 October 2021, 19:17
Spanjaard
Impressive. Certainly s different project
24 October 2021, 19:38
Robin (WhiteGlint)
Wow, impressive project! 👍
The turret looks stunning. It looks like this project has two main characters 😉
26 December 2021, 08:46
Mark Broughton
Cheers thanks for commenting, hoping to put on some more updates soon.
26 December 2021, 18:00
Ben M
Really amazing work!
29 December 2021, 20:32
Dietmar Bogatzki
Awesome work 👍 👍
30 December 2021, 08:33
David Taylor
Fantastic.
5 January 2022, 15:45
Mark Broughton
Dietmar and Ben thanks for commenting
5 January 2022, 15:46
Alec K
This is an excellent project, I really like the combination of different techniques. Thanks for sharing 👍
5 January 2022, 20:13
Tim
Fantastic skill and use of CAD and printing.
8 January 2022, 19:45
Rewop
Very impressive.
8 January 2022, 21:39
David Taylor
Catapult looks brill.
9 January 2022, 18:20
Rui S
Great work 👍
14 February 2022, 00:19
Villiers de Vos
Very creative. No need to wait for a specific kit to augment a project anymore. Your paint work and weathering is also very good.
14 February 2022, 01:18
Michael Kohl
Ah, a quick little base for the Walrus! 😉
Massive. Impressive.
8 March 2022, 14:44
gorby
That's fabulous! One of the best models I've seen so far this year.
8 March 2022, 15:21
David Taylor
Worth the wait,well done.
8 March 2022, 15:33
Alec K
I am just blown away by this build. It's amazing! Curious how many hours do you have invested thus far?
8 March 2022, 15:38
Mark Broughton
Thanks to everyone who has commented, it's very much appreciated.

Alex it's been a lot, but there have been big gaps where I didn't work on it so I'm really not sure. My wife got seriously ill last year, so modelling took a back seat for a while.
8 March 2022, 16:25
Dietmar Bogatzki
Absolute fantastic in every way Mark 👍
8 March 2022, 16:37
Alec K
Thanks Mark. I would be surprised you are under 1000 hours. Hope your wife is getting better 👍
8 March 2022, 17:45
Capt Bellinger
Utterly superb work; a real piece of art. Congratulations. 👍
8 March 2022, 19:52
Mark Broughton
Alec you are probably right there with 1000!!! Also my wife has made a full recovery, luckily we live within 30 minutes of one of the top Neurological units in the UK and they saved her life.

Cheers Capt Bellinger 👍
8 March 2022, 20:28
Vincent
Just amazing!!! Great work.
8 March 2022, 20:54
Simon Nagorsnik
Just fantastic😲
It's very difficult to find words that would describe what was seen in an appreciative manner😁
8 March 2022, 20:58
Hans-Jürgen Haag
Great work!!! Fantastic !
9 March 2022, 08:07
Tini Hendriks
Awesome! Respect! 🎩
9 March 2022, 08:19
Robin (WhiteGlint)
Family is most important. Very good to hear that your wife has fully recovered 👍

This project ist just stunning and the result is as well.
Cheers!
9 March 2022, 08:52
Neuling
Great work indeed!
9 March 2022, 09:49
Jv
Lovely work space you got
And a very impressive build
I would love to have all your toys
Sad to say if I had them I wouldn't know how to use them
But thanks for sharing
And will look forward to see the rest of the build
9 March 2022, 10:05
Neil
I just wanted to add my own great admiration for this Mark. You are obviously a highly skilled modeller. I am interested in seeing the integration of new tech with old tech; as this is similar to my working day to day. And I too am also extremely jealous of your availability of such a clean working habitat! 😜 Kudos to you for completing and showcasing a highly enjoyable and informative album 👏
9 March 2022, 12:14
Guy Rump
Hugely impressive modelling and dio. 👍
9 March 2022, 14:00
Mark Broughton
Just want to say thanks to you all for commenting, it's gratefully recieved.
9 March 2022, 15:35
Gary Victory
Beautifully done Mark, fantastic detailed build.
10 March 2022, 07:22
Alexander
Beautiful result, it was a joy to follow it along! Definitely one of the top builds so far on this site! 👍👍👍
17 March 2022, 00:56
Mark Broughton
Gary, Alexander thank you
17 March 2022, 07:07
Lochsa River
wow...that is cool...love the Walrus...love a floatplane...this dio is special
17 March 2022, 08:03
Gary Kitchen
Just opened my latest copy of Airfix Model World and saw this amazing build featured in the Display Case section. I recognised it immediately and came straight here to double check. Inspirational stuff Mark. 👍
1 May 2022, 06:44
Mark Broughton
Cheers Gary, haven't got my copy yet, will have to check the shops tomorrow.
1 May 2022, 16:36
Spanjaard
Congratulations on getting it published, well deserved
1 May 2022, 20:30
Filip
Great idea and execution.
2 May 2022, 07:04
History Maker
Superb work. Where is the catapult and turret from?
17 April, 20:51
David Taylor
Well done.
18 April, 14:18
"Sparky"
My vote for build kit w/3D kit of the year!
18 April, 14:23
Robert Podkoński
WOW!
18 April, 17:41
Pietro De Angelis
Mamma mia what a show!
Admiration and respect, congrats!
18 April, 19:06
Mark Broughton
@History Maker The White metal trolley is from a company called Neomega, everything else I designed and printed from scratch.

David, Sparky, Robert and Pietro thank you all for commenting its very kind of you to take the time.
18 April, 20:05
John Ballman
Holycow, that is impressive. Thanks for sharing your work.
JB
19 April, 04:17
Hans-Jürgen Haag
👍👍👍👍
19 April, 07:05
Mark Broughton
John and Hans thanks very much.
19 April, 18:28

Album info

1/48 Supermarine Walrus, mounted on its catapult launcher. 3d printed turret, and catapult rail.

121 слике
1:48
Завршено
1:48 Supermarine Walrus Mk.I (Airfix A09183)1:48 Walrus Mk.I (Eduard BIG49182)

Сви албуми

Прикажи све албуме »