Saab 35 Draken, Acro Deltas

1
July 26, 2021
An overview of the kit.
2
July 26, 2021
This is the version of the Acro Deltas I am going to build.
3
July 26, 2021
I started to cover the outboard wings with supermaket acquired aluminum foil.
4
July 26, 2021
The plastic injection is awful and very thin.
5
July 26, 2021
The canopies does not physically match. I will have to solve this problem.
6
July 26, 2021
Dry fit with the outboard wings and the fuselage section.
7
July 26, 2021
Started to cover the fuselage with aluminum foil.
8
July 26, 2021
Dry fit with the outboard wings and the fuselage section, already aluminum covered.
9
July 26, 2021
Dry fit with the outboard wings and the fuselage section, already aluminum covered.
10
July 26, 2021
Dry fit with the outboard wings and the fuselage section, already aluminum covered.
11
July 30, 2021
I had to reprint the decals, as they have just broke when placed in water.. 🙁
12
July 30, 2021
This is the round wooden base I made, printed the Swedish roundel in adhesive paper, and placed it on the top of it. Also I have used an inox bicycle spoke to link the base and the plane.
13
July 30, 2021
I epoxy glued the threaded end of the spoke to the model rear exhaust, in order to place the spoke afterwards.
14
July 30, 2021
I epoxy glued the threaded end of the spoke to the model rear exhaust, in order to place the spoke afterwards.
15
August 2, 2021
Unfortunately the decals I printed became kind of translucent. But as there is no solution, I will leave them this way..
16
August 2, 2021
The yellow transparency od the swedish roundel over the silver foil, gave it a golden look. Although not accurate, it made a beautiful effect.
17
August 2, 2021
Finished model and base.
18
August 2, 2021
threaded connection to the wire.
19
August 2, 2021
Finished model and base.
20
August 2, 2021
Finished model and base.

Коментари

7 26 July 2021, 13:54

Robert Podkoński
I presume you like challenges, Gustavo 🙂 Good work so far!

30 July 2021, 17:38

Julian Herrero aka Yuri
Good work on a dog of a kit ... Congratulations

2 August 2021, 14:08

Alexander
Looks really nice with this very basic metallic look! 👍

2 August 2021, 19:36

Album info

Construction of 60's/70's 1:72 kit os Saab 35 from Revell. It is my first try of bare metal foil covering. Will be built in flight position, and installed in a customized support.

Acro Deltas Saab 35 Draken

20 слике

1:72

Завршено

Сви албуми

Прикажи све албуме »